ipq40xx: Remove phy reset gpio from Cisco Meraki MR33

There is currently no code to read the phy reset gpios for the ethernet
PHY. It would also have been better to use the more common name
"phy-reset-gpios" for this property.

Signed-off-by: Sven Eckelmann <[email protected]>

diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
index ef6230126f477fc7384f3eb6dcc34e513c276725..a709ae96bd0cddf6f0c5f1b15249c013adfd0ead 100644 (file)
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
@@ -60,7 +60,6 @@
                        status = "okay";
                        pinctrl-0 = <&mdio_pins>;
                        pinctrl-names = "default";
-                       phy-reset-gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
                        /delete-node/ ethernet-phy@0;
                        /delete-node/ ethernet-phy@2;
                        /delete-node/ ethernet-phy@3;