platform/x86: hp_accel: Add quirk for HP ProBook 440 G4

Added support for HP ProBook 440 G4 laptops by including the accelerometer
orientation quirk for that device. Testing was performed based on the
axis orientation guidelines here:
https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d
which states "If the left side is elevated, X increases (becomes positive)".

When tested, on lifting the left edge, x values became increasingly negative
thus indicating an inverted x-axis on the installed lis3lv02d chip.
This was compensated by adding an entry for this device in hp_accel.c
specifying the quirk as x_inverted. The patch was tested on a
ProBook 440 G4 device and x-axis as well as y and z-axis values are now
generated as per spec.

Signed-off-by: Osama Khan <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>

diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 493d8910a74e2eca10812c3202a74cdb21ed37cd..7b12abe86b94f3f71d1fc9cb85d5828554ee8cfb 100644 (file)
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -240,6 +240,7 @@ static const struct dmi_system_id lis3lv02d_dmi_ids[] = {
        AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
        AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left),
        AXIS_DMI_MATCH("HPB440G3", "HP ProBook 440 G3", x_inverted_usd),
+       AXIS_DMI_MATCH("HPB440G4", "HP ProBook 440 G4", x_inverted),
        AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
        AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
        AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),