spi: spi-mxs: Remove bogus setting of ssp clk rate field

The ssp struct has a clock rate field, to provide the actual value, in Hz,
of the SSP output clock (the rate of SSP_SCK) after mxs_ssp_set_clk_rate()
is called.  It is set by mxs_ssp_set_clk_rate(), for SSP using drivers (like
SPI and MMC) to *read* if they want to know the actual clock rate.  The SPI
driver isn't supposed to *write* to it.

For some reason the spi-mxs driver decides to write to this field on init,
and sets it to the value of the SSP input clock (clk_sspN, from the MXS
clocking block) in kHz.  It shouldn't be setting the value, and certainly
shouldn't be setting it with the wrong clock in the wrong units.

Signed-off-by: Trent Piepho <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index de7387ef25b8b01b02bae124416e4b39f9e51b56..8cb5d8b6f0420143c4efd4242e35383dcc73d041 100644 (file)
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -536,7 +536,6 @@ static int mxs_spi_probe(struct platform_device *pdev)
                goto out_dma_release;
 
        clk_set_rate(ssp->clk, clk_freq);
-       ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
 
        ret = stmp_reset_block(ssp->base);
        if (ret)