+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-CONFIG_ARCH_BCM_53573=y
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_BCM_NSP=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1
-CONFIG_ARM_HAS_GROUP_RELOCS=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_SP805_WATCHDOG=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_B53=y
-CONFIG_B53_MDIO_DRIVER=y
-CONFIG_B53_SERDES=y
-CONFIG_B53_SRAB_DRIVER=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_FALLBACK_SPROM=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BCM_CYGNUS_PHY is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_NS_THERMAL=y
-CONFIG_BCM_SR_THERMAL=y
-CONFIG_BGMAC=y
-CONFIG_BGMAC_BCMA=y
-CONFIG_BGMAC_PLATFORM=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-# CONFIG_CLK_BCM_NS2 is not set
-CONFIG_CLK_BCM_NSP=y
-# CONFIG_CLK_BCM_SR is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_IPROC=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONTEXT_TRACKING=y
-CONFIG_CONTEXT_TRACKING_IDLE=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_GF128MUL=y
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MISC=y
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_USER=y
-CONFIG_DMA_OPS=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_EXTCON=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FUNCTION_ALIGNMENT=0
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_BCM_XGS_IPROC=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GRO_CELLS=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM2835=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BCM_IPROC=y
-# CONFIG_I2C_SLAVE_TESTUNIT is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQSTACKS=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KMAP_LOCAL=y
-CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
-# CONFIG_LEDS_BCM63138 is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_IPROC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMU_LAZY_TLB_REFCOUNT=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_BRCMNAND_IPROC=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
-CONFIG_MTD_PARSER_TPLINK_SAFELOADER=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SRCU_NMI_SAFE=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_QCA8K=y
-CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_DSA_TAG_NONE=y
-CONFIG_NET_DSA_TAG_QCA=y
-CONFIG_NET_EGRESS=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_INGRESS=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_XGRESS=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_NVMEM_BRCM_NVRAM=y
-CONFIG_NVMEM_LAYOUTS=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-CONFIG_PCI=y
-CONFIG_PCIE_IPROC=y
-CONFIG_PCIE_IPROC_BCMA=y
-# CONFIG_PCIE_IPROC_PLATFORM is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_BCM_NS_USB2 is not set
-# CONFIG_PHY_BCM_NS_USB3 is not set
-# CONFIG_PHY_BCM_SR_PCIE is not set
-CONFIG_PHY_BCM_SR_USB=y
-# CONFIG_PHY_BRCM_SATA is not set
-# CONFIG_PHY_NS2_USB_DRD is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IPROC_GPIO=y
-CONFIG_PINCTRL_NS=y
-# CONFIG_PINCTRL_NS2_MUX is not set
-CONFIG_PINCTRL_NSP_GPIO=y
-CONFIG_PINCTRL_NSP_MUX=y
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_PWM=y
-CONFIG_PWM_BCM_IPROC=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM_QSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMMON=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
+++ /dev/null
-From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001
-Date: Fri, 1 Sep 2023 12:55:49 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Specify NVRAM access and use its "et2macaddr" NVMEM cell.
-
----
- .../dts/broadcom/bcm47094-dlink-dir-885l.dts | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
-@@ -25,6 +25,15 @@
- <0x88000000 0x08000000>;
- };
-
-+ nvram@1e3f0000 {
-+ compatible = "brcm,nvram";
-+ reg = <0x1e3f0000 0x10000>;
-+
-+ et2macaddr: et2macaddr {
-+ #nvmem-cell-cells = <1>;
-+ };
-+ };
-+
- nand_controller: nand-controller@18028000 {
- nand@0 {
- partitions {
-@@ -112,6 +121,11 @@
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et2macaddr 0>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- status = "okay";
- };
-@@ -142,6 +156,8 @@
-
- port@4 {
- label = "wan";
-+ nvmem-cells = <&et2macaddr 3>;
-+ nvmem-cell-names = "mac-address";
- };
-
- port@5 {
+++ /dev/null
-From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001
-Date: Fri, 1 Sep 2023 14:43:11 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Specify NVRAM access and use its "et1macaddr" NVMEM cell.
-
----
- arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
-@@ -25,6 +25,12 @@
- <0x88000000 0x08000000>;
- };
-
-+ nvram@1c080000 {
-+ et1macaddr: et1macaddr {
-+ #nvmem-cell-cells = <1>;
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
-@@ -62,6 +68,11 @@
- };
- };
-
-+&gmac0 {
-+ nvmem-cells = <&et1macaddr 0>;
-+ nvmem-cell-names = "mac-address";
-+};
-+
- &usb3_phy {
- status = "okay";
- };
+++ /dev/null
-From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001
-Date: Sat, 16 Sep 2023 10:30:57 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Felix to the bcm-ns.dtsi which uses dual licensing.
-That syncs more Northstar code to be based on the same licensing schema.
-
-This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add
-profiling support").
-
----
- arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 7 +++++++
- arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 -------
- 2 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
-@@ -14,6 +14,13 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-+ pmu {
-+ compatible = "arm,cortex-a9-pmu";
-+ interrupts =
-+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
- chipcommon-a-bus@18000000 {
- compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x00001000>;
---- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
-@@ -26,13 +26,6 @@
- };
- };
-
-- pmu {
-- compatible = "arm,cortex-a9-pmu";
-- interrupts =
-- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
+++ /dev/null
-From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001
-Date: Sat, 16 Sep 2023 10:58:55 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing.
-That syncs more Northstar code to be based on the same licensing schema.
-
-This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X:
-Make USB 3.0 PHY use MDIO PHY driver").
-
----
- arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 27 ++++++++++++++++++++++++
- arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------
- 2 files changed, 27 insertions(+), 27 deletions(-)
-
---- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
-@@ -327,6 +327,29 @@
- #address-cells = <1>;
- };
-
-+ mdio-mux@18003000 {
-+ compatible = "mdio-mux-mmioreg", "mdio-mux";
-+ mdio-parent-bus = <&mdio>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x18003000 0x4>;
-+ mux-mask = <0x200>;
-+
-+ mdio@0 {
-+ reg = <0x0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ usb3_phy: usb3-phy@10 {
-+ compatible = "brcm,ns-ax-usb3-phy";
-+ reg = <0x10>;
-+ usb3-dmp-syscon = <&usb3_dmp>;
-+ #phy-cells = <0>;
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
- rng: rng@18004000 {
- compatible = "brcm,bcm5301x-rng";
- reg = <0x18004000 0x14>;
-@@ -467,6 +490,10 @@
- brcm,nand-has-wp;
- };
-
-+ usb3_dmp: syscon@18105000 {
-+ reg = <0x18105000 0x1000>;
-+ };
-+
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
---- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
-@@ -62,33 +62,6 @@
- };
- };
-
-- mdio-mux@18003000 {
-- compatible = "mdio-mux-mmioreg", "mdio-mux";
-- mdio-parent-bus = <&mdio>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- reg = <0x18003000 0x4>;
-- mux-mask = <0x200>;
--
-- mdio@0 {
-- reg = <0x0>;
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- usb3_phy: usb3-phy@10 {
-- compatible = "brcm,ns-ax-usb3-phy";
-- reg = <0x10>;
-- usb3-dmp-syscon = <&usb3_dmp>;
-- #phy-cells = <0>;
-- status = "disabled";
-- };
-- };
-- };
--
-- usb3_dmp: syscon@18105000 {
-- reg = <0x18105000 0x1000>;
-- };
--
- i2c0: i2c@18009000 {
- compatible = "brcm,iproc-i2c";
- reg = <0x18009000 0x50>;
+++ /dev/null
-From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001
-Date: Fri, 13 Oct 2023 12:33:13 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU
- ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When redescribing ports I assumed that missing "label" (like "cpu")
-means switch port isn't used. That was incorrect and I realized my
-change made Linux always use the first (5) CPU port (there are 3 of
-them).
-
-While above should technically be possible it often isn't correct:
-1. Non-default switch ports are often connected to Ethernet interfaces
- not fully covered by vendor setup (they may miss MACs)
-2. On some devices non-default ports require specifying fixed link
-
-This fixes network connectivity for some devices. It was reported &
-tested for Netgear R8000. It also affects Linksys EA9200 with its
-downstream DTS.
-
-Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
----
- .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts | 8 ++++++++
- .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm953012er.dts | 8 ++++++++
- 20 files changed, 160 insertions(+)
-
---- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -189,5 +189,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
-@@ -93,5 +93,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
-@@ -96,5 +96,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
-@@ -130,5 +130,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
-@@ -153,6 +153,14 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -153,5 +153,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
-@@ -89,5 +89,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
-@@ -156,5 +156,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
-@@ -235,6 +235,14 @@
- status = "disabled";
- };
-
-+ port@5 {
-+ status = "disabled";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
- port@8 {
- label = "cpu";
- };
---- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
-@@ -168,6 +168,14 @@
- status = "disabled";
- };
-
-+ port@5 {
-+ status = "disabled";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
- port@8 {
- label = "cpu";
- };
---- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
-@@ -200,6 +200,14 @@
- status = "disabled";
- };
-
-+ port@5 {
-+ status = "disabled";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
- port@8 {
- label = "cpu";
- phy-mode = "rgmii";
---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
-@@ -115,5 +115,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
-@@ -128,5 +128,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
-@@ -115,5 +115,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
-@@ -83,5 +83,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
-@@ -155,5 +155,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
-@@ -166,5 +166,13 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
-@@ -132,6 +132,14 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
-@@ -193,6 +193,14 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/broadcom/bcm953012er.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm953012er.dts
-@@ -92,6 +92,14 @@
- port@8 {
- status = "disabled";
- };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
- };
- };
-
+++ /dev/null
-From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001
-Date: Fri, 13 Oct 2023 12:33:14 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000
- CPU ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Ports 5 and 7 are disabled by default because the standard use case is
-for port 8 to manage all CPU directed traffic. For experimentation
-purposes however it is desirable to provide adequate properties such
-that people can experiment with using different ports without having to
-figure out their configuration. Some of the use cases include but are
-not limited to doubling or tripling the bandwidth by leveraging the
-additional ports/Ethernet MAC combinations.
-
----
- arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
-@@ -237,10 +237,20 @@
-
- port@5 {
- status = "disabled";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
- };
-
- port@7 {
- status = "disabled";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
- };
-
- port@8 {
+++ /dev/null
-From 253358f373492608348136e569366d73cb969f6a Mon Sep 17 00:00:00 2001
-Date: Tue, 24 Oct 2023 09:26:05 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch was developed as OpenWrt downstream change and was recently
-confirmed to work as expected.
-
----
- .../dts/broadcom/bcm4709-linksys-ea9200.dts | 38 +++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
-@@ -47,3 +47,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "lan4";
-+ };
-+
-+ port@4 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ status = "disabled";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ label = "cpu";
-+ };
-+ };
-+};
+++ /dev/null
-From ed0d78c75ca93c9f1d7f0d08ac5abe0de71fe312 Mon Sep 17 00:00:00 2001
-Date: Thu, 16 May 2024 10:47:37 +0200
-Subject: [PATCH] ARM: dts: broadcom: convert NVMEM content to layout syntax
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use cleaner (and non-deprecated) bindings syntax. See commit
-bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for
-details.
-
----
- arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 12 ++++++++----
- .../dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 12 ++++++++----
- 2 files changed, 16 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
-@@ -223,11 +223,15 @@
- reg = <0x50>;
- pagesize = <32>;
- read-only;
-- #address-cells = <1>;
-- #size-cells = <1>;
-
-- mac_address: mac-address@66 {
-- reg = <0x66 0x6>;
-+ nvmem-layout {
-+ compatible = "fixed-layout";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ mac_address: mac-address@66 {
-+ reg = <0x66 0x6>;
-+ };
- };
- };
- };
---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
-@@ -55,11 +55,15 @@
- reg = <0x50>;
- pagesize = <32>;
- read-only;
-- #address-cells = <1>;
-- #size-cells = <1>;
-
-- mac_address: mac-address@66 {
-- reg = <0x66 0x6>;
-+ nvmem-layout {
-+ compatible = "fixed-layout";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ mac_address: mac-address@66 {
-+ reg = <0x66 0x6>;
-+ };
- };
- };
- };
+++ /dev/null
-From ad1915e2070cf832bfb81dcbeb44b073c09e6dcc Mon Sep 17 00:00:00 2001
-Date: Sun, 20 Oct 2024 18:51:47 -0700
-Subject: [PATCH] ARM: dts: meraki-mr26: set mac address for gmac0
-
-Currently this needs to be done in userspace.
-
----
- .../dts/broadcom/bcm53015-meraki-mr26.dts | 20 +++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
-@@ -59,6 +59,9 @@
-
- &gmac0 {
- status = "okay";
-+
-+ nvmem-cells = <&macaddr_board_config_66>;
-+ nvmem-cell-names = "mac-address";
- };
-
- &gmac1 {
-@@ -102,8 +105,25 @@
- };
-
- partition@800000 {
-+ compatible = "linux,ubi";
- label = "ubi";
- reg = <0x800000 0x7780000>;
-+
-+ volumes {
-+ ubi-volume-board-config {
-+ volname = "board-config";
-+
-+ nvmem-layout {
-+ compatible = "fixed-layout";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ macaddr_board_config_66: macaddr@66 {
-+ reg = <0x66 0x6>;
-+ };
-+ };
-+ };
-+ };
- };
- };
- };
+++ /dev/null
-From c18e0b14b466fb0aa17c8ca6e61f16ba1254aebd Mon Sep 17 00:00:00 2001
-Date: Sun, 24 Nov 2024 12:58:51 -0800
-Subject: [PATCH] ARM: dts: meraki-mr26: wifi MACs in dts
-
-OPENWRT HACK. Probably will not be accepted upstream.
-
----
- .../dts/broadcom/bcm53015-meraki-mr26.dts | 31 ++++++++++++++++++-
- 1 file changed, 30 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
-@@ -60,7 +60,7 @@
- &gmac0 {
- status = "okay";
-
-- nvmem-cells = <&macaddr_board_config_66>;
-+ nvmem-cells = <&macaddr_board_config_66 0>;
- nvmem-cell-names = "mac-address";
- };
-
-@@ -74,6 +74,33 @@
- status = "disabled";
- };
-
-+&pcie0 {
-+ wifi@0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ compatible = "brcm,bcm43431";
-+ nvmem-cells = <&macaddr_board_config_66 1>;
-+ nvmem-cell-names = "mac-address";
-+ };
-+};
-+
-+&pcie1 {
-+ wifi@0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ compatible = "brcm,bcm43431";
-+ nvmem-cells = <&macaddr_board_config_66 2>;
-+ nvmem-cell-names = "mac-address";
-+ };
-+};
-+
-+&pcie2 {
-+ wifi@0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ compatible = "brcm,bcm43428";
-+ nvmem-cells = <&macaddr_board_config_66 3>;
-+ nvmem-cell-names = "mac-address";
-+ };
-+};
-+
- &nandcs {
- partitions {
- compatible = "fixed-partitions";
-@@ -119,7 +146,9 @@
- #size-cells = <1>;
-
- macaddr_board_config_66: macaddr@66 {
-+ compatible = "mac-base";
- reg = <0x66 0x6>;
-+ #nvmem-cell-cells = <1>;
- };
- };
- };
+++ /dev/null
-Date: Tue, 13 Apr 2021 18:25:20 +0200
-Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Parsing every partition with "compatible" set to "brcm,trx" results in
-parsing both: firmware partition and failsafe partition on devices that
-implement failsafe booting. This affects e.g. Linksys EA9500 which has:
-
-partition@200000 {
- reg = <0x0200000 0x01d00000>;
- compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-partition@1f00000 {
- reg = <0x01f00000 0x01d00000>;
- compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-Check for MTD partition name "firmware" before parsing. Recently added
-ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on
-bootloader setup.
-
----
- drivers/mtd/parsers/parser_trx.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -92,6 +92,10 @@ static int parser_trx_parse(struct mtd_i
- if (err != 0 && err != -EINVAL)
- pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err);
-
-+ /* Don't parse any failsafe / backup partitions */
-+ if (strcmp(mtd->name, "firmware"))
-+ return -ENOENT;
-+
- parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),
- GFP_KERNEL);
- if (!parts)
+++ /dev/null
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c | 6 +++++
- drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h | 1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -77,8 +77,13 @@ static int xhci_priv_resume_quirk(struct
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
- struct xhci_plat_priv *priv = xhci_to_priv(xhci);
-+ struct platform_device *pdev = to_platform_device(dev);
-+ struct device_node *node = pdev->dev.of_node;
-
- xhci->quirks |= priv->quirks;
-+
-+ if (node && of_machine_is_compatible("brcm,bcm4708"))
-+ xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
-
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -163,6 +163,49 @@ int xhci_start(struct xhci_hcd *xhci)
- return ret;
- }
-
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+ u32 temp;
-+
-+ /* Alloc a virt device for that slot */
-+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* Ring fake doorbell for slot_id ep 0 */
-+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+ usleep_range(1000, 1500);
-+
-+ /* Read the status to check if HSE is set or not */
-+ temp = readl(&xhci->op_regs->status);
-+
-+ /* Clear HSE if set */
-+ if (temp & STS_FATAL) {
-+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+ temp &= ~0x1fff;
-+ temp |= STS_FATAL;
-+ writel(temp, &xhci->op_regs->status);
-+ usleep_range(1000, 1500);
-+ readl(&xhci->op_regs->status);
-+ }
-+
-+ /* Free virt device */
-+ xhci_free_virt_device(xhci, xhci->devs[slot_id], slot_id);
-+
-+ /* We're done if controller is already running */
-+ if (readl(&xhci->op_regs->command) & CMD_RUN)
-+ return 0;
-+
-+ return xhci_start(xhci);
-+}
-+
- /*
- * Reset a halted HC.
- *
-@@ -500,6 +543,15 @@ static int xhci_run_finished(struct xhci
- return -ENODEV;
- }
-
-+ if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+ int err = xhci_fake_doorbell(xhci, 1);
-+ if (err) {
-+ xhci_halt(xhci);
-+ spin_unlock_irqrestore(&xhci->lock, flags);
-+ return err;
-+ }
-+ }
-+
- xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
- if (xhci->quirks & XHCI_NEC_HOST)
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1660,6 +1660,7 @@ struct xhci_hcd {
- #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48)
- #define XHCI_ETRON_HOST BIT_ULL(49)
- #define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50)
-+#define XHCI_FAKE_DOORBELL BIT_ULL(51)
-
- unsigned int num_active_eps;
- unsigned int limit_active_eps;
+++ /dev/null
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M (1 << 0) /* MMU enable */
-#define CR_C (1 << 2) /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -36,6 +36,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS += ll_char_wr.o font.o
- endif
-
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS += head-bcm_5301x-mpcore.o
-+OBJS += cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS += head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks. This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+ .section ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+ @ Preserve r8/r7 i.e. kernel entry values
-+ mov r12, r8
-+
-+ @ Clear MMU enable and Dcache enable bits
-+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
-+ bic r0, #CR_C|CR_M
-+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
-+ nop
-+
-+ @ Call the cache invalidation routine
-+ bl v7_flush_dcache_all
-+ nop
-+ mov r0,#0
-+ ldr r3, =0x19022000 @ L2 cache controller, control reg
-+ str r0, [r3, #0x100] @ Disable L2 cache
-+ nop
-+
-+ @ Restore
-+ mov r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
-
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
-
- __INIT
-
-@@ -63,7 +64,7 @@ loop2:
- ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11
- THUMB( lsl r6, r9, r2 )
- THUMB( orr r11, r11, r6 ) @ factor index number into r11
-- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
-+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way
- subs r9, r9, #1 @ decrement the index
- bge loop2
- subs r4, r4, #1 @ decrement the way
---- a/arch/arm/boot/compressed/vmlinux.lds.S
-+++ b/arch/arm/boot/compressed/vmlinux.lds.S
-@@ -41,6 +41,7 @@ SECTIONS
- *(.start)
- *(.text)
- *(.text.*)
-+ *(.init.text)
- ARM_STUBS_TEXT
- }
- .table : ALIGN(4) {
+++ /dev/null
-Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for remaining
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
----
-
---- a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
-@@ -92,3 +92,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "lan4";
-+ };
-+
-+ port@4 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
-@@ -83,3 +83,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ label = "lan4";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -149,3 +149,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "lan4";
-+ };
-+
-+ port@4 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
-@@ -46,3 +46,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "lan4";
-+ };
-+
-+ port@4 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
-@@ -43,3 +43,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "lan4";
-+ };
-+
-+ port@4 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
-@@ -86,3 +86,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "lan4";
-+ };
-+
-+ port@4 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
-@@ -77,3 +77,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ label = "lan4";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
-@@ -77,6 +77,40 @@
- status = "okay";
- };
-
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan3";
-+ };
-+
-+ port@5 {
-+ status = "disabled";
-+ };
-+
-+ port@7 {
-+ label = "cpu";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
- &nandcs {
- partitions {
- compatible = "fixed-partitions";
---- a/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -130,3 +130,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "lan4";
-+ };
-+
-+ port@4 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
-@@ -104,3 +104,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ label = "lan4";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
-@@ -94,3 +94,41 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ label = "lan4";
-+ };
-+
-+ port@5 {
-+ status = "disabled";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ label = "cpu";
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
-@@ -38,6 +38,40 @@
- status = "okay";
- };
-
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
- &nandcs {
- partitions {
- compatible = "fixed-partitions";
---- a/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
-@@ -91,6 +91,44 @@
- };
- };
-
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ label = "lan4";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
- &spi_nor {
- status = "okay";
-
---- a/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
-@@ -100,6 +100,44 @@
- vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
-
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ label = "lan4";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
- &spi_nor {
- status = "okay";
-
---- a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
-@@ -107,3 +107,42 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ port@0 {
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ label = "lan2";
-+ };
-+
-+ port@2 {
-+ label = "lan3";
-+ };
-+
-+ port@3 {
-+ label = "lan4";
-+ };
-+
-+ port@4 {
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ label = "cpu";
-+ };
-+
-+ port@7 {
-+ status = "disabled";
-+ };
-+
-+ port@8 {
-+ status = "disabled";
-+ };
-+ };
-+};
-+
+++ /dev/null
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
----
-
---- a/arch/arm/boot/dts/broadcom/Makefile
-+++ b/arch/arm/boot/dts/broadcom/Makefile
-@@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-linksys-ea9200.dtb \
- bcm4709-netgear-r7000.dtb \
-+ bcm4709-netgear-r7900.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-asus-rt-ac3100.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Netgear R7900";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ axi@18000000 {
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
+++ /dev/null
-From 35bba88e75311242841dde83073c211310ec0259 Mon Sep 17 00:00:00 2001
-Date: Wed, 4 May 2022 08:07:06 +0100
-Subject: [PATCH] bcm53xx: partition fixups for Meraki MX64/MX65
-
-We need to enlarge the u-boot partition to add extra features like UBI
-booting. The shmoo and newly created env partitions can easily be moved
-to the nvram partition. This fixup allows u-boot to be enlarged to up to
-1MiB.
-
----
- arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 20 ++++++++++++--------
- 1 file changed, 12 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
-@@ -84,13 +84,7 @@
-
- partition@0 {
- label = "u-boot";
-- reg = <0x0 0x80000>;
-- read-only;
-- };
--
-- partition@80000 {
-- label = "shmoo";
-- reg = <0x80000 0x80000>;
-+ reg = <0x0 0x100000>;
- read-only;
- };
-
-@@ -101,7 +95,18 @@
-
- partition@400000 {
- label = "nvram";
-- reg = <0x400000 0x100000>;
-+ reg = <0x400000 0x40000>;
-+ };
-+
-+ partition@440000 {
-+ label = "u-boot-env";
-+ reg = <0x440000 0x40000>;
-+ };
-+
-+ partition@480000 {
-+ label = "shmoo";
-+ reg = <0x480000 0x80000>;
-+ read-only;
- };
-
- partition@500000 {
+++ /dev/null
-From 9f4e68261b89df87457f46999c471d11754b5de2 Mon Sep 17 00:00:00 2001
-Date: Sun, 6 Oct 2024 15:57:44 +0200
-Subject: [PATCH] bcm53xx: dts: meraki-mx6x: add OpenWrt-specific LED aliases
-
-Assign green power LED for "boot", "running", orange for "upgrade" and
-red for "failsafe" functions - the same as done for MR33 and MR74.
-
----
- arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi | 9 ++++++++-
- arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi | 8 +++++++-
- .../boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 4 ++--
- 3 files changed, 17 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
-@@ -8,6 +8,13 @@
- #include "bcm958625-meraki-mx6x-common.dtsi"
-
- / {
-+ aliases {
-+ led-boot = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_fault;
-+ led-failsafe = &led_failsafe;
-+ };
-+
- keys {
- compatible = "gpio-keys-polled";
- autorepeat;
-@@ -55,7 +62,7 @@
- gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
- };
-
-- led-4 {
-+ led_fault: led-4 {
- /* amber:power */
- function = LED_FUNCTION_FAULT;
- color = <LED_COLOR_ID_AMBER>;
---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
-@@ -8,6 +8,12 @@
- #include "bcm958625-meraki-mx6x-common.dtsi"
-
- / {
-+ aliases {
-+ led-boot = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_fault;
-+ led-failsafe = &led_failsafe;
-+ };
-
- keys {
- compatible = "gpio-keys-polled";
-@@ -104,7 +110,7 @@
- gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
- };
-
-- led-a {
-+ led_fault: led-a {
- /* amber:power */
- function = LED_FUNCTION_FAULT;
- color = <LED_COLOR_ID_AMBER>;
---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
-@@ -14,14 +14,14 @@
- pwm-leds {
- compatible = "pwm-leds";
-
-- led-1 {
-+ led_failsafe: led-1 {
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_RED>;
- pwms = <&pwm 1 50000>;
- max-brightness = <255>;
- };
-
-- led-2 {
-+ led_power: led-2 {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_GREEN>;
- pwms = <&pwm 2 50000>;
+++ /dev/null
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c | 4 ++++
- drivers/mtd/ubi/ubi.h | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi
- #define AV_ADD BIT(1)
- #define AV_FIND_OR_ADD (AV_FIND | AV_ADD)
-
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
- * find_or_add_av - internal function to find a volume, add a volume or do
- * both (find and add if missing).
-@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i
- if (!ai)
- return -ENOMEM;
-
-+ erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- /* On small flash devices we disable fastmap in any case. */
- if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -717,6 +717,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- }
-
- magic = be32_to_cpu(ec_hdr->magic);
-+ if (magic == 0xdeadc0de)
-+ erase_all_next = true;
-+ if (erase_all_next)
-+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- if (magic != UBI_EC_HDR_MAGIC) {
- if (mtd_is_eccerr(read_err))
- return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
-
- /* attach.c */
-+extern bool erase_all_next;
- struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
- int ec);
- void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);
+++ /dev/null
-Date: Mon, 20 Jun 2022 10:01:18 +0200
-Subject: [PATCH] net: disable GRO by default
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In many cases GRO improves network performance however it comes at a
-cost of chacksums calculations. In case of slow CPU and missing hardware
-csum calculation support GRO can actually decrease network speed.
-
-On BCM4708 *disabling* GRO results in following NAT masquarade speed
-changes:
-1. 364 Mb/s → 396 Mb/s (packet steering disabled)
-2. 341 Mb/s → 566 Mb/s (packet steering enabled)
-
----
- include/linux/netdev_features.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdev_features.h
-+++ b/include/linux/netdev_features.h
-@@ -243,10 +243,10 @@ static inline int find_next_netdev_featu
- #define NETIF_F_UPPER_DISABLES NETIF_F_LRO
-
- /* changeable features with no special hardware requirements */
--#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST)
-+#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO)
-
- /* Changeable features with no special hardware requirements that defaults to off. */
--#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD)
-+#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST)
-
- #define NETIF_F_VLAN_FEATURES (NETIF_F_HW_VLAN_CTAG_FILTER | \
- NETIF_F_HW_VLAN_CTAG_RX | \
+++ /dev/null
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
----
-
---- a/arch/arm/boot/dts/broadcom/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
-@@ -54,6 +54,7 @@
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&ilp>;
- };
-
- clocks {
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -331,14 +331,6 @@ static int bcma_register_devices(struct
- }
- #endif
-
--#ifdef CONFIG_BCMA_SFLASH
-- if (bus->drv_cc.sflash.present) {
-- err = platform_device_register(&bcma_sflash_dev);
-- if (err)
-- bcma_err(bus, "Error registering serial flash\n");
-- }
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- if (bus->drv_cc.nflash.present) {
- err = platform_device_register(&bcma_nflash_dev);
-@@ -418,6 +410,14 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_register_core(bus, core);
- }
-
-+#ifdef CONFIG_BCMA_SFLASH
-+ if (bus->drv_cc.sflash.present) {
-+ err = platform_device_register(&bcma_sflash_dev);
-+ if (err)
-+ bcma_err(bus, "Error registering serial flash\n");
-+ }
-+#endif
-+
- /* Try to get SPROM */
- err = bcma_sprom_get(bus);
- if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -14,6 +14,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/clocksource_ids.h>
-@@ -1048,6 +1049,16 @@ static void __init arch_timer_of_configu
- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- arch_timer_rate = rate;
-
-+ /* Get clk rate through clk driver if present */
-+ if (!arch_timer_rate) {
-+ struct clk *clk = of_clk_get(np, 0);
-+
-+ if (!IS_ERR(clk)) {
-+ if (!clk_prepare_enable(clk))
-+ arch_timer_rate = clk_get_rate(clk);
-+ }
-+ }
-+
- /* Check the timer frequency. */
- if (validate_timer_rate())
- pr_warn("frequency not available\n");
projects / openwrt / staging / stintel.git / commitdiff