rt2800usb: remove PWR_PIN_CFG=0x3 during init

This seems to be only needed as workaround for hardware problem on
PCI devices.

Acked-by: Helmut Schaa <[email protected]>
Acked-by: Ivo van Doorn <[email protected]>
Signed-off-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: John W. Linville <[email protected]>

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 425267af6106db996cb54bbf40fb694b8e8db255..f0074bcee7c9d780009c1e9a7e5ef2f9f451da97 100644 (file)
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -226,8 +226,6 @@ static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
        rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
        rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
 
-       rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-
        reg = 0;
        rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
        rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);