Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
buffer_len = le16_to_cpu(ep->wMaxPacketSize);
interval = ep->bInterval;
- PDEBUG(D_CONF, "found int in endpoint: 0x%x, "
- "buffer_len=%u, interval=%u",
+ PDEBUG(D_CONF, "found int in endpoint: 0x%x, buffer_len=%u, interval=%u",
ep->bEndpointAddress, buffer_len, interval);
dev = gspca_dev->dev;
err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i]));
- PDEBUG(D_CONF, "Reading sensor register "
- "0x%x containing 0x%x ", address, *i2c_data);
+ PDEBUG(D_CONF, "Reading sensor register 0x%x containing 0x%x ",
+ address, *i2c_data);
}
return err;
}
MODULE_LICENSE("GPL");
module_param(force_sensor, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(force_sensor,
- "forces detection of a sensor, "
- "1 = OV9650, 2 = S5K83A, 3 = S5K4AA, "
- "4 = MT9M111, 5 = PO1030, 6 = OV7660");
+ "forces detection of a sensor, 1 = OV9650, 2 = S5K83A, 3 = S5K4AA, 4 = MT9M111, 5 = PO1030, 6 = OV7660");
module_param(dump_bridge, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup");
module_param(dump_sensor, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers "
- "at startup providing a sensor is found");
+MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers at startup providing a sensor is found");
#define MR97310A_MIN_CLOCKDIV_MAX 8
#define MR97310A_MIN_CLOCKDIV_DEFAULT 3
MODULE_DESCRIPTION("GSPCA/Mars-Semi MR97310A USB Camera Driver");
MODULE_LICENSE("GPL");
/* Frame end */
if ((in[9] + 1) * 8 != gspca_dev->pixfmt.width ||
(in[10] + 1) * 8 != gspca_dev->pixfmt.height) {
- PERR("Invalid frame size, got: %dx%d,"
- " requested: %dx%d\n",
+ PERR("Invalid frame size, got: %dx%d, requested: %dx%d\n",
(in[9] + 1) * 8, (in[10] + 1) * 8,
gspca_dev->pixfmt.width,
gspca_dev->pixfmt.height);
}
PDEBUG(D_PROBE,
- "Pixart PAC207BCA Image Processor and Control Chip detected"
- " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
+ "Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x%04X:0x%04X)",
+ id->idVendor, id->idProduct);
cam = &gspca_dev->cam;
cam->cam_mode = sif_mode;
#define PAC7302_EXPOSURE_DEFAULT 66 /* 33 ms / 30 fps */
#define PAC7302_EXPOSURE_KNEE 133 /* 66 ms / 15 fps */
-MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Thomas Kaiser
[email protected]");
MODULE_DESCRIPTION("Pixart PAC7302");
MODULE_LICENSE("GPL");
#include <linux/dmi.h>
MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver");
MODULE_LICENSE("GPL");
intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
if (intf->num_altsetting != 9) {
- pr_warn("sn9c20x camera with unknown number of alt "
- "settings (%d), please report!\n",
+ pr_warn("sn9c20x camera with unknown number of alt settings (%d), please report!\n",
intf->num_altsetting);
gspca_dev->alt = intf->num_altsetting;
return 0;
#include <linux/slab.h>
#include "gspca.h"
MODULE_DESCRIPTION("GSPCA/SQ905 USB Camera Driver");
MODULE_LICENSE("GPL");
int ret;
PDEBUG(D_PROBE,
- "SQ9050 camera detected"
- " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
+ "SQ9050 camera detected (vid/pid 0x%04X:0x%04X)",
+ id->idVendor, id->idProduct);
ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0);
if (ret < 0) {
len -= 4;
if (len < chunk_len) {
- PERR("URB packet length is smaller"
- " than the specified chunk length");
+ PERR("URB packet length is smaller than the specified chunk length");
gspca_dev->last_packet_type = DISCARD_PACKET;
return;
}
sd->to_skip = gspca_dev->pixfmt.width * 4;
if (chunk_len)
- PERR("Chunk length is "
- "non-zero on a SOF");
+ PERR("Chunk length is non-zero on a SOF");
break;
case 0x8002:
NULL, 0);
if (chunk_len)
- PERR("Chunk length is "
- "non-zero on a EOF");
+ PERR("Chunk length is non-zero on a EOF");
break;
case 0x0005:
info[i] = gspca_dev->usb_buf[0];
}
PDEBUG(D_STREAM,
- "Read info: %d %d %d %d %d %d."
- " Should be 1,0,2,2,0,0",
+ "Read info: %d %d %d %d %d %d. Should be 1,0,2,2,0,0",
info[0], info[1], info[2],
info[3], info[4], info[5]);
}
#include "gspca.h"
MODULE_DESCRIPTION("Topro TP6800/6810 gspca webcam driver");
-MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Anders Blomdell <
[email protected]>");
MODULE_LICENSE("GPL");
static int force_sensor = -1;
#include "gspca.h"
#include "jpeg.h"
-MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Serge A. Suchkov <
[email protected]>");
MODULE_DESCRIPTION("GSPCA ZC03xx/VC3xx USB Camera Driver");
MODULE_LICENSE("GPL");
projects / openwrt / staging / blogic.git / commitdiff