+++ /dev/null
-# Telegraf Configuration
-#
-# Telegraf is entirely plugin driven. All metrics are gathered from the
-# declared inputs, and sent to the declared outputs.
-#
-# Plugins must be declared in here to be active.
-# To deactivate a plugin, comment out the name and any variables.
-#
-# Use 'telegraf -config telegraf.conf -test' to see what metrics a config
-# file would generate.
-#
-# Environment variables can be used anywhere in this config file, simply surround
-# them with ${}. For strings the variable must be within quotes (ie, "${STR_VAR}"),
-# for numbers and booleans they should be plain (ie, ${INT_VAR}, ${BOOL_VAR})
-
-
-# Global tags can be specified here in key="value" format.
-[global_tags]
- # dc = "us-east-1" # will tag all metrics with dc=us-east-1
- # rack = "1a"
- ## Environment variables can be used as tags, and throughout the config file
- # user = "$USER"
-
-# Configuration for telegraf agent
-[agent]
- ## Default data collection interval for all inputs
- interval = "10s"
- ## Rounds collection interval to 'interval'
- ## ie, if interval="10s" then always collect on :00, :10, :20, etc.
- round_interval = true
-
- ## Telegraf will send metrics to outputs in batches of at most
- ## metric_batch_size metrics.
- ## This controls the size of writes that Telegraf sends to output plugins.
- metric_batch_size = 1000
-
- ## Maximum number of unwritten metrics per output. Increasing this value
- ## allows for longer periods of output downtime without dropping metrics at the
- ## cost of higher maximum memory usage.
- metric_buffer_limit = 10000
-
- ## Collection jitter is used to jitter the collection by a random amount.
- ## Each plugin will sleep for a random time within jitter before collecting.
- ## This can be used to avoid many plugins querying things like sysfs at the
- ## same time, which can have a measurable effect on the system.
- collection_jitter = "0s"
-
- ## Collection offset is used to shift the collection by the given amount.
- ## This can be be used to avoid many plugins querying constraint devices
- ## at the same time by manually scheduling them in time.
- # collection_offset = "0s"
-
- ## Default flushing interval for all outputs. Maximum flush_interval will be
- ## flush_interval + flush_jitter
- flush_interval = "10s"
- ## Jitter the flush interval by a random amount. This is primarily to avoid
- ## large write spikes for users running a large number of telegraf instances.
- ## ie, a jitter of 5s and interval 10s means flushes will happen every 10-15s
- flush_jitter = "0s"
-
- ## Collected metrics are rounded to the precision specified. Precision is
- ## specified as an interval with an integer + unit (e.g. 0s, 10ms, 2us, 4s).
- ## Valid time units are "ns", "us" (or "µs"), "ms", "s".
- ##
- ## By default or when set to "0s", precision will be set to the same
- ## timestamp order as the collection interval, with the maximum being 1s:
- ## ie, when interval = "10s", precision will be "1s"
- ## when interval = "250ms", precision will be "1ms"
- ##
- ## Precision will NOT be used for service inputs. It is up to each individual
- ## service input to set the timestamp at the appropriate precision.
- precision = "0s"
-
- ## Log at debug level.
- # debug = false
- ## Log only error level messages.
- # quiet = false
-
- ## Log format controls the way messages are logged and can be one of "text",
- ## "structured" or, on Windows, "eventlog".
- # logformat = "text"
-
- ## Message key for structured logs, to override the default of "msg".
- ## Ignored if `logformat` is not "structured".
- # structured_log_message_key = "message"
-
- ## Name of the file to be logged to or stderr if unset or empty. This
- ## setting is ignored for the "eventlog" format.
- # logfile = ""
-
- ## The logfile will be rotated after the time interval specified. When set
- ## to 0 no time based rotation is performed. Logs are rotated only when
- ## written to, if there is no log activity rotation may be delayed.
- # logfile_rotation_interval = "0h"
-
- ## The logfile will be rotated when it becomes larger than the specified
- ## size. When set to 0 no size based rotation is performed.
- # logfile_rotation_max_size = "0MB"
-
- ## Maximum number of rotated archives to keep, any older logs are deleted.
- ## If set to -1, no archives are removed.
- # logfile_rotation_max_archives = 5
-
- ## Pick a timezone to use when logging or type 'local' for local time.
- ## Example: America/Chicago
- # log_with_timezone = ""
-
- ## Override default hostname, if empty use os.Hostname()
- # hostname = ""
- ## If set to true, do no set the "host" tag in the telegraf agent.
- # omit_hostname = false
-
- ## Method of translating SNMP objects. Can be "netsnmp" (deprecated) which
- ## translates by calling external programs snmptranslate and snmptable,
- ## or "gosmi" which translates using the built-in gosmi library.
- # snmp_translator = "netsnmp"
-
- ## Name of the file to load the state of plugins from and store the state to.
- ## If uncommented and not empty, this file will be used to save the state of
- ## stateful plugins on termination of Telegraf. If the file exists on start,
- ## the state in the file will be restored for the plugins.
- # statefile = ""
-
- ## Flag to skip running processors after aggregators
- ## By default, processors are run a second time after aggregators. Changing
- ## this setting to true will skip the second run of processors.
- # skip_processors_after_aggregators = false
-
-###############################################################################
-# SECRETSTORE PLUGINS #
-###############################################################################
-
-
-# # Secret-store to access Docker Secrets
-# [[secretstores.docker]]
-# ## Unique identifier for the secretstore.
-# ## This id can later be used in plugins to reference the secrets
-# ## in this secret-store via @{<id>:<secret_key>} (mandatory)
-# id = "docker_secretstore"
-#
-# ## Default Path to directory where docker stores the secrets file
-# ## Current implementation in docker compose v2 only allows the following
-# ## value for the path where the secrets are mounted at runtime
-# # path = "/run/secrets"
-#
-# ## Allow dynamic secrets that are updated during runtime of telegraf
-# ## Dynamic Secrets work only with `file` or `external` configuration
-# ## in `secrets` section of the `docker-compose.yml` file
-# # dynamic = false
-
-
-# # Read secrets from a HTTP endpoint
-# [[secretstores.http]]
-# ## Unique identifier for the secret-store.
-# ## This id can later be used in plugins to reference the secrets
-# ## in this secret-store via @{<id>:<secret_key>} (mandatory)
-# id = "secretstore"
-#
-# ## URLs from which to read the secrets
-# url = "http://localhost/secrets"
-#
-# ## Optional HTTP headers
-# # headers = {"X-Special-Header" = "Special-Value"}
-#
-# ## Optional Token for Bearer Authentication via
-# ## "Authorization: Bearer <token>" header
-# # token = "your-token"
-#
-# ## Optional Credentials for HTTP Basic Authentication
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## OAuth2 Client Credentials. The options 'client_id', 'client_secret', and 'token_url' are required to use OAuth2.
-# # client_id = "clientid"
-# # client_secret = "secret"
-# # token_url = "https://indentityprovider/oauth2/v1/token"
-# # scopes = ["urn:opc:idm:__myscopes__"]
-#
-# ## HTTP Proxy support
-# # use_system_proxy = false
-# # http_proxy_url = ""
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Minimal TLS version to accept by the client
-# # tls_min_version = "TLS12"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Optional Cookie authentication
-# # cookie_auth_url = "https://localhost/authMe"
-# # cookie_auth_method = "POST"
-# # cookie_auth_username = "username"
-# # cookie_auth_password = "pa$$word"
-# # cookie_auth_headers = { Content-Type = "application/json", X-MY-HEADER = "hello" }
-# # cookie_auth_body = '{"username": "user", "password": "pa$$word", "authenticate": "me"}'
-# ## When unset or set to zero the authentication will only happen once
-# ## and will never renew the cookie. Set to a suitable duration if you
-# ## require cookie renewal!
-# # cookie_auth_renewal = "0s"
-#
-# ## Amount of time allowed to complete the HTTP request
-# # timeout = "5s"
-#
-# ## List of success status codes
-# # success_status_codes = [200]
-#
-# ## JSONata expression to transform the server response into a
-# ## { "secret name": "secret value", ... }
-# ## form. See https://jsonata.org for more information and a playground.
-# # transformation = ''
-#
-# ## Cipher used to decrypt the secrets.
-# ## In case your secrets are transmitted in an encrypted form, you need
-# ## to specify the cipher used and provide the corresponding configuration.
-# ## Please refer to https://github.com/influxdata/telegraf/blob/master/plugins/secretstores/http/README.md
-# ## for supported values.
-# # cipher = "none"
-#
-# ## AES cipher parameters
-# # [secretstores.http.aes]
-# # ## Key (hex-encoded) and initialization-vector (IV) for the decryption.
-# # ## In case the key (and IV) is derived from a password, the values can
-# # ## be omitted.
-# # key = ""
-# # init_vector = ""
-# #
-# # ## Parameters for password-based-key derivation.
-# # ## These parameters must match the encryption side to derive the same
-# # ## key on both sides!
-# # # kdf_algorithm = "PBKDF2-HMAC-SHA256"
-# # # password = ""
-# # # salt = ""
-# # # iterations = 0
-
-
-# # File based Javascript Object Signing and Encryption based secret-store
-# [[secretstores.jose]]
-# ## Unique identifier for the secret-store.
-# ## This id can later be used in plugins to reference the secrets
-# ## in this secret-store via @{<id>:<secret_key>} (mandatory)
-# id = "secretstore"
-#
-# ## Directory for storing the secrets
-# path = "/etc/telegraf/secrets"
-#
-# ## Password to access the secrets.
-# ## If no password is specified here, Telegraf will prompt for it at startup time.
-# # password = ""
-
-
-# # Secret-store to retrieve and maintain tokens from various OAuth2 services
-# [[secretstores.oauth2]]
-# ## Unique identifier for the secret-store.
-# ## This id can later be used in plugins to reference the secrets
-# ## in this secret-store via @{<id>:<secret_key>} (mandatory)
-# id = "secretstore"
-#
-# ## Service to retrieve the token(s) from
-# ## Currently supported services are "custom", "auth0" and "AzureAD"
-# # service = "custom"
-#
-# ## Setting to overwrite the queried token-endpoint
-# ## This setting is optional for some services but mandatory for others such
-# ## as "custom" or "auth0". Please check the documentation at
-# ## https://github.com/influxdata/telegraf/blob/master/plugins/secretstores/oauth2/README.md
-# # token_endpoint = ""
-#
-# ## Tenant ID for the AzureAD service
-# # tenant_id = ""
-#
-# ## Minimal remaining time until the token expires
-# ## If a token expires less than the set duration in the future, the token is
-# ## renewed. This is useful to avoid race-condition issues where a token is
-# ## still valid, but isn't when the request reaches the API endpoint of
-# ## your service using the token.
-# # token_expiry_margin = "1s"
-#
-# ## Section for defining a token secret
-# [[secretstores.oauth2.token]]
-# ## Unique secret-key used for referencing the token via @{<id>:<secret_key>}
-# key = ""
-# ## Client-ID and secret for the 2-legged OAuth flow
-# client_id = ""
-# client_secret = ""
-# ## Scopes to send in the request
-# # scopes = []
-#
-# ## Additional (optional) parameters to include in the token request
-# ## This might for example include the "audience" parameter required for
-# ## auth0.
-# # [secretstores.oauth2.token.parameters]
-# # audience = ""
-
-
-# # Operating System native secret-store
-# [[secretstores.os]]
-# ## Unique identifier for the secret-store.
-# ## This id can later be used in plugins to reference the secrets
-# ## in this secret-store via @{<id>:<secret_key>} (mandatory)
-# id = "secretstore"
-#
-# ## Keyring Name & Collection
-# ## * Linux: keyring name used for the secrets, collection is unused
-# ## * macOS: keyring specifies the macOS' Keychain name and collection is an
-# ## optional Keychain service name
-# ## * Windows: keys follow a fixed pattern in the form
-# ## `<collection>:<keyring>:<key_name>`. Please keep this in mind when
-# ## creating secrets with the Windows credential tool.
-# # keyring = "telegraf"
-# # collection = ""
-#
-# ## macOS Keychain password
-# ## If no password is specified here, Telegraf will prompt for it at startup
-# ## time.
-# # password = ""
-#
-# ## Allow dynamic secrets that are updated during runtime of telegraf
-# # dynamic = false
-
-
-# # Secret-store to access systemd secrets
-# [[secretstores.systemd]]
-# ## Unique identifier for the secretstore.
-# ## This id can later be used in plugins to reference the secrets
-# ## in this secret-store via @{<id>:<secret_key>} (mandatory)
-# id = "systemd"
-#
-# ## Path to systemd credentials directory
-# ## This should not be required as systemd indicates this directory
-# ## via the CREDENTIALS_DIRECTORY environment variable.
-# # path = "${CREDENTIALS_DIRECTORY}"
-#
-# ## Prefix to remove from systemd credential-filenames to derive secret names
-# # prefix = "telegraf."
-#
-
-
-###############################################################################
-# OUTPUT PLUGINS #
-###############################################################################
-
-
-# # Configuration for sending metrics to InfluxDB 2.0
-# [[outputs.influxdb_v2]]
-# ## The URLs of the InfluxDB cluster nodes.
-# ##
-# ## Multiple URLs can be specified for a single cluster, only ONE of the
-# ## urls will be written to each interval.
-# ## ex: urls = ["https://us-west-2-1.aws.cloud2.influxdata.com"]
-# urls = ["http://127.0.0.1:8086"]
-#
-# ## Local address to bind when connecting to the server
-# ## If empty or not set, the local address is automatically chosen.
-# # local_address = ""
-#
-# ## Token for authentication.
-# token = ""
-#
-# ## Organization is the name of the organization you wish to write to.
-# organization = ""
-#
-# ## Destination bucket to write into.
-# bucket = ""
-#
-# ## The value of this tag will be used to determine the bucket. If this
-# ## tag is not set the 'bucket' option is used as the default.
-# # bucket_tag = ""
-#
-# ## If true, the bucket tag will not be added to the metric.
-# # exclude_bucket_tag = false
-#
-# ## Timeout for HTTP messages.
-# # timeout = "5s"
-#
-# ## Additional HTTP headers
-# # http_headers = {"X-Special-Header" = "Special-Value"}
-#
-# ## HTTP Proxy override, if unset values the standard proxy environment
-# ## variables are consulted to determine which proxy, if any, should be used.
-# # http_proxy = "http://corporate.proxy:3128"
-#
-# ## HTTP User-Agent
-# # user_agent = "telegraf"
-#
-# ## Content-Encoding for write request body, can be set to "gzip" to
-# ## compress body or "identity" to apply no encoding.
-# # content_encoding = "gzip"
-#
-# ## Enable or disable uint support for writing uints influxdb 2.0.
-# # influx_uint_support = false
-#
-# ## When true, Telegraf will omit the timestamp on data to allow InfluxDB
-# ## to set the timestamp of the data during ingestion. This is generally NOT
-# ## what you want as it can lead to data points captured at different times
-# ## getting omitted due to similar data.
-# # influx_omit_timestamp = false
-#
-# ## HTTP/2 Timeouts
-# ## The following values control the HTTP/2 client's timeouts. These settings
-# ## are generally not required unless a user is seeing issues with client
-# ## disconnects. If a user does see issues, then it is suggested to set these
-# ## values to "15s" for ping timeout and "30s" for read idle timeout and
-# ## retry.
-# ##
-# ## Note that the timer for read_idle_timeout begins at the end of the last
-# ## successful write and not at the beginning of the next write.
-# # ping_timeout = "0s"
-# # read_idle_timeout = "0s"
-#
-# ## Optional TLS Config for use on HTTP connections.
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Rate limits for sending data (disabled by default)
-# ## Available, uncompressed payload size e.g. "5MB"
-# # rate_limit = "unlimited"
-# ## Fixed time-window for the available payload size e.g. "5m"
-# # rate_limit_period = "0s"
-#
-# ## Number of concurrent writes to the output
-# ## When set to one sequential sending is used (default).
-# ## NOTE: When using two or more concurrent writes the sending order of
-# ## metrics is not guaranteed!
-# # concurrent_writes = 1
-
-
-# # Configuration for Amon Server to send metrics to.
-# [[outputs.amon]]
-# ## Amon Server Key
-# server_key = "my-server-key" # required.
-#
-# ## Amon Instance URL
-# amon_instance = "https://youramoninstance" # required
-#
-# ## Connection timeout.
-# # timeout = "5s"
-
-
-# # Publishes metrics to an AMQP broker
-# [[outputs.amqp]]
-# ## Brokers to publish to. If multiple brokers are specified a random broker
-# ## will be selected anytime a connection is established. This can be
-# ## helpful for load balancing when not using a dedicated load balancer.
-# brokers = ["amqp://localhost:5672/influxdb"]
-#
-# ## Maximum messages to send over a connection. Once this is reached, the
-# ## connection is closed and a new connection is made. This can be helpful for
-# ## load balancing when not using a dedicated load balancer.
-# # max_messages = 0
-#
-# ## Exchange to declare and publish to.
-# exchange = "telegraf"
-#
-# ## Exchange type; common types are "direct", "fanout", "topic", "header", "x-consistent-hash".
-# # exchange_type = "topic"
-#
-# ## If true, exchange will be passively declared.
-# # exchange_passive = false
-#
-# ## Exchange durability can be either "transient" or "durable".
-# # exchange_durability = "durable"
-#
-# ## Additional exchange arguments.
-# # exchange_arguments = { }
-# # exchange_arguments = {"hash_property" = "timestamp"}
-#
-# ## Authentication credentials for the PLAIN auth_method.
-# # username = ""
-# # password = ""
-#
-# ## Auth method. PLAIN and EXTERNAL are supported
-# ## Using EXTERNAL requires enabling the rabbitmq_auth_mechanism_ssl plugin as
-# ## described here: https://www.rabbitmq.com/plugins.html
-# # auth_method = "PLAIN"
-#
-# ## Metric tag to use as a routing key.
-# ## ie, if this tag exists, its value will be used as the routing key
-# # routing_tag = "host"
-#
-# ## Static routing key. Used when no routing_tag is set or as a fallback
-# ## when the tag specified in routing tag is not found.
-# # routing_key = ""
-# # routing_key = "telegraf"
-#
-# ## Delivery Mode controls if a published message is persistent.
-# ## One of "transient" or "persistent".
-# # delivery_mode = "transient"
-#
-# ## Static headers added to each published message.
-# # headers = { }
-# # headers = {"database" = "telegraf", "retention_policy" = "default"}
-#
-# ## Connection timeout. If not provided, will default to 5s. 0s means no
-# ## timeout (not recommended).
-# # timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Optional Proxy Configuration
-# # use_proxy = false
-# # proxy_url = "localhost:8888"
-#
-# ## If true use batch serialization format instead of line based delimiting.
-# ## Only applies to data formats which are not line based such as JSON.
-# ## Recommended to set to true.
-# # use_batch_format = false
-#
-# ## Content encoding for message payloads, can be set to "gzip" to or
-# ## "identity" to apply no encoding.
-# ##
-# ## Please note that when use_batch_format = false each amqp message contains only
-# ## a single metric, it is recommended to use compression with batch format
-# ## for best results.
-# # content_encoding = "identity"
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# # data_format = "influx"
-
-
-# # Send metrics to Azure Application Insights
-# [[outputs.application_insights]]
-# ## Instrumentation key of the Application Insights resource.
-# instrumentation_key = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx"
-#
-# ## Regions that require endpoint modification https://docs.microsoft.com/en-us/azure/azure-monitor/app/custom-endpoints
-# # endpoint_url = "https://dc.services.visualstudio.com/v2/track"
-#
-# ## Timeout for closing (default: 5s).
-# # timeout = "5s"
-#
-# ## Enable additional diagnostic logging.
-# # enable_diagnostic_logging = false
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Context Tag Sources add Application Insights context tags to a tag value.
-# ##
-# ## For list of allowed context tag keys see:
-# ## https://github.com/microsoft/ApplicationInsights-Go/blob/master/appinsights/contracts/contexttagkeys.go
-# # [outputs.application_insights.context_tag_sources]
-# # "ai.cloud.role" = "kubernetes_container_name"
-# # "ai.cloud.roleInstance" = "kubernetes_pod_name"
-
-
-# # Sends metrics to Azure Data Explorer
-# [[outputs.azure_data_explorer]]
-# ## The URI property of the Azure Data Explorer resource on Azure
-# ## ex: endpoint_url = https://myadxresource.australiasoutheast.kusto.windows.net
-# endpoint_url = ""
-#
-# ## The Azure Data Explorer database that the metrics will be ingested into.
-# ## The plugin will NOT generate this database automatically, it's expected that this database already exists before ingestion.
-# ## ex: "exampledatabase"
-# database = ""
-#
-# ## Timeout for Azure Data Explorer operations
-# # timeout = "20s"
-#
-# ## Type of metrics grouping used when pushing to Azure Data Explorer.
-# ## Default is "TablePerMetric" for one table per different metric.
-# ## For more information, please check the plugin README.
-# # metrics_grouping_type = "TablePerMetric"
-#
-# ## Name of the single table to store all the metrics (Only needed if metrics_grouping_type is "SingleTable").
-# # table_name = ""
-#
-# ## Creates tables and relevant mapping if set to true(default).
-# ## Skips table and mapping creation if set to false, this is useful for running Telegraf with the lowest possible permissions i.e. table ingestor role.
-# # create_tables = true
-#
-# ## Ingestion method to use.
-# ## Available options are
-# ## - managed -- streaming ingestion with fallback to batched ingestion or the "queued" method below
-# ## - queued -- queue up metrics data and process sequentially
-# # ingestion_type = "queued"
-
-
-# # Send aggregate metrics to Azure Monitor
-# [[outputs.azure_monitor]]
-# ## Timeout for HTTP writes.
-# # timeout = "20s"
-#
-# ## Set the namespace prefix, defaults to "Telegraf/<input-name>".
-# # namespace_prefix = "Telegraf/"
-#
-# ## Azure Monitor doesn't have a string value type, so convert string
-# ## fields to dimensions (a.k.a. tags) if enabled. Azure Monitor allows
-# ## a maximum of 10 dimensions so Telegraf will only send the first 10
-# ## alphanumeric dimensions.
-# # strings_as_dimensions = false
-#
-# ## Both region and resource_id must be set or be available via the
-# ## Instance Metadata service on Azure Virtual Machines.
-# #
-# ## Azure Region to publish metrics against.
-# ## ex: region = "southcentralus"
-# # region = ""
-# #
-# ## The Azure Resource ID against which metric will be logged, e.g.
-# ## ex: resource_id = "/subscriptions/<subscription_id>/resourceGroups/<resource_group>/providers/Microsoft.Compute/virtualMachines/<vm_name>"
-# # resource_id = ""
-#
-# ## Optionally, if in Azure US Government, China, or other sovereign
-# ## cloud environment, set the appropriate REST endpoint for receiving
-# ## metrics. (Note: region may be unused in this context)
-# # endpoint_url = "https://monitoring.core.usgovcloudapi.net"
-#
-# ## Time limitations of metric to send
-# ## Documentation can be found here:
-# ## https://learn.microsoft.com/en-us/azure/azure-monitor/essentials/metrics-store-custom-rest-api?tabs=rest#timestamp
-# ## However, the returned (400) error message might document more strict or
-# ## relaxed settings. By default, only past metrics witin the limit are sent.
-# # timestamp_limit_past = "30m"
-
-
-# # Configuration for Google Cloud BigQuery to send entries
-# [[outputs.bigquery]]
-# ## Credentials File
-# credentials_file = "/path/to/service/account/key.json"
-#
-# ## Google Cloud Platform Project
-# # project = ""
-#
-# ## The namespace for the metric descriptor
-# dataset = "telegraf"
-#
-# ## Timeout for BigQuery operations.
-# # timeout = "5s"
-#
-# ## Character to replace hyphens on Metric name
-# # replace_hyphen_to = "_"
-#
-# ## Write all metrics in a single compact table
-# # compact_table = ""
-
-
-# ## Configuration to publish Telegraf metrics to Clarify
-# [[outputs.clarify]]
-# ## Credentials File (Oauth 2.0 from Clarify integration)
-# credentials_file = "/path/to/clarify/credentials.json"
-#
-# ## Clarify username password (Basic Auth from Clarify integration)
-# username = "i-am-bob"
-# password = "secret-password"
-#
-# ## Timeout for Clarify operations
-# # timeout = "20s"
-#
-# ## Optional tags to be included when generating the unique ID for a signal in Clarify
-# # id_tags = []
-# # clarify_id_tag = 'clarify_input_id'
-
-
-# # Publish Telegraf metrics to a Google Cloud PubSub topic
-# [[outputs.cloud_pubsub]]
-# ## Required. Name of Google Cloud Platform (GCP) Project that owns
-# ## the given PubSub topic.
-# project = "my-project"
-#
-# ## Required. Name of PubSub topic to publish metrics to.
-# topic = "my-topic"
-#
-# ## Content encoding for message payloads, can be set to "gzip" or
-# ## "identity" to apply no encoding.
-# # content_encoding = "identity"
-#
-# ## Required. Data format to consume.
-# ## Each data format has its own unique set of configuration options.
-# ## Read more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-#
-# ## Optional. Filepath for GCP credentials JSON file to authorize calls to
-# ## PubSub APIs. If not set explicitly, Telegraf will attempt to use
-# ## Application Default Credentials, which is preferred.
-# # credentials_file = "path/to/my/creds.json"
-#
-# ## Optional. If true, will send all metrics per write in one PubSub message.
-# # send_batched = true
-#
-# ## The following publish_* parameters specifically configures batching
-# ## requests made to the GCP Cloud PubSub API via the PubSub Golang library. Read
-# ## more here: https://godoc.org/cloud.google.com/go/pubsub/v2#PublishSettings
-#
-# ## Optional. Send a request to PubSub (i.e. actually publish a batch)
-# ## when it has this many PubSub messages. If send_batched is true,
-# ## this is ignored and treated as if it were 1.
-# # publish_count_threshold = 1000
-#
-# ## Optional. Send a request to PubSub (i.e. actually publish a batch)
-# ## when it has this many PubSub messages. If send_batched is true,
-# ## this is ignored and treated as if it were 1
-# # publish_byte_threshold = 1000000
-#
-# ## Optional. Specifically configures requests made to the PubSub API.
-# # publish_num_go_routines = 2
-#
-# ## Optional. Specifies a timeout for requests to the PubSub API.
-# # publish_timeout = "30s"
-#
-# ## Optional. If true, published PubSub message data will be base64-encoded.
-# # base64_data = false
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Optional. PubSub attributes to add to metrics.
-# # [outputs.cloud_pubsub.attributes]
-# # my_attr = "tag_value"
-
-
-# # Configuration for AWS CloudWatch output.
-# [[outputs.cloudwatch]]
-# ## Amazon REGION
-# region = "us-east-1"
-#
-# ## Amazon Credentials
-# ## Credentials are loaded in the following order
-# ## 1) Web identity provider credentials via STS if role_arn and
-# ## web_identity_token_file are specified
-# ## 2) Assumed credentials via STS if role_arn is specified
-# ## 3) explicit credentials from 'access_key' and 'secret_key'
-# ## 4) shared profile from 'profile'
-# ## 5) environment variables
-# ## 6) shared credentials file
-# ## 7) EC2 Instance Profile
-# #access_key = ""
-# #secret_key = ""
-# #token = ""
-# #role_arn = ""
-# #web_identity_token_file = ""
-# #role_session_name = ""
-# #profile = ""
-# #shared_credential_file = ""
-#
-# ## Endpoint to make request against, the correct endpoint is automatically
-# ## determined and this option should only be set if you wish to override the
-# ## default.
-# ## ex: endpoint_url = "http://localhost:8000"
-# # endpoint_url = ""
-#
-# ## Set http_proxy
-# # use_system_proxy = false
-# # http_proxy_url = "http://localhost:8888"
-#
-# ## Namespace for the CloudWatch MetricDatums
-# namespace = "InfluxData/Telegraf"
-#
-# ## If you have a large amount of metrics, you should consider to send
-# ## statistic values instead of raw metrics which could not only improve
-# ## performance but also save AWS API cost. If enable this flag, this plugin
-# ## would parse the required CloudWatch statistic fields (count, min, max, and
-# ## sum) and send them to CloudWatch. You could use basicstats aggregator to
-# ## calculate those fields. If not all statistic fields are available, all
-# ## fields would still be sent as raw metrics.
-# # write_statistics = false
-#
-# ## Enable high resolution metrics of 1 second (if not enabled, standard
-# ## resolution are of 60 seconds precision)
-# # high_resolution_metrics = false
-
-
-# # Configuration for AWS CloudWatchLogs output.
-# [[outputs.cloudwatch_logs]]
-# ## The region is the Amazon region that you wish to connect to.
-# ## Examples include but are not limited to:
-# ## - us-west-1
-# ## - us-west-2
-# ## - us-east-1
-# ## - ap-southeast-1
-# ## - ap-southeast-2
-# ## ...
-# region = "us-east-1"
-#
-# ## Amazon Credentials
-# ## Credentials are loaded in the following order
-# ## 1) Web identity provider credentials via STS if role_arn and
-# ## web_identity_token_file are specified
-# ## 2) Assumed credentials via STS if role_arn is specified
-# ## 3) explicit credentials from 'access_key' and 'secret_key'
-# ## 4) shared profile from 'profile'
-# ## 5) environment variables
-# ## 6) shared credentials file
-# ## 7) EC2 Instance Profile
-# #access_key = ""
-# #secret_key = ""
-# #token = ""
-# #role_arn = ""
-# #web_identity_token_file = ""
-# #role_session_name = ""
-# #profile = ""
-# #shared_credential_file = ""
-#
-# ## Endpoint to make request against, the correct endpoint is automatically
-# ## determined and this option should only be set if you wish to override the
-# ## default, e.g endpoint_url = "http://localhost:8000"
-# # endpoint_url = ""
-#
-# ## Cloud watch log group. Must be created in AWS cloudwatch logs upfront!
-# ## For example, you can specify the name of the k8s cluster here to group logs
-# ## from all cluster in oine place
-# log_group = "my-group-name"
-#
-# ## Log stream in log group
-# ## Either log group name or reference to metric attribute, from which it can
-# ## be parsed, tag:<TAG_NAME> or field:<FIELD_NAME>. If the log stream is not
-# ## exist, it will be created. Since AWS is not automatically delete logs
-# ## streams with expired logs entries (i.e. empty log stream) you need to put
-# ## in place appropriate house-keeping (https://forums.aws.amazon.com/thread.jspa?threadID=178855)
-# log_stream = "tag:location"
-#
-# ## Source of log data - metric name
-# ## specify the name of the metric, from which the log data should be
-# ## retrieved. I.e., if you are using docker_log plugin to stream logs from
-# ## container, then specify log_data_metric_name = "docker_log"
-# log_data_metric_name = "docker_log"
-#
-# ## Specify from which metric attribute the log data should be retrieved:
-# ## tag:<TAG_NAME> or field:<FIELD_NAME>.
-# ## I.e., if you are using docker_log plugin to stream logs from container,
-# ## then specify log_data_source = "field:message"
-# log_data_source = "field:message"
-
-
-# # Configuration for CrateDB to send metrics to.
-# [[outputs.cratedb]]
-# ## Connection parameters for accessing the database see
-# ## https://pkg.go.dev/github.com/jackc/pgx/v4#ParseConfig
-# ## for available options
-# url = "postgres://user:password@localhost/schema?sslmode=disable"
-#
-# ## Timeout for all CrateDB queries.
-# # timeout = "5s"
-#
-# ## Name of the table to store metrics in.
-# # table = "metrics"
-#
-# ## If true, and the metrics table does not exist, create it automatically.
-# # table_create = false
-#
-# ## The character(s) to replace any '.' in an object key with
-# # key_separator = "_"
-
-
-# # Configuration for DataDog API to send metrics to.
-# [[outputs.datadog]]
-# ## Datadog API key
-# apikey = "my-secret-key"
-#
-# ## Connection timeout.
-# # timeout = "5s"
-#
-# ## Write URL override; useful for debugging.
-# ## This plugin only supports the v1 API currently due to the authentication
-# ## method used.
-# # url = "https://app.datadoghq.com/api/v1/series"
-#
-# ## Set http_proxy
-# # use_system_proxy = false
-# # http_proxy_url = "http://localhost:8888"
-#
-# ## Override the default (none) compression used to send data.
-# ## Supports: "zlib", "none"
-# # compression = "none"
-#
-# ## When non-zero, converts count metrics submitted by inputs.statsd
-# ## into rate, while dividing the metric value by this number.
-# ## Note that in order for metrics to be submitted simultaenously alongside
-# ## a Datadog agent, rate_interval has to match the interval used by the
-# ## agent - which defaults to 10s
-# # rate_interval = 0s
-
-
-# # Send metrics to nowhere at all
-# [[outputs.discard]]
-# # no configuration
-
-
-# # Send telegraf metrics to a Dynatrace environment
-# [[outputs.dynatrace]]
-# ## For usage with the Dynatrace OneAgent you can omit any configuration,
-# ## the only requirement is that the OneAgent is running on the same host.
-# ## Only setup environment url and token if you want to monitor a Host without the OneAgent present.
-# ##
-# ## Your Dynatrace environment URL.
-# ## For Dynatrace OneAgent you can leave this empty or set it to "http://127.0.0.1:14499/metrics/ingest" (default)
-# ## For Dynatrace SaaS environments the URL scheme is "https://{your-environment-id}.live.dynatrace.com/api/v2/metrics/ingest"
-# ## For Dynatrace Managed environments the URL scheme is "https://{your-domain}/e/{your-environment-id}/api/v2/metrics/ingest"
-# url = ""
-#
-# ## Your Dynatrace API token.
-# ## Create an API token within your Dynatrace environment, by navigating to Settings > Integration > Dynatrace API
-# ## The API token needs data ingest scope permission. When using OneAgent, no API token is required.
-# api_token = ""
-#
-# ## Optional prefix for metric names (e.g.: "telegraf")
-# prefix = "telegraf"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Optional flag for ignoring tls certificate check
-# # insecure_skip_verify = false
-#
-# ## Connection timeout, defaults to "5s" if not set.
-# timeout = "5s"
-#
-# ## If you want metrics to be treated and reported as delta counters, add the metric names here
-# additional_counters = [ ]
-#
-# ## In addition or as an alternative to additional_counters, if you want metrics to be treated and
-# ## reported as delta counters using regular expression pattern matching
-# additional_counters_patterns = [ ]
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Optional dimensions to be added to every metric
-# # [outputs.dynatrace.default_dimensions]
-# # default_key = "default value"
-
-
-# # Configuration for Elasticsearch to send metrics to.
-# [[outputs.elasticsearch]]
-# ## The full HTTP endpoint URL for your Elasticsearch instance
-# ## Multiple urls can be specified as part of the same cluster,
-# ## this means that only ONE of the urls will be written to each interval
-# urls = [ "http://node1.es.example.com:9200" ] # required.
-# ## Elasticsearch client timeout, defaults to "5s" if not set.
-# timeout = "5s"
-# ## Set to true to ask Elasticsearch a list of all cluster nodes,
-# ## thus it is not necessary to list all nodes in the urls config option
-# enable_sniffer = false
-# ## Set to true to enable gzip compression
-# enable_gzip = false
-# ## Set the interval to check if the Elasticsearch nodes are available
-# ## Setting to "0s" will disable the health check (not recommended in production)
-# health_check_interval = "10s"
-# ## Set the timeout for periodic health checks.
-# # health_check_timeout = "1s"
-# ## HTTP basic authentication details.
-# ## HTTP basic authentication details
-# # username = "telegraf"
-# # password = "mypassword"
-# ## HTTP bearer token authentication details
-# # auth_bearer_token = "eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9"
-#
-# ## Index Config
-# ## The target index for metrics (Elasticsearch will create if it not exists).
-# ## You can use the date specifiers below to create indexes per time frame.
-# ## The metric timestamp will be used to decide the destination index name
-# # %Y - year (2016)
-# # %y - last two digits of year (00..99)
-# # %m - month (01..12)
-# # %d - day of month (e.g., 01)
-# # %H - hour (00..23)
-# # %V - week of the year (ISO week) (01..53)
-# ## Additionally, you can specify a tag name using the notation {{tag_name}}
-# ## which will be used as part of the index name. If the tag does not exist,
-# ## the default tag value will be used.
-# # index_name = "telegraf-{{host}}-%Y.%m.%d"
-# # default_tag_value = "none"
-# index_name = "telegraf-%Y.%m.%d" # required.
-#
-# ## Optional Index Config
-# ## Set to true if Telegraf should use the "create" OpType while indexing
-# # use_optype_create = false
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Template Config
-# ## Set to true if you want telegraf to manage its index template.
-# ## If enabled it will create a recommended index template for telegraf indexes
-# manage_template = true
-# ## The template name used for telegraf indexes
-# template_name = "telegraf"
-# ## Set to true if you want telegraf to overwrite an existing template
-# overwrite_template = false
-# ## If set to true a unique ID hash will be sent as sha256(concat(timestamp,measurement,series-hash)) string
-# ## it will enable data resend and update metric points avoiding duplicated metrics with different id's
-# force_document_id = false
-#
-# ## Specifies the handling of NaN and Inf values.
-# ## This option can have the following values:
-# ## none -- do not modify field-values (default); will produce an error if NaNs or infs are encountered
-# ## drop -- drop fields containing NaNs or infs
-# ## replace -- replace with the value in "float_replacement_value" (default: 0.0)
-# ## NaNs and inf will be replaced with the given number, -inf with the negative of that number
-# # float_handling = "none"
-# # float_replacement_value = 0.0
-#
-# ## Pipeline Config
-# ## To use a ingest pipeline, set this to the name of the pipeline you want to use.
-# # use_pipeline = "my_pipeline"
-# ## Additionally, you can specify a tag name using the notation {{tag_name}}
-# ## which will be used as part of the pipeline name. If the tag does not exist,
-# ## the default pipeline will be used as the pipeline. If no default pipeline is set,
-# ## no pipeline is used for the metric.
-# # use_pipeline = "{{es_pipeline}}"
-# # default_pipeline = "my_pipeline"
-# #
-# ## Custom HTTP Headers
-# ## To pass custom HTTP headers please define it in a given below section
-# # [outputs.elasticsearch.headers]
-# # "X-Custom-Header" = ["custom-value1", "custom-value2"]
-#
-# ## Template Index Settings
-# ## Overrides the template settings.index section with any provided options.
-# ## Defaults provided here in the config
-# # template_index_settings = {
-# # refresh_interval = "10s",
-# # mapping.total_fields.limit = 5000,
-# # auto_expand_replicas = "0-1",
-# # codec = "best_compression"
-# # }
-
-
-# # Configuration for Event Hubs output plugin
-# [[outputs.event_hubs]]
-# ## Full connection string to the Event Hub instance. The shared access key
-# ## must have "Send" permissions on the target Event Hub.
-# connection_string = "Endpoint=sb://namespace.servicebus.windows.net/;SharedAccessKeyName=RootManageSharedAccessKey;SharedAccessKey=superSecret1234=;EntityPath=hubName"
-#
-# ## Partition key to use for the event
-# ## Metric tag or field name to use for the event partition key. The value of
-# ## this tag or field is set as the key for events if it exists. If both, tag
-# ## and field, exist the tag is preferred.
-# # partition_key = ""
-#
-# ## Set the maximum batch message size in bytes
-# ## The allowable size depends on the Event Hub tier, see
-# ## https://learn.microsoft.com/azure/event-hubs/event-hubs-quotas#basic-vs-standard-vs-premium-vs-dedicated-tiers
-# ## for details. If unset the default size defined by Azure Event Hubs is
-# ## used (currently 1,000,000 bytes)
-# # max_message_size = "1MB"
-#
-# ## Timeout for sending the data
-# # timeout = "30s"
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# data_format = "json"
-
-
-# # Send metrics to command as input over stdin
-# [[outputs.exec]]
-# ## Command to ingest metrics via stdin.
-# command = ["tee", "-a", "/dev/null"]
-#
-# ## Environment variables
-# ## Array of "key=value" pairs to pass as environment variables
-# ## e.g. "KEY=value", "USERNAME=John Doe",
-# ## "LD_LIBRARY_PATH=/opt/custom/lib64:/usr/local/libs"
-# # environment = []
-#
-# ## Timeout for command to complete.
-# # timeout = "5s"
-#
-# ## Whether the command gets executed once per metric, or once per metric batch
-# ## The serializer will also run in batch mode when this is true.
-# # use_batch_format = true
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# # data_format = "influx"
-
-
-# # Run executable as long-running output plugin
-# [[outputs.execd]]
-# ## One program to run as daemon.
-# ## NOTE: process and each argument should each be their own string
-# command = ["my-telegraf-output", "--some-flag", "value"]
-#
-# ## Environment variables
-# ## Array of "key=value" pairs to pass as environment variables
-# ## e.g. "KEY=value", "USERNAME=John Doe",
-# ## "LD_LIBRARY_PATH=/opt/custom/lib64:/usr/local/libs"
-# # environment = []
-#
-# ## Delay before the process is restarted after an unexpected termination
-# restart_delay = "10s"
-#
-# ## Flag to determine whether execd should throw error when part of metrics is unserializable
-# ## Setting this to true will skip the unserializable metrics and process the rest of metrics
-# ## Setting this to false will throw error when encountering unserializable metrics and none will be processed
-# ## This setting does not apply when use_batch_format is set.
-# # ignore_serialization_error = false
-#
-# ## Use batch serialization instead of per metric. The batch format allows for the
-# ## production of batch output formats and may more efficiently encode and write metrics.
-# # use_batch_format = false
-#
-# ## Data format to export.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# data_format = "influx"
-
-
-# # Send telegraf metrics to file(s)
-# [[outputs.file]]
-# ## Files to write to, "stdout" is a specially handled file.
-# files = ["stdout", "/tmp/metrics.out"]
-#
-# ## Use batch serialization format instead of line based delimiting. The
-# ## batch format allows for the production of non line based output formats and
-# ## may more efficiently encode and write metrics.
-# # use_batch_format = false
-#
-# ## The file will be rotated after the time interval specified. When set
-# ## to 0 no time based rotation is performed.
-# # rotation_interval = "0h"
-#
-# ## The logfile will be rotated when it becomes larger than the specified
-# ## size. When set to 0 no size based rotation is performed.
-# # rotation_max_size = "0MB"
-#
-# ## Maximum number of rotated archives to keep, any older logs are deleted.
-# ## If set to -1, no archives are removed.
-# # rotation_max_archives = 5
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# data_format = "influx"
-#
-# ## Compress output data with the specified algorithm.
-# ## If empty, compression will be disabled and files will be plain text.
-# ## Supported algorithms are "zstd", "gzip" and "zlib".
-# # compression_algorithm = ""
-#
-# ## Compression level for the algorithm above.
-# ## Please note that different algorithms support different levels:
-# ## zstd -- supports levels 1, 3, 7 and 11.
-# ## gzip -- supports levels 0, 1 and 9.
-# ## zlib -- supports levels 0, 1, and 9.
-# ## By default the default compression level for each algorithm is used.
-# # compression_level = -1
-
-
-# # Configuration for Graphite server to send metrics to
-# [[outputs.graphite]]
-# ## TCP endpoint for your graphite instance.
-# ## If multiple endpoints are configured, the output will be load balanced.
-# ## Only one of the endpoints will be written to with each iteration.
-# servers = ["localhost:2003"]
-#
-# ## Local address to bind when connecting to the server
-# ## If empty or not set, the local address is automatically chosen.
-# # local_address = ""
-#
-# ## Prefix metrics name
-# prefix = ""
-#
-# ## Graphite output template
-# ## see https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# template = "host.tags.measurement.field"
-#
-# ## Strict sanitization regex
-# ## This is the default sanitization regex that is used on data passed to the
-# ## graphite serializer. Users can add additional characters here if required.
-# ## Be aware that the characters, '/' '@' '*' are always replaced with '_',
-# ## '..' is replaced with '.', and '\' is removed even if added to the
-# ## following regex.
-# # graphite_strict_sanitize_regex = '[^a-zA-Z0-9-:._=\p{L}]'
-#
-# ## Enable Graphite tags support
-# # graphite_tag_support = false
-#
-# ## Applied sanitization mode when graphite tag support is enabled.
-# ## * strict - uses the regex specified above
-# ## * compatible - allows for greater number of characters
-# # graphite_tag_sanitize_mode = "strict"
-#
-# ## Character for separating metric name and field for Graphite tags
-# # graphite_separator = "."
-#
-# ## Graphite templates patterns
-# ## 1. Template for cpu
-# ## 2. Template for disk*
-# ## 3. Default template
-# # templates = [
-# # "cpu tags.measurement.host.field",
-# # "disk* measurement.field",
-# # "host.measurement.tags.field"
-# #]
-#
-# ## timeout in seconds for the write connection to graphite
-# # timeout = "2s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Send telegraf metrics to graylog
-# [[outputs.graylog]]
-# ## Endpoints for your graylog instances.
-# servers = ["udp://127.0.0.1:12201"]
-#
-# ## Connection timeout.
-# # timeout = "5s"
-#
-# ## The field to use as the GELF short_message, if unset the static string
-# ## "telegraf" will be used.
-# ## example: short_message_field = "message"
-# # short_message_field = ""
-#
-# ## According to GELF payload specification, additional fields names must be prefixed
-# ## with an underscore. Previous versions did not prefix custom field 'name' with underscore.
-# ## Set to true for backward compatibility.
-# # name_field_no_prefix = false
-#
-# ## Connection retry options
-# ## Attempt to connect to the endpoints if the initial connection fails.
-# ## If 'false', Telegraf will give up after 3 connection attempt and will
-# ## exit with an error. If set to 'true', the plugin will retry to connect
-# ## to the unconnected endpoints infinitely.
-# # connection_retry = false
-# ## Time to wait between connection retry attempts.
-# # connection_retry_wait_time = "15s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Send telegraf metrics to GroundWork Monitor
-# [[outputs.groundwork]]
-# ## URL of your groundwork instance.
-# url = "https://groundwork.example.com"
-#
-# ## Agent uuid for GroundWork API Server.
-# agent_id = ""
-#
-# ## Username and password to access GroundWork API.
-# username = ""
-# password = ""
-#
-# ## Default application type to use in GroundWork client
-# # default_app_type = "TELEGRAF"
-#
-# ## Default display name for the host with services(metrics).
-# # default_host = "telegraf"
-#
-# ## Default service state.
-# # default_service_state = "SERVICE_OK"
-#
-# ## The name of the tag that contains the hostname.
-# # resource_tag = "host"
-#
-# ## The name of the tag that contains the host group name.
-# # group_tag = "group"
-
-
-# # Configurable HTTP health check resource based on metrics
-# [[outputs.health]]
-# ## Address and port to listen on.
-# ## ex: service_address = "http://localhost:8080"
-# ## service_address = "unix:///var/run/telegraf-health.sock"
-# # service_address = "http://:8080"
-#
-# ## The maximum duration for reading the entire request.
-# # read_timeout = "5s"
-# ## The maximum duration for writing the entire response.
-# # write_timeout = "5s"
-#
-# ## Username and password to accept for HTTP basic authentication.
-# # basic_username = "user1"
-# # basic_password = "secret"
-#
-# ## Allowed CA certificates for client certificates.
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## TLS server certificate and private key.
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Maximum expected time between metrics being written
-# ## Enforces an unhealthy state if there was no new metric seen for at least
-# ## the specified time. The check is disabled by default and only used if a
-# ## positive time is specified.
-# # max_time_between_metrics = "0s"
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## One or more check sub-tables should be defined, it is also recommended to
-# ## use metric filtering to limit the metrics that flow into this output.
-# ##
-# ## When using the default buffer sizes, this example will fail when the
-# ## metric buffer is half full.
-# ##
-# ## namepass = ["internal_write"]
-# ## tagpass = { output = ["influxdb"] }
-# ##
-# ## [[outputs.health.compares]]
-# ## field = "buffer_size"
-# ## lt = 5000.0
-# ##
-# ## [[outputs.health.contains]]
-# ## field = "buffer_size"
-
-
-# # A plugin that can transmit metrics over HTTP
-# [[outputs.http]]
-# ## URL is the address to send metrics to
-# url = "http://127.0.0.1:8080/telegraf"
-#
-# ## Timeout for HTTP message
-# # timeout = "5s"
-#
-# ## HTTP method, one of: "POST" or "PUT" or "PATCH"
-# # method = "POST"
-#
-# ## HTTP Basic Auth credentials
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## OAuth2 Client Credentials Grant
-# # client_id = "clientid"
-# # client_secret = "secret"
-# # token_url = "https://indentityprovider/oauth2/v1/token"
-# # audience = ""
-# # scopes = ["urn:opc:idm:__myscopes__"]
-#
-# ## Goole API Auth
-# # google_application_credentials = "/etc/telegraf/example_secret.json"
-#
-# ## HTTP Proxy support
-# # use_system_proxy = false
-# # http_proxy_url = ""
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Optional Cookie authentication
-# # cookie_auth_url = "https://localhost/authMe"
-# # cookie_auth_method = "POST"
-# # cookie_auth_username = "username"
-# # cookie_auth_password = "pa$$word"
-# # cookie_auth_headers = '{"Content-Type": "application/json", "X-MY-HEADER":"hello"}'
-# # cookie_auth_body = '{"username": "user", "password": "pa$$word", "authenticate": "me"}'
-# ## cookie_auth_renewal not set or set to "0" will auth once and never renew the cookie
-# # cookie_auth_renewal = "5m"
-#
-# ## Data format to output.
-# ## Each data format has it's own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# # data_format = "influx"
-#
-# ## Use batch serialization format (default) instead of line based format.
-# ## Batch format is more efficient and should be used unless line based
-# ## format is really needed.
-# # use_batch_format = true
-#
-# ## HTTP Content-Encoding for write request body, can be set to "gzip" to
-# ## compress body or "identity" to apply no encoding.
-# # content_encoding = "identity"
-#
-# ## MaxIdleConns controls the maximum number of idle (keep-alive)
-# ## connections across all hosts. Zero means no limit.
-# # max_idle_conn = 0
-#
-# ## MaxIdleConnsPerHost, if non-zero, controls the maximum idle
-# ## (keep-alive) connections to keep per-host. If zero,
-# ## DefaultMaxIdleConnsPerHost is used(2).
-# # max_idle_conn_per_host = 2
-#
-# ## Idle (keep-alive) connection timeout.
-# ## Maximum amount of time before idle connection is closed.
-# ## Zero means no limit.
-# # idle_conn_timeout = 0
-#
-# ## Amazon Region
-# #region = "us-east-1"
-#
-# ## Amazon Credentials
-# ## Amazon Credentials are not built unless the following aws_service
-# ## setting is set to a non-empty string. It may need to match the name of
-# ## the service output to as well
-# #aws_service = "execute-api"
-#
-# ## Credentials are loaded in the following order
-# ## 1) Web identity provider credentials via STS if role_arn and web_identity_token_file are specified
-# ## 2) Assumed credentials via STS if role_arn is specified
-# ## 3) explicit credentials from 'access_key' and 'secret_key'
-# ## 4) shared profile from 'profile'
-# ## 5) environment variables
-# ## 6) shared credentials file
-# ## 7) EC2 Instance Profile
-# #access_key = ""
-# #secret_key = ""
-# #token = ""
-# #role_arn = ""
-# #web_identity_token_file = ""
-# #role_session_name = ""
-# #profile = ""
-# #shared_credential_file = ""
-#
-# ## Optional list of statuscodes (<200 or >300) upon which requests should not be retried
-# # non_retryable_statuscodes = [409, 413]
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Additional HTTP headers
-# # [outputs.http.headers]
-# # ## Should be set manually to "application/json" for json data_format
-# # Content-Type = "text/plain; charset=utf-8"
-
-
-# # Configuration for sending metrics to InfluxDB
-# [[outputs.influxdb]]
-# ## The full HTTP or UDP URL for your InfluxDB instance.
-# ##
-# ## Multiple URLs can be specified for a single cluster, only ONE of the
-# ## urls will be written to each interval.
-# # urls = ["unix:///var/run/influxdb.sock"]
-# # urls = ["udp://127.0.0.1:8089"]
-# # urls = ["http://127.0.0.1:8086"]
-#
-# ## Local address to bind when connecting to the server
-# ## If empty or not set, the local address is automatically chosen.
-# # local_address = ""
-#
-# ## The target database for metrics; will be created as needed.
-# ## For UDP url endpoint database needs to be configured on server side.
-# # database = "telegraf"
-#
-# ## The value of this tag will be used to determine the database. If this
-# ## tag is not set the 'database' option is used as the default.
-# # database_tag = ""
-#
-# ## If true, the 'database_tag' will not be included in the written metric.
-# # exclude_database_tag = false
-#
-# ## If true, no CREATE DATABASE queries will be sent. Set to true when using
-# ## Telegraf with a user without permissions to create databases or when the
-# ## database already exists.
-# # skip_database_creation = false
-#
-# ## Name of existing retention policy to write to. Empty string writes to
-# ## the default retention policy. Only takes effect when using HTTP.
-# # retention_policy = ""
-#
-# ## The value of this tag will be used to determine the retention policy. If this
-# ## tag is not set the 'retention_policy' option is used as the default.
-# # retention_policy_tag = ""
-#
-# ## If true, the 'retention_policy_tag' will not be included in the written metric.
-# # exclude_retention_policy_tag = false
-#
-# ## Write consistency (clusters only), can be: "any", "one", "quorum", "all".
-# ## Only takes effect when using HTTP.
-# # write_consistency = "any"
-#
-# ## Timeout for HTTP messages.
-# # timeout = "5s"
-#
-# ## HTTP Basic Auth
-# # username = "telegraf"
-# # password = "metricsmetricsmetricsmetrics"
-#
-# ## HTTP User-Agent
-# # user_agent = "telegraf"
-#
-# ## UDP payload size is the maximum packet size to send.
-# # udp_payload = "512B"
-#
-# ## Optional TLS Config for use on HTTP connections.
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## HTTP Proxy override, if unset values the standard proxy environment
-# ## variables are consulted to determine which proxy, if any, should be used.
-# # http_proxy = "http://corporate.proxy:3128"
-#
-# ## Additional HTTP headers
-# # http_headers = {"X-Special-Header" = "Special-Value"}
-#
-# ## HTTP Content-Encoding for write request body, can be set to "gzip" to
-# ## compress body or "identity" to apply no encoding.
-# # content_encoding = "gzip"
-#
-# ## When true, Telegraf will output unsigned integers as unsigned values,
-# ## i.e.: "42u". You will need a version of InfluxDB supporting unsigned
-# ## integer values. Enabling this option will result in field type errors if
-# ## existing data has been written.
-# # influx_uint_support = false
-#
-# ## When true, Telegraf will omit the timestamp on data to allow InfluxDB
-# ## to set the timestamp of the data during ingestion. This is generally NOT
-# ## what you want as it can lead to data points captured at different times
-# ## getting omitted due to similar data.
-# # influx_omit_timestamp = false
-
-
-# # Send telegraf metrics to Apache Inlong
-# [[outputs.inlong]]
-# ## Manager URL to obtain the Inlong data-proxy IP list for sending the data
-# url = "http://127.0.0.1:8083"
-#
-# ## Unique identifier for the data-stream group
-# group_id = "telegraf"
-#
-# ## Unique identifier for the data stream within its group
-# stream_id = "telegraf"
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# # data_format = "influx"
-
-
-# # Configuration for sending metrics to an Instrumental project
-# [[outputs.instrumental]]
-# ## Project API Token (required)
-# api_token = "API Token" # required
-# ## Prefix the metrics with a given name
-# prefix = ""
-# ## Stats output template (Graphite formatting)
-# ## see https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md#graphite
-# template = "host.tags.measurement.field"
-# ## Timeout in seconds to connect
-# timeout = "2s"
-# ## Debug true - Print communication to Instrumental
-# debug = false
-
-
-# # Save metrics to an IoTDB Database
-# [[outputs.iotdb]]
-# ## Configuration of IoTDB server connection
-# host = "127.0.0.1"
-# # port = "6667"
-#
-# ## Configuration of authentication
-# # user = "root"
-# # password = "root"
-#
-# ## Timeout to open a new session.
-# ## A value of zero means no timeout.
-# # timeout = "5s"
-#
-# ## Configuration of type conversion for 64-bit unsigned int
-# ## IoTDB currently DOES NOT support unsigned integers (version 13.x).
-# ## 32-bit unsigned integers are safely converted into 64-bit signed integers by the plugin,
-# ## however, this is not true for 64-bit values in general as overflows may occur.
-# ## The following setting allows to specify the handling of 64-bit unsigned integers.
-# ## Available values are:
-# ## - "int64" -- convert to 64-bit signed integers and accept overflows
-# ## - "int64_clip" -- convert to 64-bit signed integers and clip the values on overflow to 9,223,372,036,854,775,807
-# ## - "text" -- convert to the string representation of the value
-# # uint64_conversion = "int64_clip"
-#
-# ## Configuration of TimeStamp
-# ## TimeStamp is always saved in 64bits int. timestamp_precision specifies the unit of timestamp.
-# ## Available value:
-# ## "second", "millisecond", "microsecond", "nanosecond"(default)
-# # timestamp_precision = "nanosecond"
-#
-# ## Handling of tags
-# ## Tags are not fully supported by IoTDB.
-# ## A guide with suggestions on how to handle tags can be found here:
-# ## https://iotdb.apache.org/UserGuide/Master/API/InfluxDB-Protocol.html
-# ##
-# ## Available values are:
-# ## - "fields" -- convert tags to fields in the measurement
-# ## - "device_id" -- attach tags to the device ID
-# ##
-# ## For Example, a metric named "root.sg.device" with the tags `tag1: "private"` and `tag2: "working"` and
-# ## fields `s1: 100` and `s2: "hello"` will result in the following representations in IoTDB
-# ## - "fields" -- root.sg.device, s1=100, s2="hello", tag1="private", tag2="working"
-# ## - "device_id" -- root.sg.device.private.working, s1=100, s2="hello"
-# # convert_tags_to = "device_id"
-#
-# ## Handling of unsupported characters
-# ## Some characters in different versions of IoTDB are not supported in path name
-# ## A guide with suggetions on valid paths can be found here:
-# ## for iotdb 0.13.x -> https://iotdb.apache.org/UserGuide/V0.13.x/Reference/Syntax-Conventions.html#identifiers
-# ## for iotdb 1.x.x and above -> https://iotdb.apache.org/UserGuide/V1.3.x/User-Manual/Syntax-Rule.html#identifier
-# ##
-# ## Available values are:
-# ## - "1.0", "1.1", "1.2", "1.3" -- use backticks to enclose tags with forbidden characters
-# ## such as @$#:[]{}() and space
-# ## - "0.13" -- use backticks to enclose tags with forbidden characters
-# ## such as space
-# ## Keep this section commented if you don't want to sanitize the path
-# # sanitize_tag = "1.3"
-
-
-# # Configuration for the Kafka server to send metrics to
-# [[outputs.kafka]]
-# ## URLs of kafka brokers
-# ## The brokers listed here are used to connect to collect metadata about a
-# ## cluster. However, once the initial metadata collect is completed, telegraf
-# ## will communicate solely with the kafka leader and not all defined brokers.
-# brokers = ["localhost:9092"]
-#
-# ## Kafka topic for producer messages
-# topic = "telegraf"
-#
-# ## Tag value to be used as the topic. If not set or the tag does not exist,
-# ## the 'topic' option is used.
-# # topic_tag = ""
-#
-# ## If true, the 'topic_tag' will be removed from to the metric.
-# # exclude_topic_tag = false
-#
-# ## Optional Client id
-# # client_id = "Telegraf"
-#
-# ## Set the minimal supported Kafka version. Setting this enables the use of new
-# ## Kafka features and APIs. Of particular interested, lz4 compression
-# ## requires at least version 0.10.0.0.
-# ## ex: version = "1.1.0"
-# # version = ""
-#
-# ## The routing tag specifies a tagkey on the metric whose value is used as
-# ## the message key. The message key is used to determine which partition to
-# ## send the message to. This tag is preferred over the routing_key option.
-# routing_tag = "host"
-#
-# ## The routing key is set as the message key and used to determine which
-# ## partition to send the message to. This value is only used when no
-# ## routing_tag is set or as a fallback when the tag specified in routing tag
-# ## is not found.
-# ##
-# ## If set to "random", a random value will be generated for each message.
-# ##
-# ## When unset, no message key is added and each message is routed to a random
-# ## partition.
-# ##
-# ## ex: routing_key = "random"
-# ## routing_key = "telegraf"
-# # routing_key = ""
-#
-# ## Compression codec represents the various compression codecs recognized by
-# ## Kafka in messages.
-# ## 0 : None
-# ## 1 : Gzip
-# ## 2 : Snappy
-# ## 3 : LZ4
-# ## 4 : ZSTD
-# # compression_codec = 0
-#
-# ## Idempotent Writes
-# ## If enabled, exactly one copy of each message is written.
-# # idempotent_writes = false
-#
-# ## RequiredAcks is used in Produce Requests to tell the broker how many
-# ## replica acknowledgements it must see before responding
-# ## 0 : the producer never waits for an acknowledgement from the broker.
-# ## This option provides the lowest latency but the weakest durability
-# ## guarantees (some data will be lost when a server fails).
-# ## 1 : the producer gets an acknowledgement after the leader replica has
-# ## received the data. This option provides better durability as the
-# ## client waits until the server acknowledges the request as successful
-# ## (only messages that were written to the now-dead leader but not yet
-# ## replicated will be lost).
-# ## -1: the producer gets an acknowledgement after all in-sync replicas have
-# ## received the data. This option provides the best durability, we
-# ## guarantee that no messages will be lost as long as at least one in
-# ## sync replica remains.
-# # required_acks = -1
-#
-# ## The maximum number of times to retry sending a metric before failing
-# ## until the next flush.
-# # max_retry = 3
-#
-# ## The maximum permitted size of a message. Should be set equal to or
-# ## smaller than the broker's 'message.max.bytes'.
-# # max_message_bytes = 1000000
-#
-# ## Producer timestamp
-# ## This option sets the timestamp of the kafka producer message, choose from:
-# ## * metric: Uses the metric's timestamp
-# ## * now: Uses the time of write
-# # producer_timestamp = metric
-#
-# ## Add metric name as specified kafka header if not empty
-# # metric_name_header = ""
-#
-# ## Optional TLS Config
-# # enable_tls = false
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Period between keep alive probes.
-# ## Defaults to the OS configuration if not specified or zero.
-# # keep_alive_period = "15s"
-#
-# ## Optional SOCKS5 proxy to use when connecting to brokers
-# # socks5_enabled = true
-# # socks5_address = "127.0.0.1:1080"
-# # socks5_username = "alice"
-# # socks5_password = "pass123"
-#
-# ## Optional SASL Config
-# # sasl_username = ""
-# # sasl_password = ""
-#
-# ## Optional SASL, one of:
-# ## OAUTHBEARER, PLAIN, SCRAM-SHA-256, SCRAM-SHA-512, GSSAPI, AWS-MSK-IAM
-# # sasl_mechanism = ""
-#
-# ## Used if sasl_mechanism is GSSAPI
-# # sasl_gssapi_service_name = ""
-# # ## One of: KRB5_USER_AUTH and KRB5_KEYTAB_AUTH
-# # sasl_gssapi_auth_type = "KRB5_USER_AUTH"
-# # sasl_gssapi_kerberos_config_path = "/"
-# # sasl_gssapi_realm = "realm"
-# # sasl_gssapi_key_tab_path = ""
-# # sasl_gssapi_disable_pafxfast = false
-#
-# ## Access token used if sasl_mechanism is OAUTHBEARER
-# # sasl_access_token = ""
-#
-# ## Used if sasl_mechanism is AWS-MSK-IAM
-# # sasl_aws_msk_iam_region = ""
-# ## for profile based auth
-# ## sasl_aws_msk_iam_profile = ""
-# ## for role based auth
-# ## sasl_aws_msk_iam_role = ""
-# ## sasl_aws_msk_iam_session = ""
-#
-# ## Arbitrary key value string pairs to pass as a TOML table. For example:
-# ## {logicalCluster = "cluster-042", poolId = "pool-027"}
-# # sasl_extensions = {}
-#
-# ## SASL protocol version. When connecting to Azure EventHub set to 0.
-# # sasl_version = 1
-#
-# ## Disable Kafka metadata full fetch
-# # metadata_full = false
-#
-# ## Maximum number of retries for metadata operations including
-# ## connecting. Sets Sarama library's Metadata.Retry.Max config value. If 0 or
-# ## unset, use the Sarama default of 3,
-# # metadata_retry_max = 0
-#
-# ## Type of retry backoff. Valid options: "constant", "exponential"
-# # metadata_retry_type = "constant"
-#
-# ## Amount of time to wait before retrying. When metadata_retry_type is
-# ## "constant", each retry is delayed this amount. When "exponential", the
-# ## first retry is delayed this amount, and subsequent delays are doubled. If 0
-# ## or unset, use the Sarama default of 250 ms
-# # metadata_retry_backoff = 0
-#
-# ## Maximum amount of time to wait before retrying when metadata_retry_type is
-# ## "exponential". Ignored for other retry types. If 0, there is no backoff
-# ## limit.
-# # metadata_retry_max_duration = 0
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# # data_format = "influx"
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Optional topic suffix configuration.
-# ## If the section is omitted, no suffix is used.
-# ## Following topic suffix methods are supported:
-# ## measurement - suffix equals to separator + measurement's name
-# ## tags - suffix equals to separator + specified tags' values
-# ## interleaved with separator
-#
-# ## Suffix equals to "_" + measurement name
-# # [outputs.kafka.topic_suffix]
-# # method = "measurement"
-# # separator = "_"
-#
-# ## Suffix equals to "__" + measurement's "foo" tag value.
-# ## If there's no such a tag, suffix equals to an empty string
-# # [outputs.kafka.topic_suffix]
-# # method = "tags"
-# # keys = ["foo"]
-# # separator = "__"
-#
-# ## Suffix equals to "_" + measurement's "foo" and "bar"
-# ## tag values, separated by "_". If there is no such tags,
-# ## their values treated as empty strings.
-# # [outputs.kafka.topic_suffix]
-# # method = "tags"
-# # keys = ["foo", "bar"]
-# # separator = "_"
-
-
-# # Configuration for the AWS Kinesis output.
-# [[outputs.kinesis]]
-# ## Amazon REGION of kinesis endpoint.
-# region = "ap-southeast-2"
-#
-# ## Amazon Credentials
-# ## Credentials are loaded in the following order
-# ## 1) Web identity provider credentials via STS if role_arn and web_identity_token_file are specified
-# ## 2) Assumed credentials via STS if role_arn is specified
-# ## 3) explicit credentials from 'access_key' and 'secret_key'
-# ## 4) shared profile from 'profile'
-# ## 5) environment variables
-# ## 6) shared credentials file
-# ## 7) EC2 Instance Profile
-# #access_key = ""
-# #secret_key = ""
-# #token = ""
-# #role_arn = ""
-# #web_identity_token_file = ""
-# #role_session_name = ""
-# #profile = ""
-# #shared_credential_file = ""
-#
-# ## Endpoint to make request against, the correct endpoint is automatically
-# ## determined and this option should only be set if you wish to override the
-# ## default.
-# ## ex: endpoint_url = "http://localhost:8000"
-# # endpoint_url = ""
-#
-# ## Kinesis StreamName must exist prior to starting telegraf.
-# streamname = "StreamName"
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# data_format = "influx"
-#
-# ## debug will show upstream aws messages.
-# debug = false
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## The partition key can be calculated using one of several methods:
-# ##
-# ## Use a static value for all writes:
-# # [outputs.kinesis.partition]
-# # method = "static"
-# # key = "howdy"
-# #
-# ## Use a random partition key on each write:
-# # [outputs.kinesis.partition]
-# # method = "random"
-# #
-# ## Use the measurement name as the partition key:
-# # [outputs.kinesis.partition]
-# # method = "measurement"
-# #
-# ## Use the value of a tag for all writes, if the tag is not set the empty
-# ## default option will be used. When no default, defaults to "telegraf"
-# # [outputs.kinesis.partition]
-# # method = "tag"
-# # key = "host"
-# # default = "mykey"
-
-
-# # Configuration for Librato API to send metrics to.
-# [[outputs.librato]]
-# ## Librato API Docs
-# ## http://dev.librato.com/v1/metrics-authentication
-# ## Librato API user
-# ## Librato API token
-# api_token = "my-secret-token" # required.
-# ## Debug
-# # debug = false
-# ## Connection timeout.
-# # timeout = "5s"
-# ## Output source Template (same as graphite buckets)
-# ## see https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md#graphite
-# ## This template is used in librato's source (not metric's name)
-# template = "host"
-
-
-# # A plugin that can send metrics over HTTPs to Logz.io
-# [[outputs.logzio]]
-# ## Connection timeout, defaults to "5s" if not set.
-# # timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Logz.io account token
-# token = "your logz.io token" # required
-#
-# ## Use your listener URL for your Logz.io account region.
-# # url = "https://listener.logz.io:8071"
-
-
-# # A plugin that can transmit logs to Loki
-# [[outputs.loki]]
-# ## The domain of Loki
-# domain = "https://loki.domain.tld"
-#
-# ## Endpoint to write api
-# # endpoint = "/loki/api/v1/push"
-#
-# ## Connection timeout, defaults to "5s" if not set.
-# # timeout = "5s"
-#
-# ## Basic auth credential
-# # username = "loki"
-# # password = "pass"
-#
-# ## Additional HTTP headers
-# # http_headers = {"X-Scope-OrgID" = "1"}
-#
-# ## If the request must be gzip encoded
-# # gzip_request = false
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Sanitize Tag Names
-# ## If true, all tag names will have invalid characters replaced with
-# ## underscores that do not match the regex: ^[a-zA-Z_:][a-zA-Z0-9_:]*.
-# # sanitize_label_names = false
-#
-# ## Metric Name Label
-# ## Label to use for the metric name to when sending metrics. If set to an
-# ## empty string, this will not add the label. This is NOT suggested as there
-# ## is no way to differentiate between multiple metrics.
-# # metric_name_label = "__name"
-
-
-# # Sends metrics to Microsoft Fabric
-# [[outputs.microsoft_fabric]]
-# ## The URI property of the resource on Microsoft Fabric
-# connection_string = "https://trd-abcd.xx.kusto.fabric.microsoft.com;Database=kusto_eh;Table Name=telegraf_dump;Key=value"
-#
-# ## Client timeout
-# # timeout = "30s"
-
-
-# # A plugin that can transmit logs to mongodb
-# [[outputs.mongodb]]
-# # connection string examples for mongodb
-# dsn = "mongodb://localhost:27017"
-# # dsn = "mongodb://mongod1:27017,mongod2:27017,mongod3:27017/admin&replicaSet=myReplSet&w=1"
-#
-# # overrides serverSelectionTimeoutMS in dsn if set
-# # timeout = "30s"
-#
-# # default authentication, optional
-# # authentication = "NONE"
-#
-# # for SCRAM-SHA-256 authentication
-# # authentication = "SCRAM"
-# # username = "root"
-# # password = "***"
-#
-# # for x509 certificate authentication
-# # authentication = "X509"
-# # tls_ca = "ca.pem"
-# # tls_key = "client.pem"
-# # # tls_key_pwd = "changeme" # required for encrypted tls_key
-# # insecure_skip_verify = false
-#
-# # database to store measurements and time series collections
-# # database = "telegraf"
-#
-# # granularity can be seconds, minutes, or hours.
-# # configuring this value will be based on your input collection frequency.
-# # see https://docs.mongodb.com/manual/core/timeseries-collections/#create-a-time-series-collection
-# # granularity = "seconds"
-#
-# # optionally set a TTL to automatically expire documents from the measurement collections.
-# # ttl = "360h"
-
-
-# # Configuration for MQTT server to send metrics to
-# [[outputs.mqtt]]
-# ## MQTT Brokers
-# ## The list of brokers should only include the hostname or IP address and the
-# ## port to the broker. This should follow the format `[{scheme}://]{host}:{port}`. For
-# ## example, `localhost:1883` or `mqtt://localhost:1883`.
-# ## Scheme can be any of the following: tcp://, mqtt://, tls://, mqtts://
-# ## non-TLS and TLS servers can not be mix-and-matched.
-# servers = ["localhost:1883", ] # or ["mqtts://tls.example.com:1883"]
-#
-# ## Protocol can be `3.1.1` or `5`. Default is `3.1.1`
-# # protocol = "3.1.1"
-#
-# ## MQTT Topic for Producer Messages
-# ## MQTT outputs send metrics to this topic format:
-# ## prefix/{{ .Tag "host" }}/{{ .Name }}/{{ .Tag "tag_key" }}
-# ## (e.g. prefix/web01.example.com/mem/some_tag_value)
-# ## Each path segment accepts either a template placeholder, an environment variable, or a tag key
-# ## of the form `{{.Tag "tag_key_name"}}`. All the functions provided by the Sprig library
-# ## (http://masterminds.github.io/sprig/) are available. Empty path elements as well as special MQTT
-# ## characters (such as `+` or `#`) are invalid to form the topic name and will lead to an error.
-# ## In case a tag is missing in the metric, that path segment omitted for the final topic.
-# topic = 'telegraf/{{ .Tag "host" }}/{{ .Name }}'
-#
-# ## QoS policy for messages
-# ## The mqtt QoS policy for sending messages.
-# ## See https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com.ibm.mq.dev.doc/q029090_.htm
-# ## 0 = at most once
-# ## 1 = at least once
-# ## 2 = exactly once
-# # qos = 2
-#
-# ## Keep Alive
-# ## Defines the maximum length of time that the broker and client may not
-# ## communicate. Defaults to 0 which turns the feature off.
-# ##
-# ## For version v2.0.12 and later mosquitto there is a bug
-# ## (see https://github.com/eclipse/mosquitto/issues/2117), which requires
-# ## this to be non-zero. As a reference eclipse/paho.mqtt.golang defaults to 30.
-# # keep_alive = 0
-#
-# ## username and password to connect MQTT server.
-# # username = "telegraf"
-# # password = "metricsmetricsmetricsmetrics"
-#
-# ## client ID
-# ## The unique client id to connect MQTT server. If this parameter is not set
-# ## then a random ID is generated.
-# # client_id = ""
-#
-# ## Timeout for write operations. default: 5s
-# # timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## When true, metrics will be sent in one MQTT message per flush. Otherwise,
-# ## metrics are written one metric per MQTT message.
-# ## DEPRECATED: Use layout option instead
-# # batch = false
-#
-# ## When true, metric will have RETAIN flag set, making broker cache entries until someone
-# ## actually reads it
-# # retain = false
-#
-# ## Client trace messages
-# ## When set to true, and debug mode enabled in the agent settings, the MQTT
-# ## client's messages are included in telegraf logs. These messages are very
-# ## noisey, but essential for debugging issues.
-# # client_trace = false
-#
-# ## Layout of the topics published.
-# ## The following choices are available:
-# ## non-batch -- send individual messages, one for each metric
-# ## batch -- send all metric as a single message per MQTT topic
-# ## NOTE: The following options will ignore the 'data_format' option and send single values
-# ## field -- send individual messages for each field, appending its name to the metric topic
-# ## homie-v4 -- send metrics with fields and tags according to the 4.0.0 specs
-# ## see https://homieiot.github.io/specification/
-# # layout = "non-batch"
-#
-# ## HOMIE specific settings
-# ## The following options provide templates for setting the device name
-# ## and the node-ID for the topics. Both options are MANDATORY and can contain
-# ## {{ .Name }} (metric name), {{ .Tag "key"}} (tag reference to 'key') or
-# ## constant strings. The templates MAY NOT contain slashes!
-# # homie_device_name = ""
-# # homie_node_id = ""
-#
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# data_format = "influx"
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Optional MQTT 5 publish properties
-# ## These setting only apply if the "protocol" property is set to 5. This must
-# ## be defined at the end of the plugin settings, otherwise TOML will assume
-# ## anything else is part of this table. For more details on publish properties
-# ## see the spec:
-# ## https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901109
-# # [outputs.mqtt.v5]
-# # content_type = ""
-# # response_topic = ""
-# # message_expiry = "0s"
-# # topic_alias = 0
-# # [outputs.mqtt.v5.user_properties]
-# # "key1" = "value 1"
-# # "key2" = "value 2"
-
-
-# # Send telegraf measurements to NATS
-# [[outputs.nats]]
-# ## URLs of NATS servers
-# servers = ["nats://localhost:4222"]
-#
-# ## Optional client name
-# # name = ""
-#
-# ## Optional credentials
-# # username = ""
-# # password = ""
-#
-# ## Optional NATS 2.0 and NATS NGS compatible user credentials
-# # credentials = "/etc/telegraf/nats.creds"
-#
-# ## NATS subject for producer messages.
-# ## This field can be a static string or a Go template, see README for details.
-# ## Incompatible with `use_batch_format
-# subject = "telegraf"
-#
-# ## Use Transport Layer Security
-# # secure = false
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Use batch serialization instead of per metric. The batch format allows for the
-# ## production of batch output formats and may more efficiently encode and write metrics.
-# # use_batch_format = false
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# data_format = "influx"
-#
-# ## Jetstream specific configuration. If not nil, it will assume Jetstream context.
-# ## Since this is a table, it should be present at the end of the plugin section. Else you can use inline table format.
-# # [outputs.nats.jetstream]
-# ## Name of the stream, required when using jetstream.
-# # name = ""
-# ## List of subjects to register on the stream
-# # subjects = []
-#
-# ## Use asynchronous publishing for higher throughput, but note that it does not guarantee order within batches.
-# # async_publish = false
-#
-# ## Timeout for wating on acknowledgement on asynchronous publishing
-# ## String with valid units "ns", "us" (or "µs"), "ms", "s", "m", "h".
-# # async_ack_timeout = "5s"
-#
-# ## Full jetstream create stream config, refer: https://docs.nats.io/nats-concepts/jetstream/streams
-# # retention = "limits"
-# # max_consumers = -1
-# # max_msgs_per_subject = -1
-# # max_msgs = -1
-# # max_bytes = -1
-# # max_age = 0
-# # max_msg_size = -1
-# # storage = "file"
-# # discard = "old"
-# # num_replicas = 1
-# # duplicate_window = 120000000000
-# # sealed = false
-# # deny_delete = false
-# # deny_purge = false
-# # allow_rollup_hdrs = false
-# # allow_direct = true
-# # mirror_direct = false
-#
-# ## Disable creating the stream but assume the stream is managed externally
-# ## and already exists. This will make the plugin fail if the steam does not exist.
-# # disable_stream_creation = false
-
-
-# # Send aggregated metrics to Nebius.Cloud Monitoring
-# [[outputs.nebius_cloud_monitoring]]
-# ## Timeout for HTTP writes.
-# # timeout = "20s"
-#
-# ## Nebius.Cloud monitoring API endpoint. Normally should not be changed
-
-
-# # Send metrics to New Relic metrics endpoint
-# [[outputs.newrelic]]
-# ## The 'insights_key' parameter requires a NR license key.
-# ## New Relic recommends you create one
-# ## with a convenient name such as TELEGRAF_INSERT_KEY.
-# ## reference: https://docs.newrelic.com/docs/apis/intro-apis/new-relic-api-keys/#ingest-license-key
-# # insights_key = "New Relic License Key Here"
-#
-# ## Prefix to add to add to metric name for easy identification.
-# ## This is very useful if your metric names are ambiguous.
-# # metric_prefix = ""
-#
-# ## Timeout for writes to the New Relic API.
-# # timeout = "15s"
-#
-# ## HTTP Proxy override. If unset use values from the standard
-# ## proxy environment variables to determine proxy, if any.
-# # http_proxy = "http://corporate.proxy:3128"
-#
-# ## Metric URL override to enable geographic location endpoints.
-# # If not set use values from the standard
-# # metric_url = "https://metric-api.newrelic.com/metric/v1"
-
-
-# # Send telegraf measurements to NSQD
-# [[outputs.nsq]]
-# ## Location of nsqd instance listening on TCP
-# server = "localhost:4150"
-# ## NSQ topic for producer messages
-# topic = "telegraf"
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# data_format = "influx"
-
-
-# # Configuration for OpenSearch to send metrics to.
-# [[outputs.opensearch]]
-# ## URLs
-# ## The full HTTP endpoint URL for your OpenSearch instance. Multiple URLs can
-# ## be specified as part of the same cluster, but only one URLs is used to
-# ## write during each interval.
-# urls = ["http://node1.os.example.com:9200"]
-#
-# ## Index Name
-# ## Target index name for metrics (OpenSearch will create if it not exists).
-# ## This is a Golang template (see https://pkg.go.dev/text/template)
-# ## You can also specify
-# ## metric name (`{{.Name}}`), tag value (`{{.Tag "tag_name"}}`), field value (`{{.Field "field_name"}}`)
-# ## If the tag does not exist, the default tag value will be empty string "".
-# ## the timestamp (`{{.Time.Format "xxxxxxxxx"}}`).
-# ## For example: "telegraf-{{.Time.Format \"2006-01-02\"}}-{{.Tag \"host\"}}" would set it to telegraf-2023-07-27-HostName
-# index_name = ""
-#
-# ## Timeout
-# ## OpenSearch client timeout
-# # timeout = "5s"
-#
-# ## Sniffer
-# ## Set to true to ask OpenSearch a list of all cluster nodes,
-# ## thus it is not necessary to list all nodes in the urls config option
-# # enable_sniffer = false
-#
-# ## GZIP Compression
-# ## Set to true to enable gzip compression
-# # enable_gzip = false
-#
-# ## Health Check Interval
-# ## Set the interval to check if the OpenSearch nodes are available
-# ## Setting to "0s" will disable the health check (not recommended in production)
-# # health_check_interval = "10s"
-#
-# ## Set the timeout for periodic health checks.
-# # health_check_timeout = "1s"
-# ## HTTP basic authentication details.
-# # username = ""
-# # password = ""
-# ## HTTP bearer token authentication details
-# # auth_bearer_token = ""
-#
-# ## Optional TLS Config
-# ## Set to true/false to enforce TLS being enabled/disabled. If not set,
-# ## enable TLS only if any of the other options are specified.
-# # tls_enable =
-# ## Trusted root certificates for server
-# # tls_ca = "/path/to/cafile"
-# ## Used for TLS client certificate authentication
-# # tls_cert = "/path/to/certfile"
-# ## Used for TLS client certificate authentication
-# # tls_key = "/path/to/keyfile"
-# ## Send the specified TLS server name via SNI
-# # tls_server_name = "kubernetes.example.com"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Template Config
-# ## Manage templates
-# ## Set to true if you want telegraf to manage its index template.
-# ## If enabled it will create a recommended index template for telegraf indexes
-# # manage_template = true
-#
-# ## Template Name
-# ## The template name used for telegraf indexes
-# # template_name = "telegraf"
-#
-# ## Overwrite Templates
-# ## Set to true if you want telegraf to overwrite an existing template
-# # overwrite_template = false
-#
-# ## Document ID
-# ## If set to true a unique ID hash will be sent as
-# ## sha256(concat(timestamp,measurement,series-hash)) string. It will enable
-# ## data resend and update metric points avoiding duplicated metrics with
-# ## different id's
-# # force_document_id = false
-#
-# ## Value Handling
-# ## Specifies the handling of NaN and Inf values.
-# ## This option can have the following values:
-# ## none -- do not modify field-values (default); will produce an error
-# ## if NaNs or infs are encountered
-# ## drop -- drop fields containing NaNs or infs
-# ## replace -- replace with the value in "float_replacement_value" (default: 0.0)
-# ## NaNs and inf will be replaced with the given number, -inf with the negative of that number
-# # float_handling = "none"
-# # float_replacement_value = 0.0
-#
-# ## Pipeline Config
-# ## To use a ingest pipeline, set this to the name of the pipeline you want to use.
-# # use_pipeline = "my_pipeline"
-#
-# ## Pipeline Name
-# ## Additionally, you can specify a tag name using the notation (`{{.Tag "tag_name"}}`)
-# ## which will be used as the pipeline name (e.g. "{{.Tag "os_pipeline"}}").
-# ## If the tag does not exist, the default pipeline will be used as the pipeline.
-# ## If no default pipeline is set, no pipeline is used for the metric.
-# # default_pipeline = ""
-
-
-# # Send OpenTelemetry metrics over gRPC
-# [[outputs.opentelemetry]]
-# ## Override the default (localhost:4317) OpenTelemetry gRPC service
-# ## address:port
-# # service_address = "localhost:4317"
-#
-# ## Override the default (5s) request timeout
-# # timeout = "5s"
-#
-# ## Optional TLS Config.
-# ##
-# ## Root certificates for verifying server certificates encoded in PEM format.
-# # tls_ca = "/etc/telegraf/ca.pem"
-# ## The public and private key pairs for the client encoded in PEM format.
-# ## May contain intermediate certificates.
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS, but skip TLS chain and host verification.
-# # insecure_skip_verify = false
-# ## Send the specified TLS server name via SNI.
-# # tls_server_name = "foo.example.com"
-#
-# ## Override the default (gzip) compression used to send data.
-# ## Supports: "gzip", "none"
-# # compression = "gzip"
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Configuration options for the Coralogix dialect
-# ## Enable the following section of you use this plugin with a Coralogix endpoint
-# # [outputs.opentelemetry.coralogix]
-# # ## Your Coralogix private key (required).
-# # ## Please note that this is sensitive data!
-# # private_key = "your_coralogix_key"
-# #
-# # ## Application and subsystem names for the metrics (required)
-# # application = "$NAMESPACE"
-# # subsystem = "$HOSTNAME"
-#
-# ## Additional OpenTelemetry resource attributes
-# # [outputs.opentelemetry.attributes]
-# # "service.name" = "demo"
-#
-# ## Additional gRPC request metadata
-# # [outputs.opentelemetry.headers]
-# # key1 = "value1"
-
-
-# # Configuration for OpenTSDB server to send metrics to
-# [[outputs.opentsdb]]
-# ## prefix for metrics keys
-# prefix = "my.specific.prefix."
-#
-# ## DNS name of the OpenTSDB server
-# ## Using "opentsdb.example.com" or "tcp://opentsdb.example.com" will use the
-# ## telnet API. "http://opentsdb.example.com" will use the Http API.
-# host = "opentsdb.example.com"
-#
-# ## Port of the OpenTSDB server
-# port = 4242
-#
-# ## Number of data points to send to OpenTSDB in Http requests.
-# ## Not used with telnet API.
-# http_batch_size = 50
-#
-# ## URI Path for Http requests to OpenTSDB.
-# ## Used in cases where OpenTSDB is located behind a reverse proxy.
-# http_path = "/api/put"
-#
-# ## Debug true - Prints OpenTSDB communication
-# debug = false
-#
-# ## Separator separates measurement name from field
-# separator = "_"
-
-
-# # A plugin that writes metrics to parquet files
-# [[outputs.parquet]]
-# ## Directory to write parquet files in. If a file already exists the output
-# ## will attempt to continue using the existing file.
-# # directory = "."
-#
-# ## Files are rotated after the time interval specified. When set to 0 no time
-# ## based rotation is performed.
-# # rotation_interval = "0h"
-#
-# ## Timestamp field name
-# ## Field name to use to store the timestamp. If set to an empty string, then
-# ## the timestamp is omitted.
-# # timestamp_field_name = "timestamp"
-
-
-# # Publishes metrics to a postgresql database
-# [[outputs.postgresql]]
-# ## Specify connection address via the standard libpq connection string:
-# ## host=... user=... password=... sslmode=... dbname=...
-# ## Or a URL:
-# ## postgres://[user[:password]]@localhost[/dbname]?sslmode=[disable|verify-ca|verify-full]
-# ## See https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-CONNSTRING
-# ##
-# ## All connection parameters are optional. Environment vars are also supported.
-# ## e.g. PGPASSWORD, PGHOST, PGUSER, PGDATABASE
-# ## All supported vars can be found here:
-# ## https://www.postgresql.org/docs/current/libpq-envars.html
-# ##
-# ## Non-standard parameters:
-# ## pool_max_conns (default: 1) - Maximum size of connection pool for parallel (per-batch per-table) inserts.
-# ## pool_min_conns (default: 0) - Minimum size of connection pool.
-# ## pool_max_conn_lifetime (default: 0s) - Maximum connection age before closing.
-# ## pool_max_conn_idle_time (default: 0s) - Maximum idle time of a connection before closing.
-# ## pool_health_check_period (default: 0s) - Duration between health checks on idle connections.
-# # connection = ""
-#
-# ## Postgres schema to use.
-# # schema = "public"
-#
-# ## Store tags as foreign keys in the metrics table. Default is false.
-# # tags_as_foreign_keys = false
-#
-# ## Suffix to append to table name (measurement name) for the foreign tag table.
-# # tag_table_suffix = "_tag"
-#
-# ## Deny inserting metrics if the foreign tag can't be inserted.
-# # foreign_tag_constraint = false
-#
-# ## Store all tags as a JSONB object in a single 'tags' column.
-# # tags_as_jsonb = false
-#
-# ## Store all fields as a JSONB object in a single 'fields' column.
-# # fields_as_jsonb = false
-#
-# ## Name of the timestamp column
-# ## NOTE: Some tools (e.g. Grafana) require the default name so be careful!
-# # timestamp_column_name = "time"
-#
-# ## Type of the timestamp column
-# ## Currently, "timestamp without time zone" and "timestamp with time zone"
-# ## are supported
-# # timestamp_column_type = "timestamp without time zone"
-#
-# ## Templated statements to execute when creating a new table.
-# # create_templates = [
-# # '''CREATE TABLE {{ .table }} ({{ .columns }})''',
-# # ]
-#
-# ## Templated statements to execute when adding columns to a table.
-# ## Set to an empty list to disable. Points containing tags for which there is
-# ## no column will be skipped. Points containing fields for which there is no
-# ## column will have the field omitted.
-# # add_column_templates = [
-# # '''ALTER TABLE {{ .table }} ADD COLUMN IF NOT EXISTS {{ .columns|join ", ADD COLUMN IF NOT EXISTS " }}''',
-# # ]
-#
-# ## Templated statements to execute when creating a new tag table.
-# # tag_table_create_templates = [
-# # '''CREATE TABLE {{ .table }} ({{ .columns }}, PRIMARY KEY (tag_id))''',
-# # ]
-#
-# ## Templated statements to execute when adding columns to a tag table.
-# ## Set to an empty list to disable. Points containing tags for which there is
-# ## no column will be skipped.
-# # tag_table_add_column_templates = [
-# # '''ALTER TABLE {{ .table }} ADD COLUMN IF NOT EXISTS {{ .columns|join ", ADD COLUMN IF NOT EXISTS " }}''',
-# # ]
-#
-# ## The postgres data type to use for storing unsigned 64-bit integer values
-# ## (Postgres does not have a native unsigned 64-bit integer type).
-# ## The value can be one of:
-# ## numeric - Uses the PostgreSQL "numeric" data type.
-# ## uint8 - Requires pguint extension (https://github.com/petere/pguint)
-# # uint64_type = "numeric"
-#
-# ## When using pool_max_conns > 1, and a temporary error occurs, the query is
-# ## retried with an incremental backoff. This controls the maximum duration.
-# # retry_max_backoff = "15s"
-#
-# ## Approximate number of tag IDs to store in in-memory cache (when using
-# ## tags_as_foreign_keys). This is an optimization to skip inserting known
-# ## tag IDs. Each entry consumes approximately 34 bytes of memory.
-# # tag_cache_size = 100000
-#
-# ## Cut column names at the given length to not exceed PostgreSQL's
-# ## 'identifier length' limit (default: no limit)
-# ## (see https://www.postgresql.org/docs/current/limits.html)
-# ## Be careful to not create duplicate column names!
-# # column_name_length_limit = 0
-#
-# ## Enable & set the log level for the Postgres driver.
-# # log_level = "warn" # trace, debug, info, warn, error, none
-
-
-# # Configuration for the Prometheus client to spawn
-# [[outputs.prometheus_client]]
-# ## Address to listen on.
-# ## ex:
-# ## listen = ":9273"
-# ## listen = "vsock://:9273"
-# listen = ":9273"
-#
-# ## Maximum duration before timing out read of the request
-# # read_timeout = "10s"
-# ## Maximum duration before timing out write of the response
-# # write_timeout = "10s"
-#
-# ## Metric version controls the mapping from Prometheus metrics into Telegraf metrics.
-# ## See "Metric Format Configuration" in plugins/inputs/prometheus/README.md for details.
-# ## Valid options: 1, 2
-# # metric_version = 1
-#
-# ## Use HTTP Basic Authentication.
-# # basic_username = "Foo"
-# # basic_password = "Bar"
-#
-# ## If set, the IP Ranges which are allowed to access metrics.
-# ## ex: ip_range = ["192.168.0.0/24", "192.168.1.0/30"]
-# # ip_range = []
-#
-# ## Path to publish the metrics on.
-# # path = "/metrics"
-#
-# ## Expiration interval for each metric. 0 == no expiration
-# # expiration_interval = "60s"
-#
-# ## Collectors to enable, valid entries are "gocollector" and "process".
-# ## If unset, both are enabled.
-# # collectors_exclude = ["gocollector", "process"]
-#
-# ## Send string metrics as Prometheus labels.
-# ## Unless set to false all string metrics will be sent as labels.
-# # string_as_label = true
-#
-# ## If set, enable TLS with the given certificate.
-# # tls_cert = "/etc/ssl/telegraf.crt"
-# # tls_key = "/etc/ssl/telegraf.key"
-#
-# ## Set one or more allowed client CA certificate file names to
-# ## enable mutually authenticated TLS connections
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Export metric collection time.
-# # export_timestamp = false
-#
-# ## Set custom headers for HTTP responses.
-# # http_headers = {"X-Special-Header" = "Special-Value"}
-#
-# ## Specify the metric type explicitly.
-# ## This overrides the metric-type of the Telegraf metric. Globbing is allowed.
-# # [outputs.prometheus_client.metric_types]
-# # counter = []
-# # gauge = []
-
-
-# # Send metrics to a Quix data processing pipeline
-# [[outputs.quix]]
-# ## Endpoint for providing the configuration
-# # url = "https://portal-api.platform.quix.io"
-#
-# ## Workspace and topics to send the metrics to
-# workspace = "your_workspace"
-# topic = "your_topic"
-#
-# ## Authentication token created in Quix
-# token = "your_auth_token"
-#
-# ## Amount of time allowed to complete the HTTP request for fetching the config
-
-
-# # Publishes metrics to a redis timeseries server
-# [[outputs.redistimeseries]]
-# ## The address of the RedisTimeSeries server.
-# address = "127.0.0.1:6379"
-#
-# ## Redis ACL credentials
-# # username = ""
-# # password = ""
-# # database = 0
-#
-# ## Timeout for operations such as ping or sending metrics
-# # timeout = "10s"
-#
-# ## Enable attempt to convert string fields to numeric values
-# ## If "false" or in case the string value cannot be converted the string
-# ## field will be dropped.
-# # convert_string_fields = true
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# # insecure_skip_verify = false
-
-
-# # Send telegraf metrics to file(s) in a remote filesystem
-# [[outputs.remotefile]]
-# ## Remote location according to https://rclone.org/#providers
-# ## Check the backend configuration options and specify them in
-# ## <backend type>[,<param1>=<value1>[,...,<paramN>=<valueN>]]:[root]
-# ## for example:
-# ## remote = 's3,provider=AWS,access_key_id=...,secret_access_key=...,session_token=...,region=us-east-1:mybucket'
-# ## By default, remote is the local current directory
-# # remote = "local:"
-#
-# ## Files to write in the remote location
-# ## Each file can be a Golang template for generating the filename from metrics.
-# ## See https://pkg.go.dev/text/template for a reference and use the metric
-# ## name (`{{.Name}}`), tag values (`{{.Tag "name"}}`), field values
-# ## (`{{.Field "name"}}`) or the metric time (`{{.Time}}) to derive the
-# ## filename.
-# ## The 'files' setting may contain directories relative to the root path
-# ## defined in 'remote'.
-# files = ['{{.Name}}-{{.Time.Format "2006-01-02"}}']
-#
-# ## Use batch serialization format instead of line based delimiting.
-# ## The batch format allows for the production of non-line-based output formats
-# ## and may more efficiently encode metrics.
-# # use_batch_format = false
-#
-# ## Cache settings
-# ## Time to wait for all writes to complete on shutdown of the plugin.
-# # final_write_timeout = "10s"
-#
-# ## Time to wait between writing to a file and uploading to the remote location
-# # cache_write_back = "5s"
-#
-# ## Maximum size of the cache on disk (infinite by default)
-# # cache_max_size = -1
-#
-# ## Forget files after not being touched for longer than the given time
-# ## This is useful to prevent memory leaks when using time-based filenames
-# ## as it allows internal structures to be cleaned up.
-# ## Note: When writing to a file after is has been forgotten, the file is
-# ## treated as a new file which might cause file-headers to be appended
-# ## again by certain serializers like CSV.
-# ## By default files will be kept indefinitely.
-# # forget_files_after = "0s"
-#
-# ## Data format to output.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# data_format = "influx"
-
-
-# # Configuration for Riemann to send metrics to
-# [[outputs.riemann]]
-# ## The full TCP or UDP URL of the Riemann server
-# url = "tcp://localhost:5555"
-#
-# ## Riemann event TTL, floating-point time in seconds.
-# ## Defines how long that an event is considered valid for in Riemann
-# # ttl = 30.0
-#
-# ## Separator to use between measurement and field name in Riemann service name
-# ## This does not have any effect if 'measurement_as_attribute' is set to 'true'
-# separator = "/"
-#
-# ## Set measurement name as Riemann attribute 'measurement', instead of prepending it to the Riemann service name
-# # measurement_as_attribute = false
-#
-# ## Send string metrics as Riemann event states.
-# ## Unless enabled all string metrics will be ignored
-# # string_as_state = false
-#
-# ## A list of tag keys whose values get sent as Riemann tags.
-# ## If empty, all Telegraf tag values will be sent as tags
-# # tag_keys = ["telegraf","custom_tag"]
-#
-# ## Additional Riemann tags to send.
-# # tags = ["telegraf-output"]
-#
-# ## Description for Riemann event
-# # description_text = "metrics collected from telegraf"
-#
-# ## Riemann client write timeout, defaults to "5s" if not set.
-# # timeout = "5s"
-
-
-# # Send aggregate metrics to Sensu Monitor
-# [[outputs.sensu]]
-# ## BACKEND API URL is the Sensu Backend API root URL to send metrics to
-# ## (protocol, host, and port only). The output plugin will automatically
-# ## append the corresponding backend API path
-# ## /api/core/v2/namespaces/:entity_namespace/events/:entity_name/:check_name).
-# ##
-# ## Backend Events API reference:
-# ## https://docs.sensu.io/sensu-go/latest/api/events/
-# ##
-# ## AGENT API URL is the Sensu Agent API root URL to send metrics to
-# ## (protocol, host, and port only). The output plugin will automatically
-# ## append the correspeonding agent API path (/events).
-# ##
-# ## Agent API Events API reference:
-# ## https://docs.sensu.io/sensu-go/latest/api/events/
-# ##
-# ## NOTE: if backend_api_url and agent_api_url and api_key are set, the output
-# ## plugin will use backend_api_url. If backend_api_url and agent_api_url are
-# ## not provided, the output plugin will default to use an agent_api_url of
-# ## http://127.0.0.1:3031
-# ##
-# # backend_api_url = "http://127.0.0.1:8080"
-# # agent_api_url = "http://127.0.0.1:3031"
-#
-# ## API KEY is the Sensu Backend API token
-# ## Generate a new API token via:
-# ##
-# ## $ sensuctl cluster-role create telegraf --verb create --resource events,entities
-# ## $ sensuctl cluster-role-binding create telegraf --cluster-role telegraf --group telegraf
-# ## $ sensuctl user create telegraf --group telegraf --password REDACTED
-# ## $ sensuctl api-key grant telegraf
-# ##
-# ## For more information on Sensu RBAC profiles & API tokens, please visit:
-# ## - https://docs.sensu.io/sensu-go/latest/reference/rbac/
-# ## - https://docs.sensu.io/sensu-go/latest/reference/apikeys/
-# ##
-# # api_key = "${SENSU_API_KEY}"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Timeout for HTTP message
-# # timeout = "5s"
-#
-# ## HTTP Content-Encoding for write request body, can be set to "gzip" to
-# ## compress body or "identity" to apply no encoding.
-# # content_encoding = "identity"
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Sensu Event details
-# ##
-# ## Below are the event details to be sent to Sensu. The main portions of the
-# ## event are the check, entity, and metrics specifications. For more information
-# ## on Sensu events and its components, please visit:
-# ## - Events - https://docs.sensu.io/sensu-go/latest/reference/events
-# ## - Checks - https://docs.sensu.io/sensu-go/latest/reference/checks
-# ## - Entities - https://docs.sensu.io/sensu-go/latest/reference/entities
-# ## - Metrics - https://docs.sensu.io/sensu-go/latest/reference/events#metrics
-# ##
-# ## Check specification
-# ## The check name is the name to give the Sensu check associated with the event
-# ## created. This maps to check.metadata.name in the event.
-# [outputs.sensu.check]
-# name = "telegraf"
-#
-# ## Entity specification
-# ## Configure the entity name and namespace, if necessary. This will be part of
-# ## the entity.metadata in the event.
-# ##
-# ## NOTE: if the output plugin is configured to send events to a
-# ## backend_api_url and entity_name is not set, the value returned by
-# ## os.Hostname() will be used; if the output plugin is configured to send
-# ## events to an agent_api_url, entity_name and entity_namespace are not used.
-# # [outputs.sensu.entity]
-# # name = "server-01"
-# # namespace = "default"
-#
-# ## Metrics specification
-# ## Configure the tags for the metrics that are sent as part of the Sensu event
-# # [outputs.sensu.tags]
-# # source = "telegraf"
-#
-# ## Configure the handler(s) for processing the provided metrics
-# # [outputs.sensu.metrics]
-# # handlers = ["influxdb","elasticsearch"]
-
-
-# # Send metrics and events to SignalFx
-# [[outputs.signalfx]]
-# ## SignalFx Org Access Token
-# access_token = "my-secret-token"
-#
-# ## The SignalFx realm that your organization resides in
-# signalfx_realm = "us9" # Required if ingest_url is not set
-#
-# ## You can optionally provide a custom ingest url instead of the
-# ## signalfx_realm option above if you are using a gateway or proxy
-# ## instance. This option takes precedence over signalfx_realm.
-# ingest_url = "https://my-custom-ingest/"
-#
-# ## Event typed metrics are omitted by default,
-# ## If you require an event typed metric you must specify the
-# ## metric name in the following list.
-# included_event_names = ["plugin.metric_name"]
-
-
-# # Generic socket writer capable of handling multiple socket types.
-# [[outputs.socket_writer]]
-# ## URL to connect to
-# # address = "tcp://127.0.0.1:8094"
-# # address = "tcp://example.com:http"
-# # address = "tcp4://127.0.0.1:8094"
-# # address = "tcp6://127.0.0.1:8094"
-# # address = "tcp6://[2001:db8::1]:8094"
-# # address = "udp://127.0.0.1:8094"
-# # address = "udp4://127.0.0.1:8094"
-# # address = "udp6://127.0.0.1:8094"
-# # address = "unix:///tmp/telegraf.sock"
-# # address = "unixgram:///tmp/telegraf.sock"
-# # address = "vsock://cid:port"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Period between keep alive probes.
-# ## Only applies to TCP sockets.
-# ## 0 disables keep alive probes.
-# ## Defaults to the OS configuration.
-# # keep_alive_period = "5m"
-#
-# ## Content encoding for message payloads, can be set to "gzip" or to
-# ## "identity" to apply no encoding.
-# ##
-# # content_encoding = "identity"
-#
-# ## Data format to generate.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# # data_format = "influx"
-
-
-# # Save metrics to an SQL Database
-# [[outputs.sql]]
-# ## Database driver
-# ## Valid options: mssql (Microsoft SQL Server), mysql (MySQL), pgx (Postgres),
-# ## sqlite (SQLite3), snowflake (snowflake.com) clickhouse (ClickHouse)
-# driver = ""
-#
-# ## Data source name
-# ## The format of the data source name is different for each database driver.
-# ## See the plugin readme for details.
-# data_source_name = ""
-#
-# ## Timestamp column name, set to empty to ignore the timestamp
-# # timestamp_column = "timestamp"
-#
-# ## Table creation template
-# ## Available template variables:
-# ## {TABLE} - table name as a quoted identifier
-# ## {TABLELITERAL} - table name as a quoted string literal
-# ## {COLUMNS} - column definitions (list of quoted identifiers and types)
-# ## {TAG_COLUMN_NAMES} - tag column definitions (list of quoted identifiers)
-# ## {TIMESTAMP_COLUMN_NAME} - the name of the time stamp column, as configured above
-# # table_template = "CREATE TABLE {TABLE}({COLUMNS})"
-# ## NOTE: For the clickhouse driver the default is:
-# # table_template = "CREATE TABLE {TABLE}({COLUMNS}) ORDER BY ({TAG_COLUMN_NAMES}, {TIMESTAMP_COLUMN_NAME})"
-#
-# ## Table existence check template
-# ## Available template variables:
-# ## {TABLE} - tablename as a quoted identifier
-# # table_exists_template = "SELECT 1 FROM {TABLE} LIMIT 1"
-#
-# ## Table update template, available template variables:
-# ## {TABLE} - table name as a quoted identifier
-# ## {COLUMN} - column definition (quoted identifier and type)
-# ## NOTE: Ensure the user (you're using to write to the database) has necessary permissions
-# ##
-# ## Use the following setting for automatically adding columns:
-# ## table_update_template = "ALTER TABLE {TABLE} ADD COLUMN {COLUMN}"
-# # table_update_template = ""
-#
-# ## Initialization SQL
-# # init_sql = ""
-#
-# ## Send metrics with the same columns and the same table as batches using prepared statements
-# # batch_transactions = false
-#
-# ## Maximum amount of time a connection may be idle. "0s" means connections are
-# ## never closed due to idle time.
-# # connection_max_idle_time = "0s"
-#
-# ## Maximum amount of time a connection may be reused. "0s" means connections
-# ## are never closed due to age.
-# # connection_max_lifetime = "0s"
-#
-# ## Maximum number of connections in the idle connection pool. 0 means unlimited.
-# # connection_max_idle = 2
-#
-# ## Maximum number of open connections to the database. 0 means unlimited.
-# # connection_max_open = 0
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Metric type to SQL type conversion
-# ## The values on the left are the data types Telegraf has and the values on
-# ## the right are the data types Telegraf will use when sending to a database.
-# ##
-# ## The database values used must be data types the destination database
-# ## understands. It is up to the user to ensure that the selected data type is
-# ## available in the database they are using. Refer to your database
-# ## documentation for what data types are available and supported.
-# #[outputs.sql.convert]
-# # integer = "INT"
-# # real = "DOUBLE"
-# # text = "TEXT"
-# # timestamp = "TIMESTAMP"
-# # defaultvalue = "TEXT"
-# # unsigned = "UNSIGNED"
-# # bool = "BOOL"
-# # ## This setting controls the behavior of the unsigned value. By default the
-# # ## setting will take the integer value and append the unsigned value to it. The other
-# # ## option is "literal", which will use the actual value the user provides to
-# # ## the unsigned option. This is useful for a database like ClickHouse where
-# # ## the unsigned value should use a value like "uint64".
-# # # conversion_style = "unsigned_suffix"
-
-
-# # Configuration for Google Cloud Stackdriver to send metrics to
-# [[outputs.stackdriver]]
-# ## GCP Project
-# project = "erudite-bloom-151019"
-#
-# ## Quota Project
-# ## Specifies the Google Cloud project that should be billed for metric ingestion.
-# ## If omitted, the quota is charged to the service account’s default project.
-# ## This is useful when sending metrics to multiple projects using a single service account.
-# ## The caller must have the `serviceusage.services.use` permission on the specified project.
-# # quota_project = ""
-#
-# ## The namespace for the metric descriptor
-# ## This is optional and users are encouraged to set the namespace as a
-# ## resource label instead. If omitted it is not included in the metric name.
-# namespace = "telegraf"
-#
-# ## Metric Type Prefix
-# ## The DNS name used with the metric type as a prefix.
-# # metric_type_prefix = "custom.googleapis.com"
-#
-# ## Metric Name Format
-# ## Specifies the layout of the metric name, choose from:
-# ## * path: 'metric_type_prefix_namespace_name_key'
-# ## * official: 'metric_type_prefix/namespace_name_key/kind'
-# # metric_name_format = "path"
-#
-# ## Metric Data Type
-# ## By default, telegraf will use whatever type the metric comes in as.
-# ## However, for some use cases, forcing int64, may be preferred for values:
-# ## * source: use whatever was passed in
-# ## * double: preferred datatype to allow queries by PromQL.
-# # metric_data_type = "source"
-#
-# ## Tags as resource labels
-# ## Tags defined in this option, when they exist, are added as a resource
-# ## label and not included as a metric label. The values from tags override
-# ## the values defined under the resource_labels config options.
-# # tags_as_resource_label = []
-#
-# ## Custom resource type
-# # resource_type = "generic_node"
-#
-# ## Override metric type by metric name
-# ## Metric names matching the values here, globbing supported, will have the
-# ## metric type set to the corresponding type.
-# # metric_counter = []
-# # metric_gauge = []
-# # metric_histogram = []
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Additional resource labels
-# # [outputs.stackdriver.resource_labels]
-# # node_id = "$HOSTNAME"
-# # namespace = "myapp"
-# # location = "eu-north0"
-
-
-# # Configuration for active mq with stomp protocol to send metrics to
-# [[outputs.stomp]]
-# host = "localhost:61613"
-#
-# ## Queue name for producer messages
-# queueName = "telegraf"
-#
-# ## Username and password if required by the Active MQ server.
-# # username = ""
-# # password = ""
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Data format to output.
-# data_format = "json"
-
-
-# # A plugin that can send metrics to Sumo Logic HTTP metric collector.
-# [[outputs.sumologic]]
-# ## Unique URL generated for your HTTP Metrics Source.
-# ## This is the address to send metrics to.
-# # url = "https://events.sumologic.net/receiver/v1/http/<UniqueHTTPCollectorCode>"
-#
-# ## Data format to be used for sending metrics.
-# ## This will set the "Content-Type" header accordingly.
-# ## Currently supported formats:
-# ## * graphite - for Content-Type of application/vnd.sumologic.graphite
-# ## * carbon2 - for Content-Type of application/vnd.sumologic.carbon2
-# ## * prometheus - for Content-Type of application/vnd.sumologic.prometheus
-# ##
-# ## More information can be found at:
-# ## https://help.sumologic.com/03Send-Data/Sources/02Sources-for-Hosted-Collectors/HTTP-Source/Upload-Metrics-to-an-HTTP-Source#content-type-headers-for-metrics
-# ##
-# ## NOTE:
-# ## When unset, telegraf will by default use the influx serializer which is currently unsupported
-# ## in HTTP Source.
-# data_format = "carbon2"
-#
-# ## Timeout used for HTTP request
-# # timeout = "5s"
-#
-# ## Max HTTP request body size in bytes before compression (if applied).
-# ## By default 1MB is recommended.
-# ## NOTE:
-# ## Bear in mind that in some serializer a metric even though serialized to multiple
-# ## lines cannot be split any further so setting this very low might not work
-# ## as expected.
-# # max_request_body_size = 1000000
-#
-# ## Additional, Sumo specific options.
-# ## Full list can be found here:
-# ## https://help.sumologic.com/03Send-Data/Sources/02Sources-for-Hosted-Collectors/HTTP-Source/Upload-Metrics-to-an-HTTP-Source#supported-http-headers
-#
-# ## Desired source name.
-# ## Useful if you want to override the source name configured for the source.
-# # source_name = ""
-#
-# ## Desired host name.
-# ## Useful if you want to override the source host configured for the source.
-# # source_host = ""
-#
-# ## Desired source category.
-# ## Useful if you want to override the source category configured for the source.
-# # source_category = ""
-#
-# ## Comma-separated key=value list of dimensions to apply to every metric.
-# ## Custom dimensions will allow you to query your metrics at a more granular level.
-# # dimensions = ""
-
-
-# # Configuration for Syslog server to send metrics to
-# [[outputs.syslog]]
-# ## URL to connect to
-# ## ex: address = "tcp://127.0.0.1:8094"
-# ## ex: address = "tcp4://127.0.0.1:8094"
-# ## ex: address = "tcp6://127.0.0.1:8094"
-# ## ex: address = "tcp6://[2001:db8::1]:8094"
-# ## ex: address = "udp://127.0.0.1:8094"
-# ## ex: address = "udp4://127.0.0.1:8094"
-# ## ex: address = "udp6://127.0.0.1:8094"
-# address = "tcp://127.0.0.1:8094"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Period between keep alive probes.
-# ## Only applies to TCP sockets.
-# ## 0 disables keep alive probes.
-# ## Defaults to the OS configuration.
-# # keep_alive_period = "5m"
-#
-# ## The framing technique with which it is expected that messages are
-# ## transported (default = "octet-counting"). Whether the messages come
-# ## using the octet-counting (RFC5425#section-4.3.1, RFC6587#section-3.4.1),
-# ## or the non-transparent framing technique (RFC6587#section-3.4.2). Must
-# ## be one of "octet-counting", "non-transparent".
-# # framing = "octet-counting"
-#
-# ## The trailer to be expected in case of non-transparent framing (default = "LF").
-# ## Must be one of "LF", or "NUL".
-# # trailer = "LF"
-#
-# ## SD-PARAMs settings
-# ## Syslog messages can contain key/value pairs within zero or more
-# ## structured data sections. For each unrecognized metric tag/field a
-# ## SD-PARAMS is created.
-# ##
-# ## Example:
-# ## [[outputs.syslog]]
-# ## sdparam_separator = "_"
-# ## default_sdid = "default@32473"
-# ## sdids = ["foo@123", "bar@456"]
-# ##
-# ## input => xyzzy,x=y foo@123_value=42,bar@456_value2=84,something_else=1
-# ## output (structured data only) => [foo@123 value=42][bar@456 value2=84][default@32473 something_else=1 x=y]
-#
-# ## SD-PARAMs separator between the sdid and tag/field key (default = "_")
-# # sdparam_separator = "_"
-#
-# ## Default sdid used for tags/fields that don't contain a prefix defined in
-# ## the explicit sdids setting below If no default is specified, no SD-PARAMs
-# ## will be used for unrecognized field.
-# # default_sdid = "default@32473"
-#
-# ## List of explicit prefixes to extract from tag/field keys and use as the
-# ## SDID, if they match (see above example for more details):
-# # sdids = ["foo@123", "bar@456"]
-#
-# ## Default severity value. Severity and Facility are used to calculate the
-# ## message PRI value (RFC5424#section-6.2.1). Used when no metric field
-# ## with key "severity_code" is defined. If unset, 5 (notice) is the default
-# # default_severity_code = 5
-#
-# ## Default facility value. Facility and Severity are used to calculate the
-# ## message PRI value (RFC5424#section-6.2.1). Used when no metric field with
-# ## key "facility_code" is defined. If unset, 1 (user-level) is the default
-# # default_facility_code = 1
-#
-# ## Default APP-NAME value (RFC5424#section-6.2.5)
-# ## Used when no metric tag with key "appname" is defined.
-# ## If unset, "Telegraf" is the default
-# # default_appname = "Telegraf"
-
-
-# # Configuration for sending metrics to Amazon Timestream.
-# [[outputs.timestream]]
-# ## Amazon Region
-# region = "us-east-1"
-#
-# ## Amazon Credentials
-# ## Credentials are loaded in the following order:
-# ## 1) Web identity provider credentials via STS if role_arn and
-# ## web_identity_token_file are specified
-# ## 2) Assumed credentials via STS if role_arn is specified
-# ## 3) explicit credentials from 'access_key' and 'secret_key'
-# ## 4) shared profile from 'profile'
-# ## 5) environment variables
-# ## 6) shared credentials file
-# ## 7) EC2 Instance Profile
-# #access_key = ""
-# #secret_key = ""
-# #token = ""
-# #role_arn = ""
-# #web_identity_token_file = ""
-# #role_session_name = ""
-# #profile = ""
-# #shared_credential_file = ""
-#
-# ## Endpoint to make request against, the correct endpoint is automatically
-# ## determined and this option should only be set if you wish to override the
-# ## default.
-# ## ex: endpoint_url = "http://localhost:8000"
-# # endpoint_url = ""
-#
-# ## Timestream database where the metrics will be inserted.
-# ## The database must exist prior to starting Telegraf.
-# database_name = "yourDatabaseNameHere"
-#
-# ## Specifies if the plugin should describe the Timestream database upon
-# ## starting to validate if it has access, necessary permissions, connection,
-# ## etc., as a safety check. If the describe operation fails, the plugin will
-# ## not start and therefore the Telegraf agent will not start.
-# describe_database_on_start = false
-#
-# ## Specifies how the data is organized in Timestream.
-# ## Valid values are: single-table, multi-table.
-# ## When mapping_mode is set to single-table, all of the data is stored in a
-# ## single table. When mapping_mode is set to multi-table, the data is
-# ## organized and stored in multiple tables. The default is multi-table.
-# mapping_mode = "multi-table"
-#
-# ## Specifies if the plugin should create the table, if it doesn't exist.
-# create_table_if_not_exists = true
-#
-# ## Specifies the Timestream table magnetic store retention period in days.
-# ## Check Timestream documentation for more details.
-# ## NOTE: This property is valid when create_table_if_not_exists = true.
-# create_table_magnetic_store_retention_period_in_days = 365
-#
-# ## Specifies the Timestream table memory store retention period in hours.
-# ## Check Timestream documentation for more details.
-# ## NOTE: This property is valid when create_table_if_not_exists = true.
-# create_table_memory_store_retention_period_in_hours = 24
-#
-# ## Specifies how the data is written into Timestream.
-# ## Valid values are: true, false
-# ## When use_multi_measure_records is set to true, all of the tags and fields
-# ## are stored as a single row in a Timestream table.
-# ## When use_multi_measure_record is set to false, Timestream stores each field
-# ## in a separate table row, thereby storing the tags multiple times (once for
-# ## each field). The recommended setting is true. The default is false.
-# use_multi_measure_records = "false"
-#
-# ## Specifies the measure_name to use when sending multi-measure records.
-# ## NOTE: This property is valid when use_multi_measure_records=true and
-# ## mapping_mode=multi-table
-# measure_name_for_multi_measure_records = "telegraf_measure"
-#
-# ## Specifies the name of the table to write data into
-# ## NOTE: This property is valid when mapping_mode=single-table.
-# # single_table_name = ""
-#
-# ## Specifies the name of dimension when all of the data is being stored in a
-# ## single table and the measurement name is transformed into the dimension
-# ## value (see Mapping data from Influx to Timestream for details)
-# ## NOTE: This property is valid when mapping_mode=single-table.
-# # single_table_dimension_name_for_telegraf_measurement_name = "namespace"
-#
-# ## Only valid and optional if create_table_if_not_exists = true
-# ## Specifies the Timestream table tags.
-# ## Check Timestream documentation for more details
-# # create_table_tags = { "foo" = "bar", "environment" = "dev"}
-#
-# ## Specify the maximum number of parallel go routines to ingest/write data
-# ## If not specified, defaulted to 1 go routines
-# max_write_go_routines = 25
-
-
-# # Write metrics to Warp 10
-# [[outputs.warp10]]
-# # Prefix to add to the measurement.
-# prefix = "telegraf."
-#
-# # URL of the Warp 10 server
-# warp_url = "http://localhost:8080"
-#
-# # Write token to access your app on warp 10
-# token = "Token"
-#
-# # Warp 10 query timeout
-# # timeout = "15s"
-#
-# ## Print Warp 10 error body
-# # print_error_body = false
-#
-# ## Max string error size
-# # max_string_error_size = 511
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# [[outputs.wavefront]]
-# ## URL for Wavefront API or Wavefront proxy instance
-# ## Direct Ingestion via Wavefront API requires authentication. See below.
-# url = "https://metrics.wavefront.com"
-#
-# ## Maximum number of metrics to send per HTTP request. This value should be
-# ## higher than the `metric_batch_size`. Values higher than 40,000 are not
-# ## recommended.
-# # http_maximum_batch_size = 10000
-#
-# ## Prefix for metrics keys
-# # prefix = "my.specific.prefix."
-#
-# ## Use "value" for name of simple fields
-# # simple_fields = false
-#
-# ## character to use between metric and field name
-# # metric_separator = "."
-#
-# ## Convert metric name paths to use metricSeparator character
-# ## When true will convert all _ (underscore) characters in final metric name.
-# # convert_paths = true
-#
-# ## Use Strict rules to sanitize metric and tag names from invalid characters
-# ## When enabled forward slash (/) and comma (,) will be accepted
-# # use_strict = false
-#
-# ## Use Regex to sanitize metric and tag names from invalid characters
-# ## Regex is more thorough, but significantly slower.
-# # use_regex = false
-#
-# ## Tags to use as the source name for Wavefront ("host" if none is found)
-# # source_override = ["hostname", "address", "agent_host", "node_host"]
-#
-# ## Convert boolean values to numeric values, with false -> 0.0 and true -> 1.0
-# # convert_bool = true
-#
-# ## Truncate metric tags to a total of 254 characters for the tag name value
-# ## Wavefront will reject any data point exceeding this limit if not truncated
-# ## Defaults to 'false' to provide backwards compatibility.
-# # truncate_tags = false
-#
-# ## Flush the internal buffers after each batch. This effectively bypasses the
-# ## background sending of metrics normally done by the Wavefront SDK. This can
-# ## be used if you are experiencing buffer overruns. The sending of metrics
-# ## will block for a longer time, but this will be handled gracefully by
-# ## internal buffering in Telegraf.
-# # immediate_flush = true
-#
-# ## Send internal metrics (starting with `~sdk.go`) for valid, invalid, and
-# ## dropped metrics
-# # send_internal_metrics = true
-#
-# ## Optional TLS Config
-# ## Set to true/false to enforce TLS being enabled/disabled. If not set,
-# ## enable TLS only if any of the other options are specified.
-# # tls_enable =
-# ## Trusted root certificates for server
-# # tls_ca = "/path/to/cafile"
-# ## Used for TLS client certificate authentication
-# # tls_cert = "/path/to/certfile"
-# ## Used for TLS client certificate authentication
-# # tls_key = "/path/to/keyfile"
-# ## Send the specified TLS server name via SNI
-# # tls_server_name = "kubernetes.example.com"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## HTTP Timeout
-# # timeout="10s"
-#
-# ## MaxIdleConns controls the maximum number of idle (keep-alive) connections
-# ## across all hosts. Zero means unlimited.
-# # max_idle_conn = 0
-#
-# ## MaxIdleConnsPerHost, if non-zero, controls the maximum idle (keep-alive)
-# ## connections to keep per-host. If zero, DefaultMaxIdleConnsPerHost is used.
-# # max_idle_conn_per_host = 2
-#
-# ## Idle (keep-alive) connection timeout
-# # idle_conn_timeout = 0
-#
-# ## Authentication for Direct Ingestion.
-# ## Direct Ingestion requires one of: `token`,`auth_csp_api_token`, or
-# ## `auth_csp_client_credentials` (see https://docs.wavefront.com/csp_getting_started.html)
-# ## to learn more about using CSP credentials with Wavefront.
-# ## Not required if using a Wavefront proxy.
-#
-# ## Wavefront API Token Authentication, ignored if using a Wavefront proxy
-# ## 1. Click the gear icon at the top right in the Wavefront UI.
-# ## 2. Click your account name (usually your email)
-# ## 3. Click *API access*.
-# # token = "YOUR_TOKEN"
-#
-# ## Base URL used for authentication, ignored if using a Wavefront proxy or a
-# ## Wavefront API token.
-# # auth_csp_base_url=https://console.cloud.vmware.com
-#
-# ## CSP API Token Authentication, ignored if using a Wavefront proxy
-# # auth_csp_api_token=CSP_API_TOKEN_HERE
-#
-# ## CSP Client Credentials Authentication Information, ignored if using a
-# ## Wavefront proxy.
-# ## See also: https://docs.wavefront.com/csp_getting_started.html#whats-a-server-to-server-app
-# # [outputs.wavefront.auth_csp_client_credentials]
-# # app_id=CSP_APP_ID_HERE
-# # app_secret=CSP_APP_SECRET_HERE
-# # org_id=CSP_ORG_ID_HERE
-
-
-# # A plugin that can transmit metrics over WebSocket.
-# [[outputs.websocket]]
-# ## URL is the address to send metrics to. Make sure ws or wss scheme is used.
-# url = "ws://127.0.0.1:3000/telegraf"
-#
-# ## Timeouts (make sure read_timeout is larger than server ping interval or set to zero).
-# # connect_timeout = "30s"
-# # write_timeout = "30s"
-# # read_timeout = "30s"
-#
-# ## Optionally turn on using text data frames (binary by default).
-# # use_text_frames = false
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Optional SOCKS5 proxy to use
-# # socks5_enabled = true
-# # socks5_address = "127.0.0.1:1080"
-# # socks5_username = "alice"
-# # socks5_password = "pass123"
-#
-# ## Optional HTTP proxy to use
-# # use_system_proxy = false
-# # http_proxy_url = "http://localhost:8888"
-#
-# ## Data format to output.
-# ## Each data format has it's own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
-# # data_format = "influx"
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Additional HTTP Upgrade headers
-# # [outputs.websocket.headers]
-# # Authorization = "Bearer <TOKEN>"
-
-
-# # Send aggregated metrics to Yandex.Cloud Monitoring
-# [[outputs.yandex_cloud_monitoring]]
-# ## Timeout for HTTP writes.
-# # timeout = "20s"
-#
-# ## Yandex.Cloud monitoring API endpoint. Normally should not be changed
-# # endpoint_url = "https://monitoring.api.cloud.yandex.net/monitoring/v2/data/write"
-#
-# ## All user metrics should be sent with "custom" service specified. Normally should not be changed
-# # service = "custom"
-
-
-# # Send metrics to Zabbix
-# [[outputs.zabbix]]
-# ## Address and (optional) port of the Zabbix server
-# address = "zabbix.example.com:10051"
-#
-# ## Send metrics as type "Zabbix agent (active)"
-# # agent_active = false
-#
-# ## Add prefix to all keys sent to Zabbix.
-# # key_prefix = "telegraf."
-#
-# ## Name of the tag that contains the host name. Used to set the host in Zabbix.
-# ## If the tag is not found, use the hostname of the system running Telegraf.
-# # host_tag = "host"
-#
-# ## Skip measurement prefix to all keys sent to Zabbix.
-# # skip_measurement_prefix = false
-#
-# ## This field will be sent as HostMetadata to Zabbix Server to autoregister the host.
-# ## To enable this feature, this option must be set to a value other than "".
-# # autoregister = ""
-#
-# ## Interval to resend auto-registration data to Zabbix.
-# ## Only applies if autoregister feature is enabled.
-# ## This value is a lower limit, the actual resend should be triggered by the next flush interval.
-# # autoregister_resend_interval = "30m"
-#
-# ## Interval to send LLD data to Zabbix.
-# ## This value is a lower limit, the actual resend should be triggered by the next flush interval.
-# # lld_send_interval = "10m"
-#
-# ## Interval to delete stored LLD known data and start capturing it again.
-# ## This value is a lower limit, the actual resend should be triggered by the next flush interval.
-# # lld_clear_interval = "1h"
-
-
-###############################################################################
-# PROCESSOR PLUGINS #
-###############################################################################
-
-
-# # Attach AWS EC2 metadata to metrics
-# [[processors.aws_ec2]]
-# ## Instance identity document tags to attach to metrics.
-# ## For more information see:
-# ## https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-identity-documents.html
-# ##
-# ## Available tags:
-# ## * accountId
-# ## * architecture
-# ## * availabilityZone
-# ## * billingProducts
-# ## * imageId
-# ## * instanceId
-# ## * instanceType
-# ## * kernelId
-# ## * pendingTime
-# ## * privateIp
-# ## * ramdiskId
-# ## * region
-# ## * version
-# # imds_tags = []
-#
-# ## EC2 instance tags retrieved with DescribeTags action.
-# ## In case tag is empty upon retrieval it's omitted when tagging metrics.
-# ## Note that in order for this to work, role attached to EC2 instance or AWS
-# ## credentials available from the environment must have a policy attached, that
-# ## allows ec2:DescribeTags.
-# ##
-# ## For more information see:
-# ## https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_DescribeTags.html
-# # ec2_tags = []
-#
-# ## Paths to instance metadata information to attach to the metrics.
-# ## Specify the full path without the base-path e.g. `tags/instance/Name`.
-# ##
-# ## For more information see:
-# ## https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-metadata.html
-# # metadata_paths = []
-#
-# ## Allows to convert metadata tag-names to canonical names representing the
-# ## full path with slashes ('/') being replaces with underscores. By default,
-# ## only the last path element is used to name the tag.
-# # canonical_metadata_tags = false
-#
-# ## Timeout for http requests made by against aws ec2 metadata endpoint.
-# # timeout = "10s"
-#
-# ## ordered controls whether or not the metrics need to stay in the same order
-# ## this plugin received them in. If false, this plugin will change the order
-# ## with requests hitting cached results moving through immediately and not
-# ## waiting on slower lookups. This may cause issues for you if you are
-# ## depending on the order of metrics staying the same. If so, set this to true.
-# ## Keeping the metrics ordered may be slightly slower.
-# # ordered = false
-#
-# ## max_parallel_calls is the maximum number of AWS API calls to be in flight
-# ## at the same time.
-# ## It's probably best to keep this number fairly low.
-# # max_parallel_calls = 10
-#
-# ## cache_ttl determines how long each cached item will remain in the cache before
-# ## it is removed and subsequently needs to be queried for from the AWS API. By
-# ## default, no items are cached.
-# # cache_ttl = "0s"
-#
-# ## tag_cache_size determines how many of the values which are found in imds_tags
-# ## or ec2_tags will be kept in memory for faster lookup on successive processing
-# ## of metrics. You may want to adjust this if you have excessively large numbers
-# ## of tags on your EC2 instances, and you are using the ec2_tags field. This
-# ## typically does not need to be changed when using the imds_tags field.
-# # tag_cache_size = 1000
-#
-# ## log_cache_stats will emit a log line periodically to stdout with details of
-# ## cache entries, hits, misses, and evacuations since the last time stats were
-# ## emitted. This can be helpful in determining whether caching is being effective
-# ## in your environment. Stats are emitted every 30 seconds. By default, this
-# ## setting is disabled.
-
-
-# ## Batch metrics into separate batches by adding a tag indicating the batch index.
-# [[processors.batch]]
-# ## The name of the tag to use for adding the batch index
-# batch_tag = "my_batch"
-#
-# ## The number of batches to create
-# batches = 16
-#
-# ## Do not assign metrics with an existing batch assignment to a
-# ## different batch.
-# # skip_existing = false
-
-
-# # Apply metric modifications using override semantics.
-# [[processors.clone]]
-# ## All modifications on inputs and aggregators can be overridden:
-# # name_override = "new_name"
-# # name_prefix = "new_name_prefix"
-# # name_suffix = "new_name_suffix"
-#
-# ## Tags to be added (all values must be strings)
-# # [processors.clone.tags]
-# # additional_tag = "tag_value"
-
-
-# # Convert values to another metric value type
-# [[processors.converter]]
-# ## Tags to convert
-# ##
-# ## The table key determines the target type, and the array of key-values
-# ## select the keys to convert. The array may contain globs.
-# ## <target-type> = [<tag-key>...]
-# [processors.converter.tags]
-# measurement = []
-# string = []
-# integer = []
-# unsigned = []
-# boolean = []
-# float = []
-#
-# ## Optional tag to use as metric timestamp
-# # timestamp = []
-#
-# ## Format of the timestamp determined by the tag above. This can be any of
-# ## "unix", "unix_ms", "unix_us", "unix_ns", or a valid Golang time format.
-# ## It is required, when using the timestamp option.
-# # timestamp_format = ""
-#
-# ## Fields to convert
-# ##
-# ## The table key determines the target type, and the array of key-values
-# ## select the keys to convert. The array may contain globs.
-# ## <target-type> = [<field-key>...]
-# [processors.converter.fields]
-# measurement = []
-# tag = []
-# string = []
-# integer = []
-# unsigned = []
-# boolean = []
-# float = []
-#
-# ## Optional field to use for converting base64 encoding of IEEE 754 Float32 values
-# ## i.e. data_json_content_state_openconfig-platform-psu:output-power":"RKeAAA=="
-# ## into a float32 value 1340
-# # base64_ieee_float32 = []
-#
-# ## Optional field to use as metric timestamp
-# # timestamp = []
-#
-# ## Format of the timestamp determined by the field above. This can be any
-# ## of "unix", "unix_ms", "unix_us", "unix_ns", or a valid Golang time
-# ## format. It is required, when using the timestamp option.
-# # timestamp_format = ""
-
-
-# # Compute the cumulative sum of the given fields
-# [[processors.cumulative_sum]]
-# ## Numerical fields to be processed (accepting wildcards)
-# # fields = ["*"]
-#
-# ## Interval after which metrics are evicted from the cache and the
-# ## sum values are reset to zero. A zero or unset value will keep the
-# ## metric forever.
-# ## It is strongly recommended to set an expiry interval to avoid
-# ## growing memory usage when varying metric series are processed.
-
-
-# # Dates measurements, tags, and fields that pass through this filter.
-# [[processors.date]]
-# ## New tag to create
-# tag_key = "month"
-#
-# ## New field to create (cannot set both field_key and tag_key)
-# # field_key = "month"
-#
-# ## Date format string, must be a representation of the Go "reference time"
-# ## which is "Mon Jan 2 15:04:05 -0700 MST 2006".
-# date_format = "Jan"
-#
-# ## If destination is a field, date format can also be one of
-# ## "unix", "unix_ms", "unix_us", or "unix_ns", which will insert an integer field.
-# # date_format = "unix"
-#
-# ## Offset duration added to the date string when writing the new tag.
-# # date_offset = "0s"
-#
-# ## Timezone to use when creating the tag or field using a reference time
-# ## string. This can be set to one of "UTC", "Local", or to a location name
-# ## in the IANA Time Zone database.
-# ## example: timezone = "America/Los_Angeles"
-# # timezone = "UTC"
-
-
-# # Filter metrics with repeating field values
-# [[processors.dedup]]
-# ## Maximum time to suppress output
-# dedup_interval = "600s"
-
-
-# ## Set default fields and tags on your metric(s) when they are nil or empty
-# [[processors.defaults]]
-# ## Ensures a set of fields or tags always exists on your metric(s) with their
-# ## respective default value.
-# ## For any given field/tag pair (key = default), if it's not set, a field/tag
-# ## is set on the metric with the specified default.
-# ##
-# ## A field is considered not set if it is nil on the incoming metric;
-# ## or it is not nil but its value is an empty string or is a string
-# ## of one or more spaces.
-# ## <target-field> = <value>
-# [processors.defaults.fields]
-# field_1 = "bar"
-# time_idle = 0
-# is_error = true
-# ## A tag is considered not set if it is nil on the incoming metric;
-# ## or it is not nil but it is empty string or a string of one or
-# ## more spaces.
-# ## <target-tag> = <value>
-# [processors.defaults.tags]
-# tag_1 = "foo"
-
-
-# # Map enum values according to given table.
-# [[processors.enum]]
-# [[processors.enum.mapping]]
-# ## Names of the fields to map. Globs accepted.
-# fields = ["status"]
-#
-# ## Name of the tags to map. Globs accepted.
-# # tags = ["status"]
-#
-# ## Destination tag or field to be used for the mapped value. By default the
-# ## source tag or field is used, overwriting the original value.
-# dest = "status_code"
-#
-# ## Default value to be used for all values not contained in the mapping
-# ## table. When unset and no match is found, the original field will remain
-# ## unmodified and the destination tag or field will not be created.
-# # default = 0
-#
-# ## Table of mappings
-# [processors.enum.mapping.value_mappings]
-# green = 1
-# amber = 2
-# red = 3
-
-
-# # Run executable as long-running processor plugin
-# [[processors.execd]]
-# ## One program to run as daemon.
-# ## NOTE: process and each argument should each be their own string
-# ## eg: command = ["/path/to/your_program", "arg1", "arg2"]
-# command = ["cat"]
-#
-# ## Environment variables
-# ## Array of "key=value" pairs to pass as environment variables
-# ## e.g. "KEY=value", "USERNAME=John Doe",
-# ## "LD_LIBRARY_PATH=/opt/custom/lib64:/usr/local/libs"
-# # environment = []
-#
-# ## Delay before the process is restarted after an unexpected termination
-# # restart_delay = "10s"
-#
-# ## Serialization format for communicating with the executed program
-# ## Please note that the corresponding data-format must exist both in
-# ## parsers and serializers
-# # data_format = "influx"
-
-
-# # Performs file path manipulations on tags and fields
-# [[processors.filepath]]
-# ## Treat the tag value as a path and convert it to its last element, storing the result in a new tag
-# # [[processors.filepath.basename]]
-# # tag = "path"
-# # dest = "basepath"
-#
-# ## Treat the field value as a path and keep all but the last element of path, typically the path's directory
-# # [[processors.filepath.dirname]]
-# # field = "path"
-#
-# ## Treat the tag value as a path, converting it to its the last element without its suffix
-# # [[processors.filepath.stem]]
-# # tag = "path"
-#
-# ## Treat the tag value as a path, converting it to the shortest path name equivalent
-# ## to path by purely lexical processing
-# # [[processors.filepath.clean]]
-# # tag = "path"
-#
-# ## Treat the tag value as a path, converting it to a relative path that is lexically
-# ## equivalent to the source path when joined to 'base_path'
-# # [[processors.filepath.rel]]
-# # tag = "path"
-# # base_path = "/var/log"
-#
-# ## Treat the tag value as a path, replacing each separator character in path with a '/' character. Has only
-# ## effect on Windows
-# # [[processors.filepath.toslash]]
-# # tag = "path"
-
-
-# # Filter metrics by the given criteria
-# [[processors.filter]]
-# ## Default action if no rule applies
-# # default = "pass"
-#
-# ## Rules to apply on the incoming metrics (multiple rules are possible)
-# ## The rules are evaluated in order and the first matching rule is applied.
-# ## In case no rule matches the "default" is applied.
-# ## All filter criteria in a rule must apply for the rule to match the metric
-# ## i.e. the criteria are combined by a logical AND. If a criterion is
-# ## omitted it is NOT applied at all and ignored.
-# [[processors.filter.rule]]
-# ## List of metric names to match including glob expressions
-# # name = []
-#
-# ## List of tag key/values pairs to match including glob expressions
-# ## ALL given tags keys must exist and at least one value must match
-# ## for the metric to match the rule.
-# # tags = {}
-#
-# ## List of field keys to match including glob expressions
-# ## At least one field must exist for the metric to match the rule.
-# # fields = []
-#
-# ## Action to apply for this rule
-# ## "pass" will keep the metric and pass it on, while "drop" will remove
-# ## the metric
-# # action = "drop"
-
-
-# # Add a tag of the network interface name looked up over SNMP by interface number
-# [[processors.ifname]]
-# ## Name of tag holding the interface number
-# # tag = "ifIndex"
-#
-# ## Name of output tag where service name will be added
-# # dest = "ifName"
-#
-# ## Name of tag of the SNMP agent to request the interface name from
-# ## example: agent = "source"
-# # agent = "agent"
-#
-# ## Timeout for each request.
-# # timeout = "5s"
-#
-# ## SNMP version; can be 1, 2, or 3.
-# # version = 2
-#
-# ## SNMP community string.
-# # community = "public"
-#
-# ## Number of retries to attempt.
-# # retries = 3
-#
-# ## The GETBULK max-repetitions parameter.
-# # max_repetitions = 10
-#
-# ## SNMPv3 authentication and encryption options.
-# ##
-# ## Security Name.
-# # sec_name = "myuser"
-# ## Authentication protocol; one of "MD5", "SHA", or "".
-# # auth_protocol = "MD5"
-# ## Authentication password.
-# # auth_password = "pass"
-# ## Security Level; one of "noAuthNoPriv", "authNoPriv", or "authPriv".
-# # sec_level = "authNoPriv"
-# ## Context Name.
-# # context_name = ""
-# ## Privacy protocol used for encrypted messages; one of "DES", "AES" or "".
-# # priv_protocol = ""
-# ## Privacy password used for encrypted messages.
-# # priv_password = ""
-#
-# ## max_parallel_lookups is the maximum number of SNMP requests to
-# ## make at the same time.
-# # max_parallel_lookups = 100
-#
-# ## ordered controls whether or not the metrics need to stay in the
-# ## same order this plugin received them in. If false, this plugin
-# ## may change the order when data is cached. If you need metrics to
-# ## stay in order set this to true. keeping the metrics ordered may
-# ## be slightly slower
-# # ordered = false
-#
-# ## cache_ttl is the amount of time interface names are cached for a
-# ## given agent. After this period elapses if names are needed they
-# ## will be retrieved again.
-# # cache_ttl = "8h"
-
-
-# # Lookup a key derived from metrics in a static file
-# [[processors.lookup]]
-# ## List of files containing the lookup-table
-# files = ["path/to/lut.json", "path/to/another_lut.json"]
-#
-# ## Format of the lookup file(s)
-# ## Available formats are:
-# ## json -- JSON file with 'key: {tag-key: tag-value, ...}' mapping
-# ## csv_key_name_value -- CSV file with 'key,tag-key,tag-value,...,tag-key,tag-value' mapping
-# ## csv_key_values -- CSV file with a header containing tag-names and
-# ## rows with 'key,tag-value,...,tag-value' mappings
-# # format = "json"
-#
-# ## Template for generating the lookup-key from the metric.
-# ## This is a Golang template (see https://pkg.go.dev/text/template) to
-# ## access the metric name (`{{.Name}}`), a tag value (`{{.Tag "name"}}`) or
-# ## a field value (`{{.Field "name"}}`).
-# key = '{{.Tag "host"}}'
-
-
-# # Adds noise to numerical fields
-# [[processors.noise]]
-# ## Specified the type of the random distribution.
-# ## Can be "laplacian", "gaussian" or "uniform".
-# # type = "laplacian
-#
-# ## Center of the distribution.
-# ## Only used for Laplacian and Gaussian distributions.
-# # mu = 0.0
-#
-# ## Scale parameter for the Laplacian or Gaussian distribution
-# # scale = 1.0
-#
-# ## Upper and lower bound of the Uniform distribution
-# # min = -1.0
-# # max = 1.0
-#
-# ## Apply the noise only to numeric fields matching the filter criteria below.
-# ## Excludes takes precedence over includes.
-# # include_fields = []
-# # exclude_fields = []
-
-
-# # Apply metric modifications using override semantics.
-# [[processors.override]]
-# ## All modifications on inputs and aggregators can be overridden:
-# # name_override = "new_name"
-# # name_prefix = "new_name_prefix"
-# # name_suffix = "new_name_suffix"
-#
-# ## Tags to be added (all values must be strings)
-# # [processors.override.tags]
-# # additional_tag = "tag_value"
-
-
-# # Parse a value in a specified field(s)/tag(s) and add the result in a new metric
-# [[processors.parser]]
-# ## The name of the fields whose value will be parsed.
-# parse_fields = ["message"]
-#
-# ## Fields to base64 decode.
-# ## These fields do not need to be specified in parse_fields.
-# ## Fields specified here will have base64 decode applied to them.
-# # parse_fields_base64 = []
-#
-# ## The name of the tags whose value will be parsed.
-# # parse_tags = []
-#
-# ## If true, incoming metrics are not emitted.
-# # drop_original = false
-#
-# ## Merge Behavior
-# ## Only has effect when drop_original is set to false. Possible options
-# ## include:
-# ## * override: emitted metrics are merged by overriding the original metric
-# ## using the newly parsed metrics, but retains the original metric
-# ## timestamp.
-# ## * override-with-timestamp: the same as "override", but the timestamp is
-# ## set based on the new metrics if present.
-# # merge = ""
-#
-# ## The dataformat to be read from files
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-
-
-# # Rotate a single valued metric into a multi field metric
-# [[processors.pivot]]
-# ## Tag to use for naming the new field.
-# tag_key = "name"
-# ## Field to use as the value of the new field.
-# value_key = "value"
-
-
-# # Given a tag/field of a TCP or UDP port number, add a tag/field of the service name looked up in the system services file
-# [[processors.port_name]]
-# ## Name of tag holding the port number
-# # tag = "port"
-# ## Or name of the field holding the port number
-# # field = "port"
-#
-# ## Name of output tag or field (depending on the source) where service name will be added
-# # dest = "service"
-#
-# ## Default tcp or udp
-# # default_protocol = "tcp"
-#
-# ## Tag containing the protocol (tcp or udp, case-insensitive)
-# # protocol_tag = "proto"
-#
-# ## Field containing the protocol (tcp or udp, case-insensitive)
-# # protocol_field = "proto"
-
-
-# # Print all metrics that pass through this filter.
-# [[processors.printer]]
-# ## Maximum line length in bytes. Useful only for debugging.
-# # influx_max_line_bytes = 0
-#
-# ## When true, fields will be output in ascending lexical order. Enabling
-# ## this option will result in decreased performance and is only recommended
-# ## when you need predictable ordering while debugging.
-# # influx_sort_fields = false
-#
-# ## When true, Telegraf will output unsigned integers as unsigned values,
-# ## i.e.: `42u`. You will need a version of InfluxDB supporting unsigned
-# ## integer values. Enabling this option will result in field type errors if
-# ## existing data has been written.
-# # influx_uint_support = false
-#
-# ## When true, Telegraf will omit the timestamp on data to allow InfluxDB
-# ## to set the timestamp of the data during ingestion. This is generally NOT
-# ## what you want as it can lead to data points captured at different times
-# ## getting omitted due to similar data.
-# # influx_omit_timestamp = false
-
-
-# # Transforms tag and field values as well as measurement, tag and field names with regex pattern
-# [[processors.regex]]
-# namepass = ["nginx_requests"]
-#
-# ## Tag value conversion(s). Multiple instances are allowed.
-# [[processors.regex.tags]]
-# ## Tag(s) to process with optional glob expressions such as '*'.
-# key = "resp_code"
-# ## Regular expression to match the tag value. If the value doesn't
-# ## match the tag is ignored.
-# pattern = "^(\\d)\\d\\d$"
-# ## Replacement expression defining the value of the target tag. You can
-# ## use regexp groups or named groups e.g. ${1} references the first group.
-# replacement = "${1}xx"
-# ## Name of the target tag defaulting to 'key' if not specified.
-# ## In case of wildcards being used in `key` the currently processed
-# ## tag-name is used as target.
-# # result_key = "method"
-# ## Appends the replacement to the target tag instead of overwriting it when
-# ## set to true.
-# # append = false
-#
-# ## Field value conversion(s). Multiple instances are allowed.
-# [[processors.regex.fields]]
-# ## Field(s) to process with optional glob expressions such as '*'.
-# key = "request"
-# ## Regular expression to match the field value. If the value doesn't
-# ## match or the field doesn't contain a string the field is ignored.
-# pattern = "^/api(?P<method>/[\\w/]+)\\S*"
-# ## Replacement expression defining the value of the target field. You can
-# ## use regexp groups or named groups e.g. ${method} references the group
-# ## named "method".
-# replacement = "${method}"
-# ## Name of the target field defaulting to 'key' if not specified.
-# ## In case of wildcards being used in `key` the currently processed
-# ## field-name is used as target.
-# # result_key = "method"
-#
-# ## Rename metric fields
-# [[processors.regex.field_rename]]
-# ## Regular expression to match on the field name
-# pattern = "^search_(\\w+)d$"
-# ## Replacement expression defining the name of the new field
-# replacement = "${1}"
-# ## If the new field name already exists, you can either "overwrite" the
-# ## existing one with the value of the renamed field OR you can "keep"
-# ## both the existing and source field.
-# # result_key = "keep"
-#
-# ## Rename metric tags
-# [[processors.regex.tag_rename]]
-# ## Regular expression to match on a tag name
-# pattern = "^search_(\\w+)d$"
-# ## Replacement expression defining the name of the new tag
-# replacement = "${1}"
-# ## If the new tag name already exists, you can either "overwrite" the
-# ## existing one with the value of the renamed tag OR you can "keep"
-# ## both the existing and source tag.
-# # result_key = "keep"
-#
-# ## Rename metrics
-# [[processors.regex.metric_rename]]
-# ## Regular expression to match on an metric name
-# pattern = "^search_(\\w+)d$"
-# ## Replacement expression defining the new name of the metric
-# replacement = "${1}"
-
-
-# # Rename measurements, tags, and fields that pass through this filter.
-# [[processors.rename]]
-# ## Specify one sub-table per rename operation.
-# [[processors.rename.replace]]
-# measurement = "network_interface_throughput"
-# dest = "throughput"
-#
-# [[processors.rename.replace]]
-# tag = "hostname"
-# dest = "host"
-#
-# [[processors.rename.replace]]
-# field = "lower"
-# dest = "min"
-#
-# [[processors.rename.replace]]
-# field = "upper"
-# dest = "max"
-
-
-# # ReverseDNS does a reverse lookup on IP addresses to retrieve the DNS name
-# [[processors.reverse_dns]]
-# ## For optimal performance, you may want to limit which metrics are passed to this
-# ## processor. eg:
-# ## namepass = ["my_metric_*"]
-#
-# ## cache_ttl is how long the dns entries should stay cached for.
-# ## generally longer is better, but if you expect a large number of diverse lookups
-# ## you'll want to consider memory use.
-# cache_ttl = "24h"
-#
-# ## lookup_timeout is how long should you wait for a single dns request to respond.
-# ## this is also the maximum acceptable latency for a metric travelling through
-# ## the reverse_dns processor. After lookup_timeout is exceeded, a metric will
-# ## be passed on unaltered.
-# ## multiple simultaneous resolution requests for the same IP will only make a
-# ## single rDNS request, and they will all wait for the answer for this long.
-# lookup_timeout = "3s"
-#
-# ## max_parallel_lookups is the maximum number of dns requests to be in flight
-# ## at the same time. Requesting hitting cached values do not count against this
-# ## total, and neither do mulptiple requests for the same IP.
-# ## It's probably best to keep this number fairly low.
-# max_parallel_lookups = 10
-#
-# ## ordered controls whether or not the metrics need to stay in the same order
-# ## this plugin received them in. If false, this plugin will change the order
-# ## with requests hitting cached results moving through immediately and not
-# ## waiting on slower lookups. This may cause issues for you if you are
-# ## depending on the order of metrics staying the same. If so, set this to true.
-# ## keeping the metrics ordered may be slightly slower.
-# ordered = false
-#
-# [[processors.reverse_dns.lookup]]
-# ## get the ip from the field "source_ip", and put the result in the field "source_name"
-# field = "source_ip"
-# dest = "source_name"
-#
-# [[processors.reverse_dns.lookup]]
-# ## get the ip from the tag "destination_ip", and put the result in the tag
-# ## "destination_name".
-# tag = "destination_ip"
-# dest = "destination_name"
-#
-# ## If you would prefer destination_name to be a field instead, you can use a
-# ## processors.converter after this one, specifying the order attribute.
-
-
-# # Round numerical fields
-# [[processors.round]]
-# ## Precision to round to.
-# ## A positive number indicates rounding to the right of the decimal separator (i.e. the fractional part).
-# ## A negative number indicates rounding to the left of the decimal separator.
-# # precision = 0
-#
-# ## Round only numeric fields matching the filter criteria below.
-# ## Excludes takes precedence over includes.
-# # include_fields = ["*"]
-# # exclude_fields = []
-
-
-# # Add the S2 Cell ID as a tag based on latitude and longitude fields
-# [[processors.s2geo]]
-# ## The name of the lat and lon fields containing WGS-84 latitude and
-# ## longitude in decimal degrees.
-# # lat_field = "lat"
-# # lon_field = "lon"
-#
-# ## New tag to create
-# # tag_key = "s2_cell_id"
-#
-# ## Cell level (see https://s2geometry.io/resources/s2cell_statistics.html)
-# # cell_level = 9
-
-
-# # Scale values with a predefined range to a different output range.
-# [[processors.scale]]
-# ## It is possible to define multiple different scaling that can be applied
-# ## do different sets of fields. Each scaling expects the following
-# ## arguments:
-# ## - input_minimum: Minimum expected input value
-# ## - input_maximum: Maximum expected input value
-# ## - output_minimum: Minimum desired output value
-# ## - output_maximum: Maximum desired output value
-# ## alternatively you can specify a scaling with factor and offset
-# ## - factor: factor to scale the input value with
-# ## - offset: additive offset for value after scaling
-# ## - fields: a list of field names (or filters) to apply this scaling to
-#
-# ## Example: Scaling with minimum and maximum values
-# # [[processors.scale.scaling]]
-# # input_minimum = 0.0
-# # input_maximum = 1.0
-# # output_minimum = 0.0
-# # output_maximum = 100.0
-# # fields = ["temperature1", "temperature2"]
-#
-# ## Example: Scaling with factor and offset
-# # [[processors.scale.scaling]]
-# # factor = 10.0
-# # offset = -5.0
-# # fields = ["voltage*"]
-
-
-# # Lookup extra tags via SNMP based on the table index
-# [[processors.snmp_lookup]]
-# ## Name of tag of the SNMP agent to do the lookup on
-# # agent_tag = "source"
-#
-# ## Name of tag holding the table row index
-# # index_tag = "index"
-#
-# ## Timeout for each request.
-# # timeout = "5s"
-#
-# ## SNMP version; can be 1, 2, or 3.
-# # version = 2
-#
-# ## SNMP community string.
-# # community = "public"
-#
-# ## Number of retries to attempt.
-# # retries = 3
-#
-# ## The GETBULK max-repetitions parameter.
-# # max_repetitions = 10
-#
-# ## SNMPv3 authentication and encryption options.
-# ##
-# ## Security Name.
-# # sec_name = "myuser"
-# ## Authentication protocol; one of "MD5", "SHA", or "".
-# # auth_protocol = "MD5"
-# ## Authentication password.
-# # auth_password = "pass"
-# ## Security Level; one of "noAuthNoPriv", "authNoPriv", or "authPriv".
-# # sec_level = "authNoPriv"
-# ## Context Name.
-# # context_name = ""
-# ## Privacy protocol used for encrypted messages; one of "DES", "AES" or "".
-# # priv_protocol = ""
-# ## Privacy password used for encrypted messages.
-# # priv_password = ""
-#
-# ## The maximum number of SNMP requests to make at the same time.
-# # max_parallel_lookups = 16
-#
-# ## The amount of agents to cache entries for. If limit is reached,
-# ## oldest will be removed first. 0 means no limit.
-# # max_cache_entries = 100
-#
-# ## Control whether the metrics need to stay in the same order this plugin
-# ## received them in. If false, this plugin may change the order when data is
-# ## cached. If you need metrics to stay in order set this to true. Keeping the
-# ## metrics ordered may be slightly slower.
-# # ordered = false
-#
-# ## The amount of time entries are cached for a given agent. After this period
-# ## elapses if tags are needed they will be retrieved again.
-# # cache_ttl = "8h"
-#
-# ## Minimum time between requests to an agent in case an index could not be
-# ## resolved. If set to zero no request on missing indices will be triggered.
-# # min_time_between_updates = "5m"
-#
-# ## List of tags to be looked up.
-# [[processors.snmp_lookup.tag]]
-# ## Object identifier of the variable as a numeric or textual OID.
-# oid = "IF-MIB::ifName"
-#
-# ## Name of the tag to create. If not specified, it defaults to the value of 'oid'.
-# ## If 'oid' is numeric, an attempt to translate the numeric OID into a textual OID
-# ## will be made.
-# # name = ""
-#
-# ## Apply one of the following conversions to the variable value:
-# ## ipaddr: Convert the value to an IP address.
-# ## enum: Convert the value according to its syntax in the MIB.
-# ## displayhint: Format the value according to the textual convention in the MIB.
-# ##
-# # conversion = ""
-
-
-# # Split a metric into one or more metrics with the specified field(s)/tag(s)
-# [[processors.split]]
-# ## Keeps the original metric by default
-# # drop_original = false
-#
-# ## Template for an output metric
-# ## Users can define multiple templates to split the original metric into
-# ## multiple, potentially overlapping, metrics.
-# [[processors.split.template]]
-# ## New metric name
-# name = ""
-#
-# ## List of tag keys for this metric template, accepts globs, e.g. "*"
-# tags = []
-#
-# ## List of field keys for this metric template, accepts globs, e.g. "*"
-# fields = []
-
-
-# # Process metrics using a Starlark script
-# [[processors.starlark]]
-# ## The Starlark source can be set as a string in this configuration file, or
-# ## by referencing a file containing the script. Only one source or script
-# ## should be set at once.
-#
-# ## Source of the Starlark script.
-# source = '''
-# def apply(metric):
-# return metric
-# '''
-#
-# ## File containing a Starlark script.
-# # script = "/usr/local/bin/myscript.star"
-#
-# ## The constants of the Starlark script.
-# # [processors.starlark.constants]
-# # max_size = 10
-# # threshold = 0.75
-# # default_name = "Julia"
-# # debug_mode = true
-
-
-# # Perform string processing on tags, fields, and measurements
-# [[processors.strings]]
-# ## Convert a field value to lowercase and store in a new field
-# # [[processors.strings.lowercase]]
-# # field = "uri_stem"
-# # dest = "uri_stem_normalised"
-#
-# ## Convert a tag value to uppercase
-# # [[processors.strings.uppercase]]
-# # tag = "method"
-#
-# ## Convert a field value to titlecase
-# # [[processors.strings.titlecase]]
-# # field = "status"
-#
-# ## Trim leading and trailing whitespace using the default cutset
-# # [[processors.strings.trim]]
-# # field = "message"
-#
-# ## Trim leading characters in cutset
-# # [[processors.strings.trim_left]]
-# # field = "message"
-# # cutset = "\t"
-#
-# ## Trim trailing characters in cutset
-# # [[processors.strings.trim_right]]
-# # field = "message"
-# # cutset = "\r\n"
-#
-# ## Trim the given prefix from the field
-# # [[processors.strings.trim_prefix]]
-# # field = "my_value"
-# # prefix = "my_"
-#
-# ## Trim the given suffix from the field
-# # [[processors.strings.trim_suffix]]
-# # field = "read_count"
-# # suffix = "_count"
-#
-# ## Replace all non-overlapping instances of old with new
-# # [[processors.strings.replace]]
-# # measurement = "*"
-# # old = ":"
-# # new = "_"
-#
-# ## Trims strings based on width
-# # [[processors.strings.left]]
-# # field = "message"
-# # width = 10
-#
-# ## Decode a base64 encoded utf-8 string
-# # [[processors.strings.base64decode]]
-# # field = "message"
-#
-# ## Sanitize a string to ensure it is a valid utf-8 string
-# ## Each run of invalid UTF-8 byte sequences is replaced by the replacement string, which may be empty
-# # [[processors.strings.valid_utf8]]
-# # field = "message"
-# # replacement = ""
-
-
-# # Restricts the number of tags that can pass through this filter and chooses which tags to preserve when over the limit.
-# [[processors.tag_limit]]
-# ## Maximum number of tags to preserve
-# limit = 3
-#
-# ## List of tags to preferentially preserve
-# keep = ["environment", "region"]
-
-
-# # Uses a Go template to create a new tag
-# [[processors.template]]
-# ## Go template used to create the tag name of the output. In order to
-# ## ease TOML escaping requirements, you should use single quotes around
-# ## the template string.
-# tag = "topic"
-#
-# ## Go template used to create the tag value of the output. In order to
-# ## ease TOML escaping requirements, you should use single quotes around
-# ## the template string.
-# template = '{{ .Tag "hostname" }}.{{ .Tag "level" }}'
-
-
-# # Convert a timestamp field to other timestamp format
-# [[processors.timestamp]]
-# ## Timestamp key to convert
-# ## Specify the field name that contains the timestamp to convert. The result
-# ## will replace the current field value.
-# field = ""
-#
-# ## Timestamp Format
-# ## This defines the time layout used to interpret the source timestamp field.
-# ## The time must be `unix`, `unix_ms`, `unix_us`, `unix_ns`, or a time in Go
-# ## "reference time". For more information on Go "reference time". For more
-# ## see: https://golang.org/pkg/time/#Time.Format
-# source_timestamp_format = ""
-#
-# ## Timestamp Timezone
-# ## Source timestamp timezone. If not set, assumed to be in UTC.
-# ## Options are as follows:
-# ## 1. UTC -- or unspecified will return timestamp in UTC
-# ## 2. Local -- interpret based on machine localtime
-# ## 3. "America/New_York" -- Unix TZ values like those found in
-# ## https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
-# # source_timestamp_timezone = ""
-#
-# ## Target timestamp format
-# ## This defines the destination timestamp format. It also can accept either
-# ## `unix`, `unix_ms`, `unix_us`, `unix_ns`, or a time in Go "reference time".
-# destination_timestamp_format = ""
-#
-# ## Target Timestamp Timezone
-# ## Source timestamp timezone. If not set, assumed to be in UTC.
-# ## Options are as follows:
-# ## 1. UTC -- or unspecified will return timestamp in UTC
-# ## 2. Local -- interpret based on machine localtime
-# ## 3. "America/New_York" -- Unix TZ values like those found in
-# ## https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
-# # destination_timestamp_timezone = ""
-
-
-# # Print all metrics that pass through this filter.
-# [[processors.topk]]
-# ## How many seconds between aggregations
-# # period = 10
-#
-# ## How many top buckets to return per field
-# ## Every field specified to aggregate over will return k number of results.
-# ## For example, 1 field with k of 10 will return 10 buckets. While 2 fields
-# ## with k of 3 will return 6 buckets.
-# # k = 10
-#
-# ## Over which tags should the aggregation be done. Globs can be specified, in
-# ## which case any tag matching the glob will aggregated over. If set to an
-# ## empty list is no aggregation over tags is done
-# # group_by = ['*']
-#
-# ## The field(s) to aggregate
-# ## Each field defined is used to create an independent aggregation. Each
-# ## aggregation will return k buckets. If a metric does not have a defined
-# ## field the metric will be dropped from the aggregation. Considering using
-# ## the defaults processor plugin to ensure fields are set if required.
-# # fields = ["value"]
-#
-# ## What aggregation function to use. Options: sum, mean, min, max
-# # aggregation = "mean"
-#
-# ## Instead of the top k largest metrics, return the bottom k lowest metrics
-# # bottomk = false
-#
-# ## The plugin assigns each metric a GroupBy tag generated from its name and
-# ## tags. If this setting is different than "" the plugin will add a
-# ## tag (which name will be the value of this setting) to each metric with
-# ## the value of the calculated GroupBy tag. Useful for debugging
-# # add_groupby_tag = ""
-#
-# ## These settings provide a way to know the position of each metric in
-# ## the top k. The 'add_rank_field' setting allows to specify for which
-# ## fields the position is required. If the list is non empty, then a field
-# ## will be added to each and every metric for each string present in this
-# ## setting. This field will contain the ranking of the group that
-# ## the metric belonged to when aggregated over that field.
-# ## The name of the field will be set to the name of the aggregation field,
-# ## suffixed with the string '_topk_rank'
-# # add_rank_fields = []
-#
-# ## These settings provide a way to know what values the plugin is generating
-# ## when aggregating metrics. The 'add_aggregate_field' setting allows to
-# ## specify for which fields the final aggregation value is required. If the
-# ## list is non empty, then a field will be added to each every metric for
-# ## each field present in this setting. This field will contain
-# ## the computed aggregation for the group that the metric belonged to when
-# ## aggregated over that field.
-# ## The name of the field will be set to the name of the aggregation field,
-# ## suffixed with the string '_topk_aggregate'
-# # add_aggregate_fields = []
-
-
-# # Rotate multi field metric into several single field metrics
-# [[processors.unpivot]]
-# ## Metric mode to pivot to
-# ## Set to "tag", metrics are pivoted as a tag and the metric is kept as
-# ## the original measurement name. Tag key name is set by tag_key value.
-# ## Set to "metric" creates a new metric named the field name. With this
-# ## option the tag_key is ignored. Be aware that this could lead to metric
-# ## name conflicts!
-# # use_fieldname_as = "tag"
-#
-# ## Tag to use for the name.
-# # tag_key = "name"
-#
-# ## Field to use for the name of the value.
-# # value_key = "value"
-
-
-###############################################################################
-# AGGREGATOR PLUGINS #
-###############################################################################
-
-
-# # Keep the aggregate basicstats of each metric passing through.
-# [[aggregators.basicstats]]
-# ## The period on which to flush & clear the aggregator.
-# # period = "30s"
-#
-# ## If true, the original metric will be dropped by the
-# ## aggregator and will not get sent to the output plugins.
-# # drop_original = false
-#
-# ## Configures which basic stats to push as fields
-# # stats = ["count","min","max","mean","variance","stdev"]
-
-
-# # Calculates a derivative for every field.
-# [[aggregators.derivative]]
-# ## The period in which to flush the aggregator.
-# # period = "30s"
-#
-# ## Suffix to append for the resulting derivative field.
-# # suffix = "_rate"
-#
-# ## Field to use for the quotient when computing the derivative.
-# ## When using a field as the derivation parameter the name of that field will
-# ## be used for the resulting derivative, e.g. *fieldname_by_parameter*.
-# ## By default the timestamps of the metrics are used and the suffix is omitted.
-# # variable = ""
-#
-# ## Maximum number of roll-overs in case only one measurement is found during a period.
-# # max_roll_over = 10
-
-
-# # Report the final metric of a series
-# [[aggregators.final]]
-# ## The period on which to flush & clear the aggregator.
-# # period = "30s"
-#
-# ## If true, the original metric will be dropped by the
-# ## aggregator and will not get sent to the output plugins.
-# # drop_original = false
-#
-# ## If false, _final is added to every field name
-# # keep_original_field_names = false
-#
-# ## The time that a series is not updated until considering it final. Ignored
-# ## when output_strategy is "periodic".
-# # series_timeout = "5m"
-#
-# ## Output strategy, supported values:
-# ## timeout -- output a metric if no new input arrived for `series_timeout`
-# ## periodic -- output the last received metric every `period`
-# # output_strategy = "timeout"
-
-
-# # Configuration for aggregate histogram metrics
-# [[aggregators.histogram]]
-# ## The period in which to flush the aggregator.
-# # period = "30s"
-#
-# ## If true, the original metric will be dropped by the
-# ## aggregator and will not get sent to the output plugins.
-# # drop_original = false
-#
-# ## If true, the histogram will be reset on flush instead
-# ## of accumulating the results.
-# reset = false
-#
-# ## Whether bucket values should be accumulated. If set to false, "gt" tag will be added.
-# ## Defaults to true.
-# cumulative = true
-#
-# ## Expiration interval for each histogram. The histogram will be expired if
-# ## there are no changes in any buckets for this time interval. 0 == no expiration.
-# # expiration_interval = "0m"
-#
-# ## If true, aggregated histogram are pushed to output only if it was updated since
-# ## previous push. Defaults to false.
-# # push_only_on_update = false
-#
-# ## Example config that aggregates all fields of the metric.
-# # [[aggregators.histogram.config]]
-# # ## Right borders of buckets (with +Inf implicitly added).
-# # buckets = [0.0, 15.6, 34.5, 49.1, 71.5, 80.5, 94.5, 100.0]
-# # ## The name of metric.
-# # measurement_name = "cpu"
-#
-# ## Example config that aggregates only specific fields of the metric.
-# # [[aggregators.histogram.config]]
-# # ## Right borders of buckets (with +Inf implicitly added).
-# # buckets = [0.0, 10.0, 20.0, 30.0, 40.0, 50.0, 60.0, 70.0, 80.0, 90.0, 100.0]
-# # ## The name of metric.
-# # measurement_name = "diskio"
-# # ## The concrete fields of metric
-# # fields = ["io_time", "read_time", "write_time"]
-
-
-# # Merge metrics into multifield metrics by series key
-# [[aggregators.merge]]
-# ## General Aggregator Arguments:
-# ## The period on which to flush & clear the aggregator.
-# # period = "30s"
-#
-# ## Precision to round the metric timestamp to
-# ## This is useful for cases where metrics to merge arrive within a small
-# ## interval and thus vary in timestamp. The timestamp of the resulting metric
-# ## is also rounded.
-# # round_timestamp_to = "1ns"
-#
-# ## If true, the original metric will be dropped by the
-# ## aggregator and will not get sent to the output plugins.
-# drop_original = true
-
-
-# # Keep the aggregate min/max of each metric passing through.
-# [[aggregators.minmax]]
-# ## General Aggregator Arguments:
-# ## The period on which to flush & clear the aggregator.
-# # period = "30s"
-#
-# ## If true, the original metric will be dropped by the
-# ## aggregator and will not get sent to the output plugins.
-# # drop_original = false
-
-
-# # Keep the aggregate quantiles of each metric passing through.
-# [[aggregators.quantile]]
-# ## General Aggregator Arguments:
-# ## The period on which to flush & clear the aggregator.
-# # period = "30s"
-#
-# ## If true, the original metric will be dropped by the
-# ## aggregator and will not get sent to the output plugins.
-# # drop_original = false
-#
-# ## Quantiles to output in the range [0,1]
-# # quantiles = [0.25, 0.5, 0.75]
-#
-# ## Type of aggregation algorithm
-# ## Supported are:
-# ## "t-digest" -- approximation using centroids, can cope with large number of samples
-# ## "exact R7" -- exact computation also used by Excel or NumPy (Hyndman & Fan 1996 R7)
-# ## "exact R8" -- exact computation (Hyndman & Fan 1996 R8)
-# ## NOTE: Do not use "exact" algorithms with large number of samples
-# ## to not impair performance or memory consumption!
-# # algorithm = "t-digest"
-#
-# ## Compression for approximation (t-digest). The value needs to be
-# ## greater or equal to 1.0. Smaller values will result in more
-# ## performance but less accuracy.
-# # compression = 100.0
-
-
-# # Aggregate metrics using a Starlark script
-# [[aggregators.starlark]]
-# ## The Starlark source can be set as a string in this configuration file, or
-# ## by referencing a file containing the script. Only one source or script
-# ## should be set at once.
-# ##
-# ## Source of the Starlark script.
-# source = '''
-# state = {}
-#
-# def add(metric):
-# state["last"] = metric
-#
-# def push():
-# return state.get("last")
-#
-# def reset():
-# state.clear()
-# '''
-#
-# ## File containing a Starlark script.
-# # script = "/usr/local/bin/myscript.star"
-#
-# ## The constants of the Starlark script.
-# # [aggregators.starlark.constants]
-# # max_size = 10
-# # threshold = 0.75
-# # default_name = "Julia"
-# # debug_mode = true
-
-
-# # Count the occurrence of values in fields.
-# [[aggregators.valuecounter]]
-# ## General Aggregator Arguments:
-# ## The period on which to flush & clear the aggregator.
-# # period = "30s"
-#
-# ## If true, the original metric will be dropped by the
-# ## aggregator and will not get sent to the output plugins.
-# # drop_original = false
-#
-# ## The fields for which the values will be counted
-# fields = ["status"]
-
-
-###############################################################################
-# INPUT PLUGINS #
-###############################################################################
-
-
-# Read metrics about cpu usage
-[[inputs.cpu]]
- ## Whether to report per-cpu stats or not
- percpu = true
- ## Whether to report total system cpu stats or not
- totalcpu = true
- ## If true, collect raw CPU time metrics
- collect_cpu_time = false
- ## If true, compute and report the sum of all non-idle CPU states
- ## NOTE: The resulting 'time_active' field INCLUDES 'iowait'!
- report_active = false
- ## If true and the info is available then add core_id and physical_id tags
- core_tags = false
-
-
-# Read metrics about disk usage by mount point
-[[inputs.disk]]
- ## By default stats will be gathered for all mount points.
- ## Set mount_points will restrict the stats to only the specified mount points.
- # mount_points = ["/"]
-
- ## Ignore mount points by filesystem type.
- ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"]
-
- ## Ignore mount points by mount options.
- ## The 'mount' command reports options of all mounts in parathesis.
- ## Bind mounts can be ignored with the special 'bind' option.
- # ignore_mount_opts = []
-
-
-# Read metrics about disk IO by device
-[[inputs.diskio]]
- ## Devices to collect stats for
- ## Wildcards are supported except for disk synonyms like '/dev/disk/by-id'.
- ## ex. devices = ["sda", "sdb", "vd*", "/dev/disk/by-id/nvme-eui.00123deadc0de123"]
- # devices = ["*"]
-
- ## Skip gathering of the disk's serial numbers.
- # skip_serial_number = true
-
- ## Device metadata tags to add on systems supporting it (Linux only)
- ## Use 'udevadm info -q property -n <device>' to get a list of properties.
- ## Note: Most, but not all, udev properties can be accessed this way. Properties
- ## that are currently inaccessible include DEVTYPE, DEVNAME, and DEVPATH.
- # device_tags = ["ID_FS_TYPE", "ID_FS_USAGE"]
-
- ## Using the same metadata source as device_tags, you can also customize the
- ## name of the device via templates.
- ## The 'name_templates' parameter is a list of templates to try and apply to
- ## the device. The template may contain variables in the form of '$PROPERTY' or
- ## '${PROPERTY}'. The first template which does not contain any variables not
- ## present for the device is used as the device name tag.
- ## The typical use case is for LVM volumes, to get the VG/LV name instead of
- ## the near-meaningless DM-0 name.
- # name_templates = ["$ID_FS_LABEL","$DM_VG_NAME/$DM_LV_NAME"]
-
-
-# Plugin to collect various Linux kernel statistics.
-# This plugin ONLY supports Linux
-[[inputs.kernel]]
- ## Additional gather options
- ## Possible options include:
- ## * ksm - kernel same-page merging
- ## * psi - pressure stall information
- # collect = []
-
-
-# Read metrics about memory usage
-[[inputs.mem]]
- # no configuration
-
-
-# Get the number of processes and group them by status
-# This plugin ONLY supports non-Windows
-[[inputs.processes]]
- ## Use sudo to run ps command on *BSD systems. Linux systems will read
- ## /proc, so this does not apply there.
- # use_sudo = false
-
-
-# Read metrics about swap memory usage
-[[inputs.swap]]
- # no configuration
-
-
-# Read metrics about system load & uptime
-[[inputs.system]]
- # no configuration
-
-
-# # Gather ActiveMQ metrics
-# [[inputs.activemq]]
-# ## ActiveMQ WebConsole URL
-# url = "http://127.0.0.1:8161"
-#
-# ## Credentials for basic HTTP authentication
-# # username = "admin"
-# # password = "admin"
-#
-# ## Required ActiveMQ webadmin root path
-# # webadmin = "admin"
-#
-# ## Maximum time to receive response.
-# # response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# ## DEPRECATED: The "aerospike" plugin is deprecated in version 1.30.0 and will be removed in 1.40.0, use 'inputs.prometheus' with the Aerospike Prometheus Exporter instead.
-# # Read stats from aerospike server(s)
-# [[inputs.aerospike]]
-# ## Aerospike servers to connect to (with port)
-# ## This plugin will query all namespaces the aerospike
-# ## server has configured and get stats for them.
-# servers = ["localhost:3000"]
-#
-# # username = "telegraf"
-# # password = "pa$$word"
-#
-# ## Optional TLS Config
-# # enable_tls = false
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# # tls_name = "tlsname"
-# ## If false, skip chain & host verification
-# # insecure_skip_verify = true
-#
-# # Feature Options
-# # Add namespace variable to limit the namespaces executed on
-# # Leave blank to do all
-# # disable_query_namespaces = true # default false
-# # namespaces = ["namespace1", "namespace2"]
-#
-# # Enable set level telemetry
-# # query_sets = true # default: false
-# # Add namespace set combinations to limit sets executed on
-# # Leave blank to do all sets
-# # sets = ["namespace1/set1", "namespace1/set2", "namespace3"]
-#
-# # Histograms
-# # enable_ttl_histogram = true # default: false
-# # enable_object_size_linear_histogram = true # default: false
-#
-# # by default, aerospike produces a 100 bucket histogram
-# # this is not great for most graphing tools, this will allow
-# # the ability to squash this to a smaller number of buckets
-# # To have a balanced histogram, the number of buckets chosen
-# # should divide evenly into 100.
-# # num_histogram_buckets = 100 # default: 10
-
-
-# # Read Apache status information (mod_status)
-# [[inputs.apache]]
-# ## An array of URLs to gather from, must be directed at the machine
-# ## readable version of the mod_status page including the auto query string.
-# ## Default is "http://localhost/server-status?auto".
-# urls = ["http://localhost/server-status?auto"]
-#
-# ## Credentials for basic HTTP authentication.
-# # username = "myuser"
-# # password = "mypassword"
-#
-# ## Maximum time to receive response.
-# # response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Monitor APC UPSes connected to apcupsd
-# [[inputs.apcupsd]]
-# # A list of running apcupsd server to connect to.
-# # If not provided will default to tcp://127.0.0.1:3551
-# servers = ["tcp://127.0.0.1:3551"]
-#
-# ## Timeout for dialing server.
-# timeout = "5s"
-
-
-# # Gather metrics from Apache Aurora schedulers
-# [[inputs.aurora]]
-# ## Schedulers are the base addresses of your Aurora Schedulers
-# schedulers = ["http://127.0.0.1:8081"]
-#
-# ## Set of role types to collect metrics from.
-# ##
-# ## The scheduler roles are checked each interval by contacting the
-# ## scheduler nodes; zookeeper is not contacted.
-# # roles = ["leader", "follower"]
-#
-# ## Timeout is the max time for total network operations.
-# # timeout = "5s"
-#
-# ## Username and password are sent using HTTP Basic Auth.
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Gather Azure resources metrics from Azure Monitor API
-# [[inputs.azure_monitor]]
-# # can be found under Overview->Essentials in the Azure portal for your application/service
-# subscription_id = "<<SUBSCRIPTION_ID>>"
-# # can be obtained by registering an application under Azure Active Directory
-# client_id = "<<CLIENT_ID>>"
-# # can be obtained by registering an application under Azure Active Directory.
-# # If not specified Default Azure Credentials chain will be attempted:
-# # - Environment credentials (AZURE_*)
-# # - Workload Identity in Kubernetes cluster
-# # - Managed Identity
-# # - Azure CLI auth
-# # - Developer Azure CLI auth
-# client_secret = "<<CLIENT_SECRET>>"
-# # can be found under Azure Active Directory->Properties
-# tenant_id = "<<TENANT_ID>>"
-# # Define the optional Azure cloud option e.g. AzureChina, AzureGovernment or AzurePublic. The default is AzurePublic.
-# # cloud_option = "AzurePublic"
-#
-# # resource target #1 to collect metrics from
-# [[inputs.azure_monitor.resource_target]]
-# # can be found under Overview->Essentials->JSON View in the Azure portal for your application/service
-# # must start with 'resourceGroups/...' ('/subscriptions/xxxxxxxx-xxxx-xxxx-xxx-xxxxxxxxxxxx'
-# # must be removed from the beginning of Resource ID property value)
-# resource_id = "<<RESOURCE_ID>>"
-# # the metric names to collect
-# # leave the array empty to use all metrics available to this resource
-# metrics = [ "<<METRIC>>", "<<METRIC>>" ]
-# # metrics aggregation type value to collect
-# # can be 'Total', 'Count', 'Average', 'Minimum', 'Maximum'
-# # leave the array empty to collect all aggregation types values for each metric
-# aggregations = [ "<<AGGREGATION>>", "<<AGGREGATION>>" ]
-#
-# # resource target #2 to collect metrics from
-# [[inputs.azure_monitor.resource_target]]
-# resource_id = "<<RESOURCE_ID>>"
-# metrics = [ "<<METRIC>>", "<<METRIC>>" ]
-# aggregations = [ "<<AGGREGATION>>", "<<AGGREGATION>>" ]
-#
-# # resource group target #1 to collect metrics from resources under it with resource type
-# [[inputs.azure_monitor.resource_group_target]]
-# # the resource group name
-# resource_group = "<<RESOURCE_GROUP_NAME>>"
-#
-# # defines the resources to collect metrics from
-# [[inputs.azure_monitor.resource_group_target.resource]]
-# # the resource type
-# resource_type = "<<RESOURCE_TYPE>>"
-# metrics = [ "<<METRIC>>", "<<METRIC>>" ]
-# aggregations = [ "<<AGGREGATION>>", "<<AGGREGATION>>" ]
-#
-# # defines the resources to collect metrics from
-# [[inputs.azure_monitor.resource_group_target.resource]]
-# resource_type = "<<RESOURCE_TYPE>>"
-# metrics = [ "<<METRIC>>", "<<METRIC>>" ]
-# aggregations = [ "<<AGGREGATION>>", "<<AGGREGATION>>" ]
-#
-# # resource group target #2 to collect metrics from resources under it with resource type
-# [[inputs.azure_monitor.resource_group_target]]
-# resource_group = "<<RESOURCE_GROUP_NAME>>"
-#
-# [[inputs.azure_monitor.resource_group_target.resource]]
-# resource_type = "<<RESOURCE_TYPE>>"
-# metrics = [ "<<METRIC>>", "<<METRIC>>" ]
-# aggregations = [ "<<AGGREGATION>>", "<<AGGREGATION>>" ]
-#
-# # subscription target #1 to collect metrics from resources under it with resource type
-# [[inputs.azure_monitor.subscription_target]]
-# resource_type = "<<RESOURCE_TYPE>>"
-# metrics = [ "<<METRIC>>", "<<METRIC>>" ]
-# aggregations = [ "<<AGGREGATION>>", "<<AGGREGATION>>" ]
-#
-# # subscription target #2 to collect metrics from resources under it with resource type
-# [[inputs.azure_monitor.subscription_target]]
-# resource_type = "<<RESOURCE_TYPE>>"
-# metrics = [ "<<METRIC>>", "<<METRIC>>" ]
-# aggregations = [ "<<AGGREGATION>>", "<<AGGREGATION>>" ]
-
-
-# # Gather Azure Storage Queue metrics
-# [[inputs.azure_storage_queue]]
-# ## Azure Storage Account name and shared access key (required)
-# account_name = "mystorageaccount"
-# account_key = "storageaccountaccesskey"
-#
-# ## Disable peeking age of oldest message (faster)
-# # peek_oldest_message_age = true
-
-
-# # Read metrics of bcache from stats_total and dirty_data
-# # This plugin ONLY supports Linux
-# [[inputs.bcache]]
-# ## Bcache sets path
-# ## If not specified, then default is:
-# bcachePath = "/sys/fs/bcache"
-#
-# ## By default, Telegraf gather stats for all bcache devices
-# ## Setting devices will restrict the stats to the specified
-# ## bcache devices.
-# bcacheDevs = ["bcache0"]
-
-
-# # Collects Beanstalkd server and tubes stats
-# [[inputs.beanstalkd]]
-# ## Server to collect data from
-# server = "localhost:11300"
-#
-# ## List of tubes to gather stats about.
-# ## If no tubes specified then data gathered for each tube on server reported by list-tubes command
-# tubes = ["notifications"]
-
-
-# # Read metrics exposed by Beat
-# [[inputs.beat]]
-# ## An URL from which to read Beat-formatted JSON
-# ## Default is "http://127.0.0.1:5066".
-# url = "http://127.0.0.1:5066"
-#
-# ## Enable collection of the listed stats
-# ## An empty list means collect all. Available options are currently
-# ## "beat", "libbeat", "system" and "filebeat".
-# # include = ["beat", "libbeat", "filebeat"]
-#
-# ## HTTP method
-# # method = "GET"
-#
-# ## Optional HTTP headers
-# # headers = {"X-Special-Header" = "Special-Value"}
-#
-# ## Override HTTP "Host" header
-# # host_header = "logstash.example.com"
-#
-# ## Timeout for HTTP requests
-# # timeout = "5s"
-#
-# ## Optional HTTP Basic Auth credentials
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read BIND nameserver XML statistics
-# [[inputs.bind]]
-# ## An array of BIND XML statistics URI to gather stats.
-# ## Default is "http://localhost:8053/xml/v3".
-# # urls = ["http://localhost:8053/xml/v3"]
-# # gather_memory_contexts = false
-# # gather_views = false
-#
-# ## Report xml v3 counters as integers instead of unsigned for backward
-# ## compatibility. Set this to false as soon as possible!
-# ## Values are clipped if exceeding the integer range.
-# # report_counters_as_int = true
-#
-# ## Timeout for http requests made by bind nameserver
-# # timeout = "4s"
-
-
-# # Collect bond interface status, slaves statuses and failures count
-# [[inputs.bond]]
-# ## Sets 'proc' directory path
-# ## If not specified, then default is /proc
-# # host_proc = "/proc"
-#
-# ## Sets 'sys' directory path
-# ## If not specified, then default is /sys
-# # host_sys = "/sys"
-#
-# ## By default, telegraf gather stats for all bond interfaces
-# ## Setting interfaces will restrict the stats to the specified
-# ## bond interfaces.
-# # bond_interfaces = ["bond0"]
-#
-# ## Tries to collect additional bond details from /sys/class/net/{bond}
-# ## currently only useful for LACP (mode 4) bonds
-# # collect_sys_details = false
-
-
-# # Collect Kafka topics and consumers status from Burrow HTTP API.
-# [[inputs.burrow]]
-# ## Burrow API endpoints in format "schema://host:port".
-# ## Default is "http://localhost:8000".
-# servers = ["http://localhost:8000"]
-#
-# ## Override Burrow API prefix.
-# ## Useful when Burrow is behind reverse-proxy.
-# # api_prefix = "/v3/kafka"
-#
-# ## Maximum time to receive response.
-# # response_timeout = "5s"
-#
-# ## Limit per-server concurrent connections.
-# ## Useful in case of large number of topics or consumer groups.
-# # concurrent_connections = 20
-#
-# ## Filter clusters, default is no filtering.
-# ## Values can be specified as glob patterns.
-# # clusters_include = []
-# # clusters_exclude = []
-#
-# ## Filter consumer groups, default is no filtering.
-# ## Values can be specified as glob patterns.
-# # groups_include = []
-# # groups_exclude = []
-#
-# ## Filter topics, default is no filtering.
-# ## Values can be specified as glob patterns.
-# # topics_include = []
-# # topics_exclude = []
-#
-# ## Credentials for basic HTTP authentication.
-# # username = ""
-# # password = ""
-#
-# ## Optional SSL config
-# # ssl_ca = "/etc/telegraf/ca.pem"
-# # ssl_cert = "/etc/telegraf/cert.pem"
-# # ssl_key = "/etc/telegraf/key.pem"
-# # insecure_skip_verify = false
-
-
-# # Collects performance metrics from the MON, OSD, MDS and RGW nodes
-# # in a Ceph storage cluster.
-# [[inputs.ceph]]
-# ## This is the recommended interval to poll. Too frequent and you
-# ## will lose data points due to timeouts during rebalancing and recovery
-# interval = '1m'
-#
-# ## All configuration values are optional, defaults are shown below
-#
-# ## location of ceph binary
-# ceph_binary = "/usr/bin/ceph"
-#
-# ## directory in which to look for socket files
-# socket_dir = "/var/run/ceph"
-#
-# ## prefix of MON and OSD socket files, used to determine socket type
-# mon_prefix = "ceph-mon"
-# osd_prefix = "ceph-osd"
-# mds_prefix = "ceph-mds"
-# rgw_prefix = "ceph-client"
-#
-# ## suffix used to identify socket files
-# socket_suffix = "asok"
-#
-# ## Ceph user to authenticate as, ceph will search for the corresponding
-# ## keyring e.g. client.admin.keyring in /etc/ceph, or the explicit path
-# ## defined in the client section of ceph.conf for example:
-# ##
-# ## [client.telegraf]
-# ## keyring = /etc/ceph/client.telegraf.keyring
-# ##
-# ## Consult the ceph documentation for more detail on keyring generation.
-# ceph_user = "client.admin"
-#
-# ## Ceph configuration to use to locate the cluster
-# ceph_config = "/etc/ceph/ceph.conf"
-#
-# ## Whether to gather statistics via the admin socket
-# gather_admin_socket_stats = true
-#
-# ## Whether to gather statistics via ceph commands, requires ceph_user
-# ## and ceph_config to be specified
-# gather_cluster_stats = false
-
-
-# # Read specific statistics per cgroup
-# # This plugin ONLY supports Linux
-# [[inputs.cgroup]]
-# ## Directories in which to look for files, globs are supported.
-# ## Consider restricting paths to the set of cgroups you really
-# ## want to monitor if you have a large number of cgroups, to avoid
-# ## any cardinality issues.
-# # paths = [
-# # "/sys/fs/cgroup/memory",
-# # "/sys/fs/cgroup/memory/child1",
-# # "/sys/fs/cgroup/memory/child2/*",
-# # ]
-# ## cgroup stat fields, as file names, globs are supported.
-# ## these file names are appended to each path from above.
-# # files = ["memory.*usage*", "memory.limit_in_bytes"]
-
-
-# # Pull Metric Statistics from Amazon CloudWatch
-# [[inputs.cloudwatch]]
-# ## Amazon Region
-# region = "us-east-1"
-#
-# ## Amazon Credentials
-# ## Credentials are loaded in the following order
-# ## 1) Web identity provider credentials via STS if role_arn and
-# ## web_identity_token_file are specified
-# ## 2) Assumed credentials via STS if role_arn is specified
-# ## 3) explicit credentials from 'access_key' and 'secret_key'
-# ## 4) shared profile from 'profile'
-# ## 5) environment variables
-# ## 6) shared credentials file
-# ## 7) EC2 Instance Profile
-# # access_key = ""
-# # secret_key = ""
-# # token = ""
-# # role_arn = ""
-# # web_identity_token_file = ""
-# # role_session_name = ""
-# # profile = ""
-# # shared_credential_file = ""
-#
-# ## If you are using CloudWatch cross-account observability, you can
-# ## set IncludeLinkedAccounts to true in a monitoring account
-# ## and collect metrics from the linked source accounts
-# # include_linked_accounts = false
-#
-# ## Endpoint to make request against, the correct endpoint is automatically
-# ## determined and this option should only be set if you wish to override the
-# ## default.
-# ## ex: endpoint_url = "http://localhost:8000"
-# # endpoint_url = ""
-#
-# ## Set http_proxy
-# # use_system_proxy = false
-# # http_proxy_url = "http://localhost:8888"
-#
-# ## The minimum period for Cloudwatch metrics is 1 minute (60s). However not
-# ## all metrics are made available to the 1 minute period. Some are collected
-# ## at 3 minute, 5 minute, or larger intervals.
-# ## See https://aws.amazon.com/cloudwatch/faqs/#monitoring.
-# ## Note that if a period is configured that is smaller than the minimum for a
-# ## particular metric, that metric will not be returned by the Cloudwatch API
-# ## and will not be collected by Telegraf.
-# #
-# ## Requested CloudWatch aggregation Period (required)
-# ## Must be a multiple of 60s.
-# period = "5m"
-#
-# ## Collection Delay (required)
-# ## Must account for metrics availability via CloudWatch API
-# delay = "5m"
-#
-# ## Recommended: use metric 'interval' that is a multiple of 'period' to avoid
-# ## gaps or overlap in pulled data
-# interval = "5m"
-#
-# ## Recommended if "delay" and "period" are both within 3 hours of request
-# ## time. Invalid values will be ignored. Recently Active feature will only
-# ## poll for CloudWatch ListMetrics values that occurred within the last 3h.
-# ## If enabled, it will reduce total API usage of the CloudWatch ListMetrics
-# ## API and require less memory to retain.
-# ## Do not enable if "period" or "delay" is longer than 3 hours, as it will
-# ## not return data more than 3 hours old.
-# ## See https://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/API_ListMetrics.html
-# # recently_active = "PT3H"
-#
-# ## Configure the TTL for the internal cache of metrics.
-# # cache_ttl = "1h"
-#
-# ## Metric Statistic Namespaces, wildcards are allowed
-# # namespaces = ["*"]
-#
-# ## Metric Format
-# ## This determines the format of the produces metrics. 'sparse', the default
-# ## will produce a unique field for each statistic. 'dense' will report all
-# ## statistics will be in a field called value and have a metric_name tag
-# ## defining the name of the statistic. See the plugin README for examples.
-# # metric_format = "sparse"
-#
-# ## Maximum requests per second. Note that the global default AWS rate limit
-# ## is 50 reqs/sec, so if you define multiple namespaces, these should add up
-# ## to a maximum of 50.
-# ## See http://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/cloudwatch_limits.html
-# # ratelimit = 25
-#
-# ## Timeout for http requests made by the cloudwatch client.
-# # timeout = "5s"
-#
-# ## Batch Size
-# ## The size of each batch to send requests to Cloudwatch. 500 is the
-# ## suggested largest size. If a request gets to large (413 errors), consider
-# ## reducing this amount.
-# # batch_size = 500
-#
-# ## Namespace-wide statistic filters. These allow fewer queries to be made to
-# ## cloudwatch.
-# # statistic_include = ["average", "sum", "minimum", "maximum", sample_count"]
-# # statistic_exclude = []
-#
-# ## Metrics to Pull
-# ## Defaults to all Metrics in Namespace if nothing is provided
-# ## Refreshes Namespace available metrics every 1h
-# #[[inputs.cloudwatch.metrics]]
-# # names = ["Latency", "RequestCount"]
-# #
-# # ## Statistic filters for Metric. These allow for retrieving specific
-# # ## statistics for an individual metric.
-# # # statistic_include = ["average", "sum", "minimum", "maximum", sample_count"]
-# # # statistic_exclude = []
-# #
-# # ## Dimension filters for Metric.
-# # ## All dimensions defined for the metric names must be specified in order
-# # ## to retrieve the metric statistics.
-# # ## 'value' has wildcard / 'glob' matching support such as 'p-*'.
-# # [[inputs.cloudwatch.metrics.dimensions]]
-# # name = "LoadBalancerName"
-# # value = "p-example"
-
-
-# # Collects conntrack stats from the configured directories and files.
-# # This plugin ONLY supports Linux
-# [[inputs.conntrack]]
-# ## The following defaults would work with multiple versions of conntrack.
-# ## Note the nf_ and ip_ filename prefixes are mutually exclusive across
-# ## kernel versions, as are the directory locations.
-#
-# ## Look through /proc/net/stat/nf_conntrack for these metrics
-# ## all - aggregated statistics
-# ## percpu - include detailed statistics with cpu tag
-# collect = ["all", "percpu"]
-#
-# ## User-specified directories and files to look through
-# ## Directories to search within for the conntrack files above.
-# ## Missing directories will be ignored.
-# dirs = ["/proc/sys/net/ipv4/netfilter","/proc/sys/net/netfilter"]
-#
-# ## Superset of filenames to look for within the conntrack dirs.
-# ## Missing files will be ignored.
-# files = ["ip_conntrack_count","ip_conntrack_max",
-# "nf_conntrack_count","nf_conntrack_max"]
-
-
-# # Gather health check statuses from services registered in Consul
-# [[inputs.consul]]
-# ## Consul server address
-# # address = "localhost:8500"
-#
-# ## URI scheme for the Consul server, one of "http", "https"
-# # scheme = "http"
-#
-# ## Metric version controls the mapping from Consul metrics into
-# ## Telegraf metrics. Version 2 moved all fields with string values
-# ## to tags.
-# ##
-# ## example: metric_version = 1; deprecated in 1.16
-# ## metric_version = 2; recommended version
-# # metric_version = 1
-#
-# ## ACL token used in every request
-# # token = ""
-#
-# ## HTTP Basic Authentication username and password.
-# # username = ""
-# # password = ""
-#
-# ## Data center to query the health checks from
-# # datacenter = ""
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = true
-#
-# ## Consul checks' tag splitting
-# # When tags are formatted like "key:value" with ":" as a delimiter then
-# # they will be split and reported as proper key:value in Telegraf
-# # tag_delimiter = ":"
-
-
-# # Read metrics from the Consul Agent API
-# [[inputs.consul_agent]]
-# ## URL for the Consul agent
-# # url = "http://127.0.0.1:8500"
-#
-# ## Use auth token for authorization.
-# ## If both are set, an error is thrown.
-# ## If both are empty, no token will be used.
-# # token_file = "/path/to/auth/token"
-# ## OR
-# # token = "a1234567-40c7-9048-7bae-378687048181"
-#
-# ## Set timeout (default 5 seconds)
-# # timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = /path/to/cafile
-# # tls_cert = /path/to/certfile
-# # tls_key = /path/to/keyfile
-
-
-# # Read per-node and per-bucket metrics from Couchbase
-# [[inputs.couchbase]]
-# ## specify servers via a url matching:
-# ## [protocol://][:password]@address[:port]
-# ## e.g.
-# ## http://couchbase-0.example.com/
-# ##
-# ## If no servers are specified, then localhost is used as the host.
-# ## If no protocol is specified, HTTP is used.
-# ## If no port is specified, 8091 is used.
-# servers = ["http://localhost:8091"]
-#
-# ## Filter bucket fields to include only here.
-# # bucket_stats_included = ["quota_percent_used", "ops_per_sec", "disk_fetches", "item_count", "disk_used", "data_used", "mem_used"]
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification (defaults to false)
-# ## If set to false, tls_cert and tls_key are required
-# # insecure_skip_verify = false
-#
-# ## Whether to collect cluster-wide bucket statistics
-# ## It is recommended to disable this in favor of node_stats
-# ## to get a better view of the cluster.
-# # cluster_bucket_stats = true
-#
-# ## Whether to collect bucket stats for each individual node
-# # node_bucket_stats = false
-#
-# ## List of additional stats to collect, choose from:
-# ## * autofailover
-# # additional_stats = []
-
-
-# # Read CouchDB Stats from one or more servers
-# [[inputs.couchdb]]
-# ## Works with CouchDB stats endpoints out of the box
-# ## Multiple Hosts from which to read CouchDB stats:
-# hosts = ["http://localhost:8086/_stats"]
-#
-# ## Use HTTP Basic Authentication.
-# # basic_username = "telegraf"
-# # basic_password = "p@ssw0rd"
-
-
-# # Fetch metrics from a CSGO SRCDS
-# [[inputs.csgo]]
-# ## Specify servers using the following format:
-# ## servers = [
-# ## ["ip1:port1", "rcon_password1"],
-# ## ["ip2:port2", "rcon_password2"],
-# ## ]
-# #
-# ## If no servers are specified, no data will be collected
-# servers = []
-
-
-# # Input plugin for DC/OS metrics
-# [[inputs.dcos]]
-# ## The DC/OS cluster URL.
-# cluster_url = "https://dcos-master-1"
-#
-# ## The ID of the service account.
-# service_account_id = "telegraf"
-# ## The private key file for the service account.
-# service_account_private_key = "/etc/telegraf/telegraf-sa-key.pem"
-#
-# ## Path containing login token. If set, will read on every gather.
-# # token_file = "/home/dcos/.dcos/token"
-#
-# ## In all filter options if both include and exclude are empty all items
-# ## will be collected. Arrays may contain glob patterns.
-# ##
-# ## Node IDs to collect metrics from. If a node is excluded, no metrics will
-# ## be collected for its containers or apps.
-# # node_include = []
-# # node_exclude = []
-# ## Container IDs to collect container metrics from.
-# # container_include = []
-# # container_exclude = []
-# ## Container IDs to collect app metrics from.
-# # app_include = []
-# # app_exclude = []
-#
-# ## Maximum concurrent connections to the cluster.
-# # max_connections = 10
-# ## Maximum time to receive a response from cluster.
-# # response_timeout = "20s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## If false, skip chain & host verification
-# # insecure_skip_verify = true
-#
-# ## Recommended filtering to reduce series cardinality.
-# # [inputs.dcos.tagdrop]
-# # path = ["/var/lib/mesos/slave/slaves/*"]
-
-
-# # Read metrics from one or many disque servers
-# [[inputs.disque]]
-# ## An array of URI to gather stats about. Specify an ip or hostname
-# ## with optional port and password.
-# ## ie disque://localhost, disque://10.10.3.33:18832, 10.0.0.1:10000, etc.
-# ## If no servers are specified, then localhost is used as the host.
-# servers = ["localhost"]
-
-
-# # Provide a native collection for dmsetup based statistics for dm-cache
-# # This plugin ONLY supports Linux
-# [[inputs.dmcache]]
-# ## Whether to report per-device stats or not
-# per_device = true
-
-
-# # Query given DNS server and gives statistics
-# [[inputs.dns_query]]
-# ## servers to query
-# servers = ["8.8.8.8"]
-#
-# ## Network is the network protocol name.
-# # network = "udp"
-#
-# ## Domains or subdomains to query.
-# # domains = ["."]
-#
-# ## Query record type.
-# ## Possible values: A, AAAA, CNAME, MX, NS, PTR, TXT, SOA, SPF, SRV.
-# # record_type = "A"
-#
-# ## Dns server port.
-# # port = 53
-#
-# ## Query timeout
-# # timeout = "2s"
-#
-# ## Include the specified additional properties in the resulting metric.
-# ## The following values are supported:
-# ## "first_ip" -- return IP of the first A and AAAA answer
-# ## "all_ips" -- return IPs of all A and AAAA answers
-# # include_fields = []
-
-
-# # Read metrics about dovecot servers
-# [[inputs.dovecot]]
-# ## specify dovecot servers via an address:port list
-# ## e.g.
-# ## localhost:24242
-# ## or as an UDS socket
-# ## e.g.
-# ## /var/run/dovecot/old-stats
-# ##
-# ## If no servers are specified, then localhost is used as the host.
-# servers = ["localhost:24242"]
-#
-# ## Type is one of "user", "domain", "ip", or "global"
-# type = "global"
-#
-# ## Wildcard matches like "*.com". An empty string "" is same as "*"
-# ## If type = "ip" filters should be <IP/network>
-# filters = [""]
-
-
-# # Read metrics about ECS containers
-# [[inputs.ecs]]
-# ## ECS metadata url.
-# ## Metadata v2 API is used if set explicitly. Otherwise,
-# ## v3 metadata endpoint API is used if available.
-# # endpoint_url = ""
-#
-# ## Containers to include and exclude. Globs accepted.
-# ## Note that an empty array for both will include all containers
-# # container_name_include = []
-# # container_name_exclude = []
-#
-# ## Container states to include and exclude. Globs accepted.
-# ## When empty only containers in the "RUNNING" state will be captured.
-# ## Possible values are "NONE", "PULLED", "CREATED", "RUNNING",
-# ## "RESOURCES_PROVISIONED", "STOPPED".
-# # container_status_include = []
-# # container_status_exclude = []
-#
-# ## ecs labels to include and exclude as tags. Globs accepted.
-# ## Note that an empty array for both will include all labels as tags
-# ecs_label_include = [ "com.amazonaws.ecs.*" ]
-# ecs_label_exclude = []
-#
-# ## Timeout for queries.
-# # timeout = "5s"
-
-
-# # Returns ethtool statistics for given interfaces
-# # This plugin ONLY supports Linux
-# [[inputs.ethtool]]
-# ## List of interfaces to pull metrics for
-# # interface_include = ["eth0"]
-#
-# ## List of interfaces to ignore when pulling metrics.
-# # interface_exclude = ["eth1"]
-#
-# ## Plugin behavior for downed interfaces
-# ## Available choices:
-# ## - expose: collect & report metrics for down interfaces
-# ## - skip: ignore interfaces that are marked down
-# # down_interfaces = "expose"
-#
-# ## Reading statistics from interfaces in additional namespaces is also
-# ## supported, so long as the namespaces are named (have a symlink in
-# ## /var/run/netns). The telegraf process will also need the CAP_SYS_ADMIN
-# ## permission.
-# ## By default, only the current namespace will be used. For additional
-# ## namespace support, at least one of `namespace_include` and
-# ## `namespace_exclude` must be provided.
-# ## To include all namespaces, set `namespace_include` to `["*"]`.
-# ## The initial namespace (if anonymous) can be specified with the empty
-# ## string ("").
-#
-# ## List of namespaces to pull metrics for
-# # namespace_include = []
-#
-# ## List of namespace to ignore when pulling metrics.
-# # namespace_exclude = []
-#
-# ## Some drivers declare statistics with extra whitespace, different spacing,
-# ## and mix cases. This list, when enabled, can be used to clean the keys.
-# ## Here are the current possible normalizations:
-# ## * snakecase: converts fooBarBaz to foo_bar_baz
-# ## * trim: removes leading and trailing whitespace
-# ## * lower: changes all capitalized letters to lowercase
-# ## * underscore: replaces spaces with underscores
-# # normalize_keys = ["snakecase", "trim", "lower", "underscore"]
-
-
-# # Read metrics from one or more commands that can output to stdout
-# [[inputs.exec]]
-# ## Commands array
-# commands = []
-#
-# ## Environment variables
-# ## Array of "key=value" pairs to pass as environment variables
-# ## e.g. "KEY=value", "USERNAME=John Doe",
-# ## "LD_LIBRARY_PATH=/opt/custom/lib64:/usr/local/libs"
-# # environment = []
-#
-# ## Timeout for each command to complete.
-# # timeout = "5s"
-#
-# ## Measurement name suffix
-# ## Used for separating different commands
-# # name_suffix = ""
-#
-# ## Ignore Error Code
-# ## If set to true, a non-zero error code in not considered an error and the
-# ## plugin will continue to parse the output.
-# # ignore_error = false
-#
-# ## Data format
-# ## By default, exec expects JSON. This was done for historical reasons and is
-# ## different than other inputs that use the influx line protocol. Each data
-# ## format has its own unique set of configuration options, read more about
-# ## them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# # data_format = "json"
-
-
-# # Read metrics from fail2ban.
-# [[inputs.fail2ban]]
-# ## Use sudo to run fail2ban-client
-# # use_sudo = false
-#
-# ## Use the given socket instead of the default one
-# # socket = "/var/run/fail2ban/fail2ban.sock"
-
-
-# # Read devices value(s) from a Fibaro controller
-# [[inputs.fibaro]]
-# ## Required Fibaro controller address/hostname.
-# ## Note: at the time of writing this plugin, Fibaro only implemented http - no https available
-# url = "http://<controller>:80"
-#
-# ## Required credentials to access the API (http://<controller/api/<component>)
-# username = "<username>"
-# password = "<password>"
-#
-# ## Amount of time allowed to complete the HTTP request
-# # timeout = "5s"
-#
-# ## Fibaro Device Type
-# ## By default, this plugin will attempt to read using the HC2 API. For HC3
-# ## devices, set this to "HC3"
-# # device_type = "HC2"
-
-
-# # Parse a complete file each interval
-# [[inputs.file]]
-# ## Files to parse each interval. Accept standard unix glob matching rules,
-# ## as well as ** to match recursive files and directories.
-# files = ["/tmp/metrics.out"]
-#
-# ## Character encoding to use when interpreting the file contents. Invalid
-# ## characters are replaced using the unicode replacement character. When set
-# ## to the empty string the data is not decoded to text.
-# ## ex: character_encoding = "utf-8"
-# ## character_encoding = "utf-16le"
-# ## character_encoding = "utf-16be"
-# ## character_encoding = ""
-# # character_encoding = ""
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-#
-# ## Please use caution when using the following options: when file name
-# ## variation is high, this can increase the cardinality significantly. Read
-# ## more about cardinality here:
-# ## https://docs.influxdata.com/influxdb/cloud/reference/glossary/#series-cardinality
-#
-# ## Name of tag to store the name of the file. Disabled if not set.
-# # file_tag = ""
-#
-# ## Name of tag to store the absolute path and name of the file. Disabled if
-# ## not set.
-# # file_path_tag = ""
-
-
-# # Count files in a directory
-# [[inputs.filecount]]
-# ## Directories to gather stats about.
-# ## This accept standard unit glob matching rules, but with the addition of
-# ## ** as a "super asterisk". ie:
-# ## /var/log/** -> recursively find all directories in /var/log and count files in each directories
-# ## /var/log/*/* -> find all directories with a parent dir in /var/log and count files in each directories
-# ## /var/log -> count all files in /var/log and all of its subdirectories
-# directories = ["/var/cache/apt", "/tmp"]
-#
-# ## Only count files that match the name pattern. Defaults to "*".
-# name = "*"
-#
-# ## Count files in subdirectories. Defaults to true.
-# recursive = true
-#
-# ## Only count regular files. Defaults to true.
-# regular_only = true
-#
-# ## Follow all symlinks while walking the directory tree. Defaults to false.
-# follow_symlinks = false
-#
-# ## Only count files that are at least this size. If size is
-# ## a negative number, only count files that are smaller than the
-# ## absolute value of size. Acceptable units are B, KiB, MiB, KB, ...
-# ## Without quotes and units, interpreted as size in bytes.
-# size = "0B"
-#
-# ## Only count files that have not been touched for at least this
-# ## duration. If mtime is negative, only count files that have been
-# ## touched in this duration. Defaults to "0s".
-# mtime = "0s"
-
-
-# # Read stats about given file(s)
-# [[inputs.filestat]]
-# ## Files to gather stats about.
-# ## These accept standard unix glob matching rules, but with the addition of
-# ## ** as a "super asterisk". See https://github.com/gobwas/glob.
-# files = ["/etc/telegraf/telegraf.conf", "/var/log/**.log"]
-#
-# ## If true, read the entire file and calculate an md5 checksum.
-# md5 = false
-
-
-# # Read real time temps from fireboard.io servers
-# [[inputs.fireboard]]
-# ## Specify auth token for your account
-# auth_token = "invalidAuthToken"
-# ## You can override the fireboard server URL if necessary
-# # url = https://fireboard.io/api/v1/devices.json
-# ## You can set a different http_timeout if you need to
-# ## You should set a string using an number and time indicator
-# ## for example "12s" for 12 seconds.
-# # http_timeout = "4s"
-
-
-# # Read metrics exposed by fluentd in_monitor plugin
-# [[inputs.fluentd]]
-# ## This plugin reads information exposed by fluentd (using /api/plugins.json endpoint).
-# ##
-# ## Endpoint:
-# ## - only one URI is allowed
-# ## - https is not supported
-# endpoint = "http://localhost:24220/api/plugins.json"
-#
-# ## Define which plugins have to be excluded (based on "type" field - e.g. monitor_agent)
-# exclude = [
-# "monitor_agent",
-# "dummy",
-# ]
-
-
-# # Gather fritzbox status
-# [[inputs.fritzbox]]
-# ## URLs of the devices to query including login credentials
-#
-# ## The information to collect (see README for further details).
-# # collect = [
-# # "device",
-# # "wan",
-# # "ppp",
-# # "dsl",
-# # "wlan",
-# # ]
-#
-# ## The http timeout to use.
-# # timeout = "10s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# # tls_key_pwd = "secret"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Gather repository information from GitHub hosted repositories.
-# [[inputs.github]]
-# ## List of repositories to monitor
-# repositories = [
-# "influxdata/telegraf",
-# "influxdata/influxdb"
-# ]
-#
-# ## Github API access token. Unauthenticated requests are limited to 60 per hour.
-# # access_token = ""
-#
-# ## Github API enterprise url. Github Enterprise accounts must specify their base url.
-# # enterprise_base_url = ""
-#
-# ## Timeout for HTTP requests.
-# # http_timeout = "5s"
-#
-# ## List of additional fields to query.
-# ## NOTE: Getting those fields might involve issuing additional API-calls, so please
-# ## make sure you do not exceed the rate-limit of GitHub.
-# ##
-# ## Available fields are:
-# ## - pull-requests -- number of open and closed pull requests (2 API-calls per repository)
-# # additional_fields = []
-
-
-# # Gather metrics by iterating the files located on a Cloud Storage Bucket.
-# [[inputs.google_cloud_storage]]
-# ## Required. Name of Cloud Storage bucket to ingest metrics from.
-# bucket = "my-bucket"
-#
-# ## Optional. Prefix of Cloud Storage bucket keys to list metrics from.
-# # key_prefix = "my-bucket"
-#
-# ## Key that will store the offsets in order to pick up where the ingestion was left.
-# offset_key = "offset_key"
-#
-# ## Key that will store the offsets in order to pick up where the ingestion was left.
-# objects_per_iteration = 10
-#
-# ## Required. Data format to consume.
-# ## Each data format has its own unique set of configuration options.
-# ## Read more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-#
-# ## Optional. Filepath for GCP credentials JSON file to authorize calls to
-# ## Google Cloud Storage APIs. If not set explicitly, Telegraf will attempt to use
-# ## Application Default Credentials, which is preferred.
-# # credentials_file = "path/to/my/creds.json"
-
-
-# # Read flattened metrics from one or more GrayLog HTTP endpoints
-# [[inputs.graylog]]
-# ## API endpoint, currently supported API:
-# ##
-# ## - multiple (e.g. http://<host>:9000/api/system/metrics/multiple)
-# ## - namespace (e.g. http://<host>:9000/api/system/metrics/namespace/{namespace})
-# ##
-# ## For namespace endpoint, the metrics array will be ignored for that call.
-# ## Endpoint can contain namespace and multiple type calls.
-# ##
-# ## Please check http://[graylog-server-ip]:9000/api/api-browser for full list
-# ## of endpoints
-# servers = [
-# "http://[graylog-server-ip]:9000/api/system/metrics/multiple",
-# ]
-#
-# ## Set timeout (default 5 seconds)
-# # timeout = "5s"
-#
-# ## Metrics list
-# ## List of metrics can be found on Graylog webservice documentation.
-# ## Or by hitting the web service api at:
-# ## http://[graylog-host]:9000/api/system/metrics
-# metrics = [
-# "jvm.cl.loaded",
-# "jvm.memory.pools.Metaspace.committed"
-# ]
-#
-# ## Username and password
-# username = ""
-# password = ""
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read metrics of HAProxy, via stats socket or http endpoints
-# [[inputs.haproxy]]
-# ## List of stats endpoints. Metrics can be collected from both http and socket
-# ## endpoints. Examples of valid endpoints:
-# ## - http://myhaproxy.com:1936/haproxy?stats
-# ## - https://myhaproxy.com:8000/stats
-# ## - socket:/run/haproxy/admin.sock
-# ## - /run/haproxy/*.sock
-# ## - tcp://127.0.0.1:1936
-# ##
-# ## Server addresses not starting with 'http://', 'https://', 'tcp://' will be
-# ## treated as possible sockets. When specifying local socket, glob patterns are
-# ## supported.
-# servers = ["http://myhaproxy.com:1936/haproxy?stats"]
-#
-# ## By default, some of the fields are renamed from what haproxy calls them.
-# ## Setting this option to true results in the plugin keeping the original
-# ## field names.
-# # keep_field_names = false
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Monitor disks' temperatures using hddtemp
-# [[inputs.hddtemp]]
-# ## By default, telegraf gathers temps data from all disks detected by the
-# ## hddtemp.
-# ##
-# ## Only collect temps from the selected disks.
-# ##
-# ## A * as the device name will return the temperature values of all disks.
-# ##
-# # address = "127.0.0.1:7634"
-# # devices = ["sda", "*"]
-
-
-# # HTTP/HTTPS request given an address a method and a timeout
-# [[inputs.http_response]]
-# ## List of urls to query.
-# # urls = ["http://localhost"]
-#
-# ## Set http_proxy.
-# ## Telegraf uses the system wide proxy settings if it's is not set.
-# # http_proxy = "http://localhost:8888"
-#
-# ## Set response_timeout (default 5 seconds)
-# # response_timeout = "5s"
-#
-# ## HTTP Request Method
-# # method = "GET"
-#
-# ## Whether to follow redirects from the server (defaults to false)
-# # follow_redirects = false
-#
-# ## Optional file with Bearer token
-# ## file content is added as an Authorization header
-# # bearer_token = "/path/to/file"
-#
-# ## Optional HTTP Basic Auth Credentials
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## Optional HTTP Request Body
-# # body = '''
-# # {'fake':'data'}
-# # '''
-#
-# ## Optional HTTP Request Body Form
-# ## Key value pairs to encode and set at URL form. Can be used with the POST
-# ## method + application/x-www-form-urlencoded content type to replicate the
-# ## POSTFORM method.
-# # body_form = { "key": "value" }
-#
-# ## Optional name of the field that will contain the body of the response.
-# ## By default it is set to an empty String indicating that the body's
-# ## content won't be added
-# # response_body_field = ''
-#
-# ## Maximum allowed HTTP response body size in bytes.
-# ## 0 means to use the default of 32MiB.
-# ## If the response body size exceeds this limit a "body_read_error" will
-# ## be raised.
-# # response_body_max_size = "32MiB"
-#
-# ## Optional substring or regex match in body of the response (case sensitive)
-# # response_string_match = "\"service_status\": \"up\""
-# # response_string_match = "ok"
-# # response_string_match = "\".*_status\".?:.?\"up\""
-#
-# ## Expected response status code.
-# ## The status code of the response is compared to this value. If they match,
-# ## the field "response_status_code_match" will be 1, otherwise it will be 0.
-# ## If the expected status code is 0, the check is disabled and the field
-# ## won't be added.
-# # response_status_code = 0
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-# ## Use the given name as the SNI server name on each URL
-# # tls_server_name = ""
-# ## TLS renegotiation method, choose from "never", "once", "freely"
-# # tls_renegotiation_method = "never"
-#
-# ## HTTP Request Headers (all values must be strings)
-# # [inputs.http_response.headers]
-# # Host = "github.com"
-#
-# ## Optional setting to map response http headers into tags
-# ## If the http header is not present on the request, no corresponding tag will
-# ## be added. If multiple instances of the http header are present, only the
-# ## first value will be used.
-# # http_header_tags = {"HTTP_HEADER" = "TAG_NAME"}
-#
-# ## Interface to use when dialing an address
-# # interface = "eth0"
-#
-# ## Optional Cookie authentication
-# # cookie_auth_url = "https://localhost/authMe"
-# # cookie_auth_method = "POST"
-# # cookie_auth_username = "username"
-# # cookie_auth_password = "pa$$word"
-# # cookie_auth_body = '{"username": "user", "password": "pa$$word", "authenticate": "me"}'
-# ## cookie_auth_renewal not set or set to "0" will auth once and never renew the cookie
-# # cookie_auth_renewal = "5m"
-
-
-# # Gather smart home status from Hue Bridge
-# [[inputs.huebridge]]
-# ## URL of bridges to query in the form <scheme>://<bridge id>:<user name>@<address>/
-# ## See documentation for available schemes.
-# bridges = [ "address://<bridge id>:<user name>@<bridge hostname or address>/" ]
-#
-# ## Manual device to room assignments to apply during status evaluation.
-# ## E.g. for motion sensors which are reported without a room assignment.
-# # room_assignments = { "Motion sensor 1" = "Living room", "Motion sensor 2" = "Corridor" }
-#
-# ## Timeout for gathering information
-# # timeout = "10s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# # tls_key_pwd = "secret"
-# ## Use TLS but skip chain & host verification
-
-
-# # Gathers huge pages measurements.
-# # This plugin ONLY supports Linux
-# [[inputs.hugepages]]
-# ## Supported huge page types:
-# ## - "root" - based on root huge page control directory:
-# ## /sys/kernel/mm/hugepages
-# ## - "per_node" - based on per NUMA node directories:
-# ## /sys/devices/system/node/node[0-9]*/hugepages
-# ## - "meminfo" - based on /proc/meminfo file
-# # types = ["root", "per_node"]
-
-
-# # Gather Icinga2 status
-# [[inputs.icinga2]]
-# ## Required Icinga2 server address
-# # server = "https://localhost:5665"
-#
-# ## Collected Icinga2 objects ("services", "hosts")
-# ## Specify at least one object to collect from /v1/objects endpoint.
-# # objects = ["services"]
-#
-# ## Collect metrics from /v1/status endpoint
-# ## Choose from:
-# ## "ApiListener", "CIB", "IdoMysqlConnection", "IdoPgsqlConnection"
-# # status = []
-#
-# ## Credentials for basic HTTP authentication
-# # username = "admin"
-# # password = "admin"
-#
-# ## Maximum time to receive response.
-# # response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = true
-
-
-# # Gets counters from all InfiniBand cards and ports installed
-# # This plugin ONLY supports Linux
-# [[inputs.infiniband]]
-# # no configuration
-#
-# ## Collect RDMA counters
-# # gather_rdma = false
-
-
-# # Read InfluxDB-formatted JSON metrics from one or more HTTP endpoints
-# [[inputs.influxdb]]
-# ## Works with InfluxDB debug endpoints out of the box,
-# ## but other services can use this format too.
-# ## See the influxdb plugin's README for more details.
-#
-# ## Multiple URLs from which to read InfluxDB-formatted JSON
-# ## Default is "http://localhost:8086/debug/vars".
-# urls = [
-# "http://localhost:8086/debug/vars"
-# ]
-#
-# ## Username and password to send using HTTP Basic Authentication.
-# # username = ""
-# # password = ""
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## http request & header timeout
-# timeout = "5s"
-
-
-# # Intel Baseband Accelerator Input Plugin collects metrics from both dedicated and integrated
-# # Intel devices that provide Wireless Baseband hardware acceleration.
-# # This plugin ONLY supports Linux.
-# [[inputs.intel_baseband]]
-# ## Path to socket exposed by pf-bb-config for CLI interaction (mandatory).
-# ## In version v23.03 of pf-bb-config the path is created according to the schema:
-# ## "/tmp/pf_bb_config.0000\:<b>\:<d>.<f>.sock" where 0000\:<b>\:<d>.<f> is the PCI device ID.
-# socket_path = ""
-#
-# ## Path to log file exposed by pf-bb-config with telemetry to read (mandatory).
-# ## In version v23.03 of pf-bb-config the path is created according to the schema:
-# ## "/var/log/pf_bb_cfg_0000\:<b>\:<d>.<f>.log" where 0000\:<b>\:<d>.<f> is the PCI device ID.
-# log_file_path = ""
-#
-# ## Specifies plugin behavior regarding unreachable socket (which might not have been initialized yet).
-# ## Available choices:
-# ## - error: Telegraf will return an error on startup if socket is unreachable
-# ## - ignore: Telegraf will ignore error regarding unreachable socket on both startup and gather
-# # unreachable_socket_behavior = "error"
-#
-# ## Duration that defines how long the connected socket client will wait for
-# ## a response before terminating connection.
-# ## Since it's local socket access to a fast packet processing application, the timeout should
-# ## be sufficient for most users.
-# ## Setting the value to 0 disables the timeout (not recommended).
-# # socket_access_timeout = "1s"
-#
-# ## Duration that defines maximum time plugin will wait for pf-bb-config to write telemetry to the log file.
-# ## Timeout may differ depending on the environment.
-# ## Must be equal or larger than 50ms.
-# # wait_for_telemetry_timeout = "1s"
-
-
-# ## Reads metrics from DPDK using v2 telemetry interface.
-# ## This plugin ONLY supports Linux
-# [[inputs.intel_dlb]]
-# ## Path to DPDK telemetry socket.
-# # socket_path = "/var/run/dpdk/rte/dpdk_telemetry.v2"
-#
-# ## Default eventdev command list, it gathers metrics from socket by given commands.
-# ## Supported options:
-# ## "/eventdev/dev_xstats", "/eventdev/port_xstats",
-# ## "/eventdev/queue_xstats", "/eventdev/queue_links"
-# # eventdev_commands = ["/eventdev/dev_xstats", "/eventdev/port_xstats", "/eventdev/queue_xstats", "/eventdev/queue_links"]
-#
-# ## Detect DLB devices based on device id.
-# ## Currently, only supported and tested device id is `0x2710`.
-# ## Configuration added to support forward compatibility.
-# # dlb_device_types = ["0x2710"]
-#
-# ## Specifies plugin behavior regarding unreachable socket (which might not have been initialized yet).
-# ## Available choices:
-# ## - error: Telegraf will return an error on startup if socket is unreachable
-# ## - ignore: Telegraf will ignore error regarding unreachable socket on both startup and gather
-# # unreachable_socket_behavior = "error"
-
-
-# # Intel Platform Monitoring Technology plugin exposes Intel PMT metrics available through the Intel PMT kernel space.
-# # This plugin ONLY supports Linux.
-# [[inputs.intel_pmt]]
-# ## Filepath to PMT XML within local copies of XML files from PMT repository.
-# ## The filepath should be absolute.
-# spec = "/home/telegraf/Intel-PMT/xml/pmt.xml"
-#
-# ## Enable metrics by their datatype.
-# ## See the Enabling Metrics section in README for more details.
-# ## If empty, all metrics are enabled.
-# ## When used, the alternative option samples_enabled should NOT be used.
-# # datatypes_enabled = []
-#
-# ## Enable metrics by their name.
-# ## See the Enabling Metrics section in README for more details.
-# ## If empty, all metrics are enabled.
-# ## When used, the alternative option datatypes_enabled should NOT be used.
-# # samples_enabled = []
-
-
-# # Collect statistics about itself
-# [[inputs.internal]]
-# ## If true, collect telegraf memory stats.
-# # collect_memstats = true
-#
-# ## If true, collect metrics from Go's runtime.metrics. For a full list see:
-# ## https://pkg.go.dev/runtime/metrics
-# # collect_gostats = false
-#
-# ## Collect statistics per plugin instance and not per plugin type
-# # per_instance = false
-
-
-# # Monitors internet speed using speedtest.net service
-# [[inputs.internet_speed]]
-# ## This plugin downloads many MB of data each time it is run. As such
-# ## consider setting a higher interval for this plugin to reduce the
-# ## demand on your internet connection.
-# # interval = "60m"
-#
-# ## Enable to reduce memory usage
-# # memory_saving_mode = false
-#
-# ## Caches the closest server location
-# # cache = false
-#
-# ## Number of concurrent connections
-# ## By default or set to zero, the number of CPU cores is used. Use this to
-# ## reduce the impact on system performance or to increase the connections on
-# ## faster connections to ensure the fastest speed.
-# # connections = 0
-#
-# ## Test mode
-# ## By default, a single sever is used for testing. This may work for most,
-# ## however, setting to "multi" will reach out to multiple servers in an
-# ## attempt to get closer to ideal internet speeds.
-# ## And "multi" will use all available servers to calculate average packet loss.
-# # test_mode = "single"
-#
-# ## Server ID exclude filter
-# ## Allows the user to exclude or include specific server IDs received by
-# ## speedtest-go. Values in the exclude option will be skipped over. Values in
-# ## the include option are the only options that will be picked from.
-# ##
-# ## See the list of servers speedtest-go will return at:
-# ## https://www.speedtest.net/api/js/servers?engine=js&limit=10
-# ##
-# # server_id_exclude = []
-# # server_id_include = []
-
-
-# # This plugin gathers interrupts data from /proc/interrupts and /proc/softirqs.
-# [[inputs.interrupts]]
-# ## When set to true, cpu metrics are tagged with the cpu. Otherwise cpu is
-# ## stored as a field.
-# ##
-# ## The default is false for backwards compatibility, and will be changed to
-# ## true in a future version. It is recommended to set to true on new
-# ## deployments.
-# # cpu_as_tag = false
-#
-# ## To filter which IRQs to collect, make use of tagpass / tagdrop, i.e.
-# # [inputs.interrupts.tagdrop]
-# # irq = [ "NET_RX", "TASKLET" ]
-
-
-# # Read metrics from the bare metal servers via IPMI
-# [[inputs.ipmi_sensor]]
-# ## Specify the path to the ipmitool executable
-# # path = "/usr/bin/ipmitool"
-#
-# ## Use sudo
-# ## Setting 'use_sudo' to true will make use of sudo to run ipmitool.
-# ## Sudo must be configured to allow the telegraf user to run ipmitool
-# ## without a password.
-# # use_sudo = false
-#
-# ## Servers
-# ## Specify one or more servers via a url. If no servers are specified, local
-# ## machine sensor stats will be queried. Uses the format:
-# ## [username[:password]@][protocol[(address)]]
-# ## e.g. root:passwd@lan(127.0.0.1)
-# # servers = ["USERID:PASSW0RD@lan(192.168.1.1)"]
-#
-# ## Session privilege level
-# ## Choose from: CALLBACK, USER, OPERATOR, ADMINISTRATOR
-# # privilege = "ADMINISTRATOR"
-#
-# ## Timeout
-# ## Timeout for the ipmitool command to complete.
-# # timeout = "20s"
-#
-# ## Metric schema version
-# ## See the plugin readme for more information on schema versioning.
-# # metric_version = 1
-#
-# ## Sensors to collect
-# ## Choose from:
-# ## * sdr: default, collects sensor data records
-# ## * chassis_power_status: collects the power status of the chassis
-# ## * dcmi_power_reading: collects the power readings from the Data Center Management Interface
-# # sensors = ["sdr"]
-#
-# ## Hex key
-# ## Optionally provide the hex key for the IMPI connection.
-# # hex_key = ""
-#
-# ## Cache
-# ## If ipmitool should use a cache
-# ## Using a cache can speed up collection times depending on your device.
-# # use_cache = false
-#
-# ## Path to the ipmitools cache file (defaults to OS temp dir)
-# ## The provided path must exist and must be writable
-# # cache_path = ""
-
-
-# # Gather packets and bytes counters from Linux ipsets
-# [[inputs.ipset]]
-# ## By default, we only show sets which have already matched at least 1 packet.
-# ## set include_unmatched_sets = true to gather them all.
-# # include_unmatched_sets = false
-#
-# ## Adjust your sudo settings appropriately if using this option ("sudo ipset save")
-# ## You can avoid using sudo or root, by setting appropriate privileges for
-# ## the telegraf.service systemd service.
-# # use_sudo = false
-#
-# ## Add number of entries and number of individual IPs (resolve CIDR syntax) for each ipset
-# # count_per_ip_entries = false
-#
-# ## The default timeout of 1s for ipset execution can be overridden here:
-# # timeout = "1s"
-
-
-# # Gather packets and bytes throughput from iptables
-# # This plugin ONLY supports Linux
-# [[inputs.iptables]]
-# ## iptables require root access on most systems.
-# ## Setting 'use_sudo' to true will make use of sudo to run iptables.
-# ## Users must configure sudo to allow telegraf user to run iptables with
-# ## no password.
-# ## iptables can be restricted to only list command "iptables -nvL".
-# # use_sudo = false
-#
-# ## Setting 'use_lock' to true runs iptables with the "-w" option.
-# ## Adjust your sudo settings appropriately if using this option
-# ## ("iptables -w 5 -nvl")
-# # use_lock = false
-#
-# ## Define an alternate executable, such as "ip6tables". Default is "iptables".
-# # binary = "ip6tables"
-# ## defines the table to monitor:
-# table = "filter"
-#
-# ## defines the chains to monitor.
-# ## NOTE: iptables rules without a comment will not be monitored.
-# ## Read the plugin documentation for more information.
-# chains = [ "INPUT" ]
-
-
-# # Collect virtual and real server stats from Linux IPVS
-# # This plugin ONLY supports Linux
-# [[inputs.ipvs]]
-# # no configuration
-
-
-# # Read jobs and cluster metrics from Jenkins instances
-# [[inputs.jenkins]]
-# ## The Jenkins URL in the format "schema://host:port"
-# url = "http://my-jenkins-instance:8080"
-# # username = "admin"
-# # password = "admin"
-#
-# ## Set response_timeout
-# response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use SSL but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Optional Max Job Build Age filter
-# ## Default 1 hour, ignore builds older than max_build_age
-# # max_build_age = "1h"
-#
-# ## Optional Sub Job Depth filter
-# ## Jenkins can have unlimited layer of sub jobs
-# ## This config will limit the layers of pulling, default value 0 means
-# ## unlimited pulling until no more sub jobs
-# # max_subjob_depth = 0
-#
-# ## Optional Sub Job Per Layer
-# ## In workflow-multibranch-plugin, each branch will be created as a sub job.
-# ## This config will limit to call only the lasted branches in each layer,
-# ## empty will use default value 10
-# # max_subjob_per_layer = 10
-#
-# ## Jobs to include or exclude from gathering
-# ## When using both lists, job_exclude has priority.
-# ## Wildcards are supported: [ "jobA/*", "jobB/subjob1/*"]
-# # job_include = [ "*" ]
-# # job_exclude = [ ]
-#
-# ## Nodes to include or exclude from gathering
-# ## When using both lists, node_exclude has priority.
-# # node_include = [ "*" ]
-# # node_exclude = [ ]
-#
-# ## Worker pool for jenkins plugin only
-# ## Empty this field will use default value 5
-# # max_connections = 5
-#
-# ## When set to true will add node labels as a comma-separated tag. If none,
-# ## are found, then a tag with the value of 'none' is used. Finally, if a
-# ## label contains a comma it is replaced with an underscore.
-# # node_labels_as_tag = false
-
-
-# # Read JMX metrics from a Jolokia REST agent endpoint
-# [[inputs.jolokia2_agent]]
-# # default_tag_prefix = ""
-# # default_field_prefix = ""
-# # default_field_separator = "."
-#
-# # Add agents URLs to query
-# urls = ["http://localhost:8080/jolokia"]
-# # username = ""
-# # password = ""
-# # response_timeout = "5s"
-#
-# ## Optional origin URL to include as a header in the request. Some endpoints
-# ## may reject an empty origin.
-# # origin = ""
-#
-# ## Optional TLS config
-# # tls_ca = "/var/private/ca.pem"
-# # tls_cert = "/var/private/client.pem"
-# # tls_key = "/var/private/client-key.pem"
-# # insecure_skip_verify = false
-#
-# ## Add metrics to read
-# [[inputs.jolokia2_agent.metric]]
-# name = "java_runtime"
-# mbean = "java.lang:type=Runtime"
-# paths = ["Uptime"]
-
-
-# # Read JMX metrics from a Jolokia REST proxy endpoint
-# [[inputs.jolokia2_proxy]]
-# # default_tag_prefix = ""
-# # default_field_prefix = ""
-# # default_field_separator = "."
-#
-# ## Proxy agent
-# url = "http://localhost:8080/jolokia"
-# # username = ""
-# # password = ""
-# # response_timeout = "5s"
-#
-# ## Optional origin URL to include as a header in the request. Some endpoints
-# ## may reject an empty origin.
-# # origin = ""
-#
-# ## Optional TLS config
-# # tls_ca = "/var/private/ca.pem"
-# # tls_cert = "/var/private/client.pem"
-# # tls_key = "/var/private/client-key.pem"
-# # insecure_skip_verify = false
-#
-# ## Add proxy targets to query
-# # default_target_username = ""
-# # default_target_password = ""
-# [[inputs.jolokia2_proxy.target]]
-# url = "service:jmx:rmi:///jndi/rmi://targethost:9999/jmxrmi"
-# # username = ""
-# # password = ""
-#
-# ## Add metrics to read
-# [[inputs.jolokia2_proxy.metric]]
-# name = "java_runtime"
-# mbean = "java.lang:type=Runtime"
-# paths = ["Uptime"]
-
-
-# # Read Kapacitor-formatted JSON metrics from one or more HTTP endpoints
-# [[inputs.kapacitor]]
-# ## Multiple URLs from which to read Kapacitor-formatted JSON
-# ## Default is "http://localhost:9092/kapacitor/v1/debug/vars".
-# urls = [
-# "http://localhost:9092/kapacitor/v1/debug/vars"
-# ]
-#
-# ## Time limit for http requests
-# timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Get kernel statistics from /proc/vmstat
-# # This plugin ONLY supports Linux
-# [[inputs.kernel_vmstat]]
-# # no configuration
-
-
-# # Read metrics from the Kubernetes api
-# [[inputs.kube_inventory]]
-# ## URL for the Kubernetes API.
-# ## If empty in-cluster config with POD's service account token will be used.
-# # url = ""
-#
-# ## URL for the kubelet, if set it will be used to collect the pods resource metrics
-# # url_kubelet = "http://127.0.0.1:10255"
-#
-# ## Namespace to use. Set to "" to use all namespaces.
-# # namespace = "default"
-#
-# ## Node name to filter to. No filtering by default.
-# # node_name = ""
-#
-# ## Use bearer token for authorization.
-# ## Ignored if url is empty and in-cluster config is used.
-# # bearer_token = "/var/run/secrets/kubernetes.io/serviceaccount/token"
-#
-# ## Set response_timeout (default 5 seconds)
-# # response_timeout = "5s"
-#
-# ## Optional Resources to exclude from gathering
-# ## Leave them with blank with try to gather everything available.
-# ## Values can be - "daemonsets", deployments", "endpoints", "ingress",
-# ## "nodes", "persistentvolumes", "persistentvolumeclaims", "pods", "services",
-# ## "statefulsets"
-# # resource_exclude = [ "deployments", "nodes", "statefulsets" ]
-#
-# ## Optional Resources to include when gathering
-# ## Overrides resource_exclude if both set.
-# # resource_include = [ "deployments", "nodes", "statefulsets" ]
-#
-# ## selectors to include and exclude as tags. Globs accepted.
-# ## Note that an empty array for both will include all selectors as tags
-# ## selector_exclude overrides selector_include if both set.
-# # selector_include = []
-# # selector_exclude = ["*"]
-#
-# ## Optional TLS Config
-# ## Trusted root certificates for server
-# # tls_ca = "/path/to/cafile"
-# ## Used for TLS client certificate authentication
-# # tls_cert = "/path/to/certfile"
-# ## Used for TLS client certificate authentication
-# # tls_key = "/path/to/keyfile"
-# ## Send the specified TLS server name via SNI
-# # tls_server_name = "kubernetes.example.com"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Uncomment to remove deprecated metrics.
-# # fieldexclude = ["terminated_reason"]
-
-
-# # Read metrics from the kubernetes kubelet api
-# [[inputs.kubernetes]]
-# ## URL for the kubelet, if empty read metrics from all nodes in the cluster
-# url = "http://127.0.0.1:10255"
-#
-# ## Use bearer token for authorization. ('bearer_token' takes priority)
-# ## If both of these are empty, we'll use the default serviceaccount:
-# ## at: /var/run/secrets/kubernetes.io/serviceaccount/token
-# ##
-# ## To re-read the token at each interval, please use a file with the
-# ## bearer_token option. If given a string, Telegraf will always use that
-# ## token.
-# # bearer_token = "/var/run/secrets/kubernetes.io/serviceaccount/token"
-# ## OR
-# # bearer_token_string = "abc_123"
-#
-# ## Kubernetes Node Metric Name
-# ## The default Kubernetes node metric name (i.e. kubernetes_node) is the same
-# ## for the kubernetes and kube_inventory plugins. To avoid conflicts, set this
-# ## option to a different value.
-# # node_metric_name = "kubernetes_node"
-#
-# ## Pod labels to be added as tags. An empty array for both include and
-# ## exclude will include all labels.
-# # label_include = []
-# # label_exclude = ["*"]
-#
-# ## Set response_timeout (default 5 seconds)
-# # response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = /path/to/cafile
-# # tls_cert = /path/to/certfile
-# # tls_key = /path/to/keyfile
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # LDAP monitoring plugin
-# [[inputs.ldap]]
-# ## Server to monitor
-# ## The scheme determines the mode to use for connection with
-# ## ldap://... -- unencrypted (non-TLS) connection
-# ## ldaps://... -- TLS connection
-# ## starttls://... -- StartTLS connection
-# ## If no port is given, the default ports, 389 for ldap and starttls and
-# ## 636 for ldaps, are used.
-# server = "ldap://localhost"
-#
-# ## Server dialect, can be "openldap" or "389ds"
-# # dialect = "openldap"
-#
-# # DN and password to bind with
-# ## If bind_dn is empty an anonymous bind is performed.
-# bind_dn = ""
-# bind_password = ""
-#
-# ## Reverse the field names constructed from the monitoring DN
-# # reverse_field_names = false
-#
-# ## Optional TLS Config
-# ## Set to true/false to enforce TLS being enabled/disabled. If not set,
-# ## enable TLS only if any of the other options are specified.
-# # tls_enable =
-# ## Trusted root certificates for server
-# # tls_ca = "/path/to/cafile"
-# ## Used for TLS client certificate authentication
-# # tls_cert = "/path/to/certfile"
-# ## Used for TLS client certificate authentication
-# # tls_key = "/path/to/keyfile"
-# ## Password for the key file if it is encrypted
-# # tls_key_pwd = ""
-# ## Send the specified TLS server name via SNI
-# # tls_server_name = "kubernetes.example.com"
-# ## Minimal TLS version to accept by the client
-# # tls_min_version = "TLS12"
-# ## List of ciphers to accept, by default all secure ciphers will be accepted
-# ## See https://pkg.go.dev/crypto/tls#pkg-constants for supported values.
-# ## Use "all", "secure" and "insecure" to add all support ciphers, secure
-# ## suites or insecure suites respectively.
-# # tls_cipher_suites = ["secure"]
-# ## Renegotiation method, "never", "once" or "freely"
-# # tls_renegotiation_method = "never"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read metrics from a LeoFS Server via SNMP
-# [[inputs.leofs]]
-# ## An array of URLs of the form:
-# ## host [ ":" port]
-# servers = ["127.0.0.1:4010"]
-
-
-# # The libvirt plugin collects statistics from virtualized guests using virtualization libvirt API.
-# [[inputs.libvirt]]
-# ## Domain names from which libvirt gather statistics.
-# ## By default (empty or missing array) the plugin gather statistics from each domain registered in the host system.
-# # domains = []
-#
-# ## Libvirt connection URI with hypervisor.
-# ## The plugin supports multiple transport protocols and approaches which are configurable via the URI.
-# ## The general URI form: driver[+transport]://[username@][hostname][:port]/[path][?extraparameters]
-# ## Supported transport protocols: ssh, tcp, tls, unix
-# ## URI examples for each type of transport protocol:
-# ## 1. SSH: qemu+ssh://<USER@IP_OR_HOSTNAME>/system?keyfile=/<PATH_TO_PRIVATE_KEY>&known_hosts=/<PATH_TO_known_hosts>
-# ## 2. TCP: qemu+tcp://<IP_OR_HOSTNAME>/system
-# ## 3. TLS: qemu+tls://<HOSTNAME>/system?pkipath=/certs_dir/<COMMON_LOCATION_OF_CACERT_AND_SERVER_CLIENT_CERTS>
-# ## 4. UNIX: qemu+unix:///system?socket=/<PATH_TO_libvirt-sock>
-# ## Default URI is qemu:///system
-# # libvirt_uri = "qemu:///system"
-#
-# ## Statistics groups for which libvirt plugin will gather statistics.
-# ## Supported statistics groups: state, cpu_total, balloon, vcpu, interface, block, perf, iothread, memory, dirtyrate
-# ## Empty array means no metrics for statistics groups will be exposed by the plugin.
-# ## By default the plugin will gather all available statistics.
-# # statistics_groups = ["state", "cpu_total", "balloon", "vcpu", "interface", "block", "perf", "iothread", "memory", "dirtyrate"]
-#
-# ## A list containing additional statistics to be exposed by libvirt plugin.
-# ## Supported additional statistics: vcpu_mapping
-# ## By default (empty or missing array) the plugin will not collect additional statistics.
-# # additional_statistics = []
-#
-
-
-# # Provides Linux CPU metrics
-# # This plugin ONLY supports Linux
-# [[inputs.linux_cpu]]
-# ## Path for sysfs filesystem.
-# ## See https://www.kernel.org/doc/Documentation/filesystems/sysfs.txt
-# ## Defaults:
-# # host_sys = "/sys"
-#
-# ## CPU metrics collected by the plugin.
-# ## Supported options:
-# ## "cpufreq", "thermal"
-# ## Defaults:
-# # metrics = ["cpufreq"]
-
-
-# # Provides Linux sysctl fs metrics
-# [[inputs.linux_sysctl_fs]]
-# # no configuration
-
-
-# # Read metrics from local Lustre service on OST, MDS
-# # This plugin ONLY supports Linux
-# [[inputs.lustre2]]
-# ## An array of /proc globs to search for Lustre stats
-# ## If not specified, the default will work on Lustre 2.12.x
-# ##
-# # mgs_procfiles = [
-# # "/sys/fs/lustre/mgs/*/eviction_count",
-# # ]
-# # ost_procfiles = [
-# # "/proc/fs/lustre/obdfilter/*/stats",
-# # "/proc/fs/lustre/osd-ldiskfs/*/stats",
-# # "/proc/fs/lustre/obdfilter/*/job_stats",
-# # "/proc/fs/lustre/obdfilter/*/exports/*/stats",
-# # "/proc/fs/lustre/osd-ldiskfs/*/brw_stats",
-# # "/proc/fs/lustre/osd-zfs/*/brw_stats",
-# # "/sys/fs/lustre/odbfilter/*/eviction_count",
-# # ]
-# # mds_procfiles = [
-# # "/proc/fs/lustre/mdt/*/md_stats",
-# # "/proc/fs/lustre/mdt/*/job_stats",
-# # "/proc/fs/lustre/mdt/*/exports/*/stats",
-# # "/proc/fs/lustre/osd-ldiskfs/*/brw_stats",
-# # "/proc/fs/lustre/osd-zfs/*/brw_stats",
-# # "/sys/fs/lustre/mdt/*/eviction_count",
-# # ]
-
-
-# # Read metrics about LVM physical volumes, volume groups, logical volumes.
-# [[inputs.lvm]]
-# ## Use sudo to run LVM commands
-# use_sudo = false
-#
-# ## The default location of the pvs binary can be overridden with:
-# #pvs_binary = "/usr/sbin/pvs"
-#
-# ## The default location of the vgs binary can be overridden with:
-# #vgs_binary = "/usr/sbin/vgs"
-#
-# ## The default location of the lvs binary can be overridden with:
-# #lvs_binary = "/usr/sbin/lvs"
-
-
-# # Gathers metrics from the /3.0/reports MailChimp API
-# [[inputs.mailchimp]]
-# ## MailChimp API key
-# ## get from https://admin.mailchimp.com/account/api/
-# api_key = "" # required
-#
-# ## Reports for campaigns sent more than days_old ago will not be collected.
-# ## 0 means collect all and is the default value.
-# days_old = 0
-#
-# ## Campaign ID to get, if empty gets all campaigns, this option overrides days_old
-# # campaign_id = ""
-
-
-# # Retrieves information on a specific host in a MarkLogic Cluster
-# [[inputs.marklogic]]
-# ## Base URL of the MarkLogic HTTP Server.
-# url = "http://localhost:8002"
-#
-# ## List of specific hostnames to retrieve information. At least (1) required.
-# # hosts = ["hostname1", "hostname2"]
-#
-# ## Using HTTP Basic Authentication. Management API requires 'manage-user' role privileges
-# # username = "myuser"
-# # password = "mypassword"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read metrics from one or many mcrouter servers.
-# [[inputs.mcrouter]]
-# ## An array of address to gather stats about. Specify an ip or hostname
-# ## with port. ie tcp://localhost:11211, tcp://10.0.0.1:11211, etc.
-# servers = ["tcp://localhost:11211", "unix:///var/run/mcrouter.sock"]
-#
-# ## Timeout for metric collections from all servers. Minimum timeout is "1s".
-# # timeout = "5s"
-
-
-# # Get kernel statistics from /proc/mdstat
-# # This plugin ONLY supports Linux
-# [[inputs.mdstat]]
-# ## Sets file path
-# ## If not specified, then default is /proc/mdstat
-# # file_name = "/proc/mdstat"
-
-
-# # Read metrics from one or many memcached servers.
-# [[inputs.memcached]]
-# # An array of address to gather stats about. Specify an ip on hostname
-# # with optional port. ie localhost, 10.0.0.1:11211, etc.
-# servers = ["localhost:11211"]
-# # An array of unix memcached sockets to gather stats about.
-# # unix_sockets = ["/var/run/memcached.sock"]
-#
-# ## Optional TLS Config
-# # enable_tls = false
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## If false, skip chain & host verification
-# # insecure_skip_verify = true
-
-
-# # Telegraf plugin for gathering metrics from N Mesos masters
-# [[inputs.mesos]]
-# ## Timeout, in ms.
-# timeout = 100
-#
-# ## A list of Mesos masters.
-# masters = ["http://localhost:5050"]
-#
-# ## Master metrics groups to be collected, by default, all enabled.
-# master_collections = [
-# "resources",
-# "master",
-# "system",
-# "agents",
-# "frameworks",
-# "framework_offers",
-# "tasks",
-# "messages",
-# "evqueue",
-# "registrar",
-# "allocator",
-# ]
-#
-# ## A list of Mesos slaves, default is []
-# # slaves = []
-#
-# ## Slave metrics groups to be collected, by default, all enabled.
-# # slave_collections = [
-# # "resources",
-# # "agent",
-# # "system",
-# # "executors",
-# # "tasks",
-# # "messages",
-# # ]
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Collects scores from a Minecraft server's scoreboard using the RCON protocol
-# [[inputs.minecraft]]
-# ## Address of the Minecraft server.
-# # server = "localhost"
-#
-# ## Server RCON Port.
-# # port = "25575"
-#
-# ## Server RCON Password.
-# password = ""
-#
-# ## Uncomment to remove deprecated metric components.
-# # tagdrop = ["server"]
-
-
-# # Generate metrics for test and demonstration purposes
-# [[inputs.mock]]
-# ## Set the metric name to use for reporting
-# metric_name = "mock"
-#
-# ## Optional string key-value pairs of tags to add to all metrics
-# # [inputs.mock.tags]
-# # "key" = "value"
-#
-# ## One or more mock data fields *must* be defined.
-# # [[inputs.mock.constant]]
-# # name = "constant"
-# # value = value_of_any_type
-# # [[inputs.mock.random]]
-# # name = "rand"
-# # min = 1.0
-# # max = 6.0
-# # [[inputs.mock.sine_wave]]
-# # name = "wave"
-# # amplitude = 1.0
-# # period = 0.5
-# # phase = 20.0
-# # base_line = 0.0
-# # [[inputs.mock.step]]
-# # name = "plus_one"
-# # start = 0.0
-# # step = 1.0
-# # [[inputs.mock.stock]]
-# # name = "abc"
-# # price = 50.00
-# # volatility = 0.2
-
-
-# # Retrieve data from MODBUS slave devices
-# [[inputs.modbus]]
-# ## Connection Configuration
-# ##
-# ## The plugin supports connections to PLCs via MODBUS/TCP, RTU over TCP, ASCII over TCP or
-# ## via serial line communication in binary (RTU) or readable (ASCII) encoding
-# ##
-# ## Device name
-# name = "Device"
-#
-# ## Slave ID - addresses a MODBUS device on the bus
-# ## Range: 0 - 255 [0 = broadcast; 248 - 255 = reserved]
-# slave_id = 1
-#
-# ## Timeout for each request
-# timeout = "1s"
-#
-# ## Maximum number of retries and the time to wait between retries
-# ## when a slave-device is busy.
-# # busy_retries = 0
-# # busy_retries_wait = "100ms"
-#
-# # TCP - connect via Modbus/TCP
-# controller = "tcp://localhost:502"
-#
-# ## Serial (RS485; RS232)
-# ## For RS485 specific setting check the end of the configuration.
-# ## For unix-like operating systems use:
-# # controller = "file:///dev/ttyUSB0"
-# ## For Windows operating systems use:
-# # controller = "COM1"
-# # baud_rate = 9600
-# # data_bits = 8
-# # parity = "N"
-# # stop_bits = 1
-#
-# ## Transmission mode for Modbus packets depending on the controller type.
-# ## For Modbus over TCP you can choose between "TCP" , "RTUoverTCP" and
-# ## "ASCIIoverTCP".
-# ## For Serial controllers you can choose between "RTU" and "ASCII".
-# ## By default this is set to "auto" selecting "TCP" for ModbusTCP connections
-# ## and "RTU" for serial connections.
-# # transmission_mode = "auto"
-#
-# ## Trace the connection to the modbus device
-# # log_level = "trace"
-#
-# ## Define the configuration schema
-# ## |---register -- define fields per register type in the original style (only supports one slave ID)
-# ## |---request -- define fields on a requests base
-# ## |---metric -- define fields on a metric base
-# configuration_type = "register"
-#
-# ## Exclude the register type tag
-# ## Please note, this will also influence the grouping of metrics as you won't
-# ## see one metric per register type anymore!
-# # exclude_register_type_tag = false
-# ## --- "register" configuration style ---
-#
-# ## Measurements
-# ##
-#
-# ## Digital Variables, Discrete Inputs and Coils
-# ## measurement - the (optional) measurement name, defaults to "modbus"
-# ## name - the variable name
-# ## data_type - the (optional) output type, can be BOOL or UINT16 (default)
-# ## address - variable address
-#
-# discrete_inputs = [
-# { name = "start", address = [0]},
-# { name = "stop", address = [1]},
-# { name = "reset", address = [2]},
-# { name = "emergency_stop", address = [3]},
-# ]
-# coils = [
-# { name = "motor1_run", address = [0]},
-# { name = "motor1_jog", address = [1]},
-# { name = "motor1_stop", address = [2]},
-# ]
-#
-# ## Analog Variables, Input Registers and Holding Registers
-# ## measurement - the (optional) measurement name, defaults to "modbus"
-# ## name - the variable name
-# ## byte_order - the ordering of bytes
-# ## |---AB, ABCD - Big Endian
-# ## |---BA, DCBA - Little Endian
-# ## |---BADC - Mid-Big Endian
-# ## |---CDAB - Mid-Little Endian
-# ## data_type - BIT (single bit of a register)
-# ## INT8L, INT8H, UINT8L, UINT8H (low and high byte variants)
-# ## INT16, UINT16, INT32, UINT32, INT64, UINT64,
-# ## FLOAT16-IEEE, FLOAT32-IEEE, FLOAT64-IEEE (IEEE 754 binary representation)
-# ## FIXED, UFIXED (fixed-point representation on input)
-# ## STRING (byte-sequence converted to string)
-# ## bit - (optional) bit of the register, ONLY valid for BIT type
-# ## scale - the final numeric variable representation
-# ## address - variable address
-#
-# holding_registers = [
-# { name = "power_factor", byte_order = "AB", data_type = "FIXED", scale=0.01, address = [8]},
-# { name = "voltage", byte_order = "AB", data_type = "FIXED", scale=0.1, address = [0]},
-# { name = "energy", byte_order = "ABCD", data_type = "FIXED", scale=0.001, address = [5,6]},
-# { name = "current", byte_order = "ABCD", data_type = "FIXED", scale=0.001, address = [1,2]},
-# { name = "frequency", byte_order = "AB", data_type = "UFIXED", scale=0.1, address = [7]},
-# { name = "power", byte_order = "ABCD", data_type = "UFIXED", scale=0.1, address = [3,4]},
-# { name = "firmware", byte_order = "AB", data_type = "STRING", address = [5, 6, 7, 8, 9, 10, 11, 12]},
-# ]
-# input_registers = [
-# { name = "tank_level", byte_order = "AB", data_type = "INT16", scale=1.0, address = [0]},
-# { name = "tank_ph", byte_order = "AB", data_type = "INT16", scale=1.0, address = [1]},
-# { name = "pump1_speed", byte_order = "ABCD", data_type = "INT32", scale=1.0, address = [3,4]},
-# ]
-#
-# ## --- "request" configuration style ---
-#
-# ## Per request definition
-# ##
-#
-# ## Define a request sent to the device
-# ## Multiple of those requests can be defined. Data will be collated into metrics at the end of data collection.
-# [[inputs.modbus.request]]
-# ## ID of the modbus slave device to query.
-# ## If you need to query multiple slave-devices, create several "request" definitions.
-# slave_id = 1
-#
-# ## Byte order of the data.
-# ## |---ABCD -- Big Endian (Motorola)
-# ## |---DCBA -- Little Endian (Intel)
-# ## |---BADC -- Big Endian with byte swap
-# ## |---CDAB -- Little Endian with byte swap
-# byte_order = "ABCD"
-#
-# ## Type of the register for the request
-# ## Can be "coil", "discrete", "holding" or "input"
-# register = "coil"
-#
-# ## Name of the measurement.
-# ## Can be overridden by the individual field definitions. Defaults to "modbus"
-# # measurement = "modbus"
-#
-# ## Request optimization algorithm.
-# ## |---none -- Do not perform any optimization and use the given layout(default)
-# ## |---shrink -- Shrink requests to actually requested fields
-# ## | by stripping leading and trailing omits
-# ## |---rearrange -- Rearrange request boundaries within consecutive address ranges
-# ## | to reduce the number of requested registers by keeping
-# ## | the number of requests.
-# ## |---max_insert -- Rearrange request keeping the number of extra fields below the value
-# ## provided in "optimization_max_register_fill". It is not necessary to define 'omitted'
-# ## fields as the optimisation will add such field only where needed.
-# # optimization = "none"
-#
-# ## Maximum number register the optimizer is allowed to insert between two fields to
-# ## save requests.
-# ## This option is only used for the 'max_insert' optimization strategy.
-# ## NOTE: All omitted fields are ignored, so this option denotes the effective hole
-# ## size to fill.
-# # optimization_max_register_fill = 50
-#
-# ## Field definitions
-# ## Analog Variables, Input Registers and Holding Registers
-# ## address - address of the register to query. For coil and discrete inputs this is the bit address.
-# ## name *1 - field name
-# ## type *1,2 - type of the modbus field, can be
-# ## BIT (single bit of a register)
-# ## INT8L, INT8H, UINT8L, UINT8H (low and high byte variants)
-# ## INT16, UINT16, INT32, UINT32, INT64, UINT64 and
-# ## FLOAT16, FLOAT32, FLOAT64 (IEEE 754 binary representation)
-# ## STRING (byte-sequence converted to string)
-# ## length *1,2 - (optional) number of registers, ONLY valid for STRING type
-# ## bit *1,2 - (optional) bit of the register, ONLY valid for BIT type
-# ## scale *1,2,4 - (optional) factor to scale the variable with
-# ## output *1,3,4 - (optional) type of resulting field, can be INT64, UINT64 or FLOAT64.
-# ## Defaults to FLOAT64 for numeric fields if "scale" is provided.
-# ## Otherwise the input "type" class is used (e.g. INT* -> INT64).
-# ## measurement *1 - (optional) measurement name, defaults to the setting of the request
-# ## omit - (optional) omit this field. Useful to leave out single values when querying many registers
-# ## with a single request. Defaults to "false".
-# ##
-# ## *1: These fields are ignored if field is omitted ("omit"=true)
-# ## *2: These fields are ignored for both "coil" and "discrete"-input type of registers.
-# ## *3: This field can only be "UINT16" or "BOOL" if specified for both "coil"
-# ## and "discrete"-input type of registers. By default the fields are
-# ## output as zero or one in UINT16 format unless "BOOL" is used.
-# ## *4: These fields cannot be used with "STRING"-type fields.
-#
-# ## Coil / discrete input example
-# fields = [
-# { address=0, name="motor1_run" },
-# { address=1, name="jog", measurement="motor" },
-# { address=2, name="motor1_stop", omit=true },
-# { address=3, name="motor1_overheating", output="BOOL" },
-# { address=4, name="firmware", type="STRING", length=8 },
-# ]
-#
-# [inputs.modbus.request.tags]
-# machine = "impresser"
-# location = "main building"
-#
-# [[inputs.modbus.request]]
-# ## Holding example
-# ## All of those examples will result in FLOAT64 field outputs
-# slave_id = 1
-# byte_order = "DCBA"
-# register = "holding"
-# fields = [
-# { address=0, name="voltage", type="INT16", scale=0.1 },
-# { address=1, name="current", type="INT32", scale=0.001 },
-# { address=3, name="power", type="UINT32", omit=true },
-# { address=5, name="energy", type="FLOAT32", scale=0.001, measurement="W" },
-# { address=7, name="frequency", type="UINT32", scale=0.1 },
-# { address=8, name="power_factor", type="INT64", scale=0.01 },
-# ]
-#
-# [inputs.modbus.request.tags]
-# machine = "impresser"
-# location = "main building"
-#
-# [[inputs.modbus.request]]
-# ## Input example with type conversions
-# slave_id = 1
-# byte_order = "ABCD"
-# register = "input"
-# fields = [
-# { address=0, name="rpm", type="INT16" }, # will result in INT64 field
-# { address=1, name="temperature", type="INT16", scale=0.1 }, # will result in FLOAT64 field
-# { address=2, name="force", type="INT32", output="FLOAT64" }, # will result in FLOAT64 field
-# { address=4, name="hours", type="UINT32" }, # will result in UIN64 field
-# ]
-#
-# [inputs.modbus.request.tags]
-# machine = "impresser"
-# location = "main building"
-#
-# ## --- "metric" configuration style ---
-#
-# ## Per metric definition
-# ##
-#
-# ## Request optimization algorithm across metrics
-# ## |---none -- Do not perform any optimization and just group requests
-# ## | within metrics (default)
-# ## |---max_insert -- Collate registers across all defined metrics and fill in
-# ## holes to optimize the number of requests.
-# # optimization = "none"
-#
-# ## Maximum number of registers the optimizer is allowed to insert between
-# ## non-consecutive registers to save requests.
-# ## This option is only used for the 'max_insert' optimization strategy and
-# ## effectively denotes the hole size between registers to fill.
-# # optimization_max_register_fill = 50
-#
-# ## Define a metric produced by the requests to the device
-# ## Multiple of those metrics can be defined. The referenced registers will
-# ## be collated into requests send to the device
-# [[inputs.modbus.metric]]
-# ## ID of the modbus slave device to query
-# ## If you need to query multiple slave-devices, create several "metric" definitions.
-# slave_id = 1
-#
-# ## Byte order of the data
-# ## |---ABCD -- Big Endian (Motorola)
-# ## |---DCBA -- Little Endian (Intel)
-# ## |---BADC -- Big Endian with byte swap
-# ## |---CDAB -- Little Endian with byte swap
-# # byte_order = "ABCD"
-#
-# ## Name of the measurement
-# # measurement = "modbus"
-#
-# ## Field definitions
-# ## register - type of the modbus register, can be "coil", "discrete",
-# ## "holding" or "input". Defaults to "holding".
-# ## address - address of the register to query. For coil and discrete inputs this is the bit address.
-# ## name - field name
-# ## type *1 - type of the modbus field, can be
-# ## BIT (single bit of a register)
-# ## INT8L, INT8H, UINT8L, UINT8H (low and high byte variants)
-# ## INT16, UINT16, INT32, UINT32, INT64, UINT64 and
-# ## FLOAT16, FLOAT32, FLOAT64 (IEEE 754 binary representation)
-# ## STRING (byte-sequence converted to string)
-# ## length *1 - (optional) number of registers, ONLY valid for STRING type
-# ## bit *1,2 - (optional) bit of the register, ONLY valid for BIT type
-# ## scale *1,3 - (optional) factor to scale the variable with
-# ## output *2,3 - (optional) type of resulting field, can be INT64, UINT64 or FLOAT64. Defaults to FLOAT64 if
-# ## "scale" is provided and to the input "type" class otherwise (i.e. INT* -> INT64, etc).
-# ##
-# ## *1: These fields are ignored for both "coil" and "discrete"-input type of registers.
-# ## *2: This field can only be "UINT16" or "BOOL" if specified for both "coil"
-# ## and "discrete"-input type of registers. By default the fields are
-# ## output as zero or one in UINT16 format unless "BOOL" is used.
-# ## *3: These fields cannot be used with "STRING"-type fields.
-# fields = [
-# { register="coil", address=0, name="door_open"},
-# { register="coil", address=1, name="status_ok"},
-# { register="holding", address=0, name="voltage", type="INT16" },
-# { address=1, name="current", type="INT32", scale=0.001 },
-# { address=5, name="energy", type="FLOAT32", scale=0.001 },
-# { address=7, name="frequency", type="UINT32", scale=0.1 },
-# { address=8, name="power_factor", type="INT64", scale=0.01 },
-# { address=9, name="firmware", type="STRING", length=8 },
-# ]
-#
-# ## Tags assigned to the metric
-# # [inputs.modbus.metric.tags]
-# # machine = "impresser"
-# # location = "main building"
-#
-#
-# ## RS485 specific settings. Only take effect for serial controllers.
-# ## Note: This has to be at the end of the modbus configuration due to
-# ## TOML constraints.
-# # [inputs.modbus.rs485]
-# ## Delay RTS prior to sending
-# # delay_rts_before_send = "0ms"
-# ## Delay RTS after to sending
-# # delay_rts_after_send = "0ms"
-# ## Pull RTS line to high during sending
-# # rts_high_during_send = false
-# ## Pull RTS line to high after sending
-# # rts_high_after_send = false
-# ## Enabling receiving (Rx) during transmission (Tx)
-# # rx_during_tx = false
-#
-# ## Enable workarounds required by some devices to work correctly
-# # [inputs.modbus.workarounds]
-# ## Pause after connect delays the first request by the specified time.
-# ## This might be necessary for (slow) devices.
-# # pause_after_connect = "0ms"
-#
-# ## Pause between read requests sent to the device.
-# ## This might be necessary for (slow) serial devices.
-# # pause_between_requests = "0ms"
-#
-# ## Close the connection after every gather cycle.
-# ## Usually the plugin closes the connection after a certain idle-timeout,
-# ## however, if you query a device with limited simultaneous connectivity
-# ## (e.g. serial devices) from multiple instances you might want to only
-# ## stay connected during gather and disconnect afterwards.
-# # close_connection_after_gather = false
-#
-# ## Force the plugin to read each field in a separate request.
-# ## This might be necessary for devices not conforming to the spec,
-# ## see https://github.com/influxdata/telegraf/issues/12071.
-# # one_request_per_field = false
-#
-# ## Enforce the starting address to be zero for the first request on
-# ## coil registers. This is necessary for some devices see
-# ## https://github.com/influxdata/telegraf/issues/8905
-# # read_coils_starting_at_zero = false
-#
-# ## String byte-location in registers AFTER byte-order conversion
-# ## Some device (e.g. EM340) place the string byte in only the upper or
-# ## lower byte location of a register see
-# ## https://github.com/influxdata/telegraf/issues/14748
-# ## Available settings:
-# ## lower -- use only lower byte of the register i.e. 00XX 00XX 00XX 00XX
-# ## upper -- use only upper byte of the register i.e. XX00 XX00 XX00 XX00
-# ## By default both bytes of the register are used i.e. XXXX XXXX.
-# # string_register_location = ""
-
-
-# # Read metrics and status information about processes managed by Monit
-# [[inputs.monit]]
-# ## Monit HTTPD address
-# address = "http://127.0.0.1:2812"
-#
-# ## Username and Password for Monit
-# # username = ""
-# # password = ""
-#
-# ## Amount of time allowed to complete the HTTP request
-# # timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Aggregates the contents of multiple files into a single point
-# [[inputs.multifile]]
-# ## Base directory where telegraf will look for files.
-# ## Omit this option to use absolute paths.
-# base_dir = "/sys/bus/i2c/devices/1-0076/iio:device0"
-#
-# ## If true discard all data when a single file can't be read.
-# ## Else, Telegraf omits the field generated from this file.
-# # fail_early = true
-#
-# ## Files to parse each interval.
-# [[inputs.multifile.file]]
-# file = "in_pressure_input"
-# dest = "pressure"
-# conversion = "float"
-# [[inputs.multifile.file]]
-# file = "in_temp_input"
-# dest = "temperature"
-# conversion = "float(3)"
-# [[inputs.multifile.file]]
-# file = "in_humidityrelative_input"
-# dest = "humidityrelative"
-# conversion = "float(3)"
-
-
-# # Read metrics from one or many mysql servers
-# [[inputs.mysql]]
-# ## specify servers via a url matching:
-# ## [username[:password]@][protocol[(address)]]/[?tls=[true|false|skip-verify|custom]]
-# ## see https://github.com/go-sql-driver/mysql#dsn-data-source-name
-# ## e.g.
-# ## servers = ["user:passwd@tcp(127.0.0.1:3306)/?tls=false"]
-# ## servers = ["user@tcp(127.0.0.1:3306)/?tls=false"]
-# #
-# ## If no servers are specified, then localhost is used as the host.
-# servers = ["tcp(127.0.0.1:3306)/"]
-#
-# ## Selects the metric output format.
-# ##
-# ## This option exists to maintain backwards compatibility, if you have
-# ## existing metrics do not set or change this value until you are ready to
-# ## migrate to the new format.
-# ##
-# ## If you do not have existing metrics from this plugin set to the latest
-# ## version.
-# ##
-# ## Telegraf >=1.6: metric_version = 2
-# ## <1.6: metric_version = 1 (or unset)
-# metric_version = 2
-#
-# ## if the list is empty, then metrics are gathered from all database tables
-# # table_schema_databases = []
-#
-# ## gather metrics from INFORMATION_SCHEMA.TABLES for databases provided
-# ## in the list above
-# # gather_table_schema = false
-#
-# ## gather thread state counts from INFORMATION_SCHEMA.PROCESSLIST
-# # gather_process_list = false
-#
-# ## gather user statistics from INFORMATION_SCHEMA.USER_STATISTICS
-# # gather_user_statistics = false
-#
-# ## gather auto_increment columns and max values from information schema
-# # gather_info_schema_auto_inc = false
-#
-# ## gather metrics from INFORMATION_SCHEMA.INNODB_METRICS
-# # gather_innodb_metrics = false
-#
-# ## gather metrics from all channels from SHOW SLAVE STATUS command output
-# # gather_all_slave_channels = false
-#
-# ## gather metrics from SHOW SLAVE STATUS command output
-# # gather_slave_status = false
-#
-# ## gather metrics from SHOW REPLICA STATUS command output
-# # gather_replica_status = false
-#
-# ## use SHOW ALL SLAVES STATUS command output for MariaDB
-# ## use SHOW ALL REPLICAS STATUS command if enable gather replica status
-# # mariadb_dialect = false
-#
-# ## gather metrics from SHOW BINARY LOGS command output
-# # gather_binary_logs = false
-#
-# ## gather metrics from SHOW GLOBAL VARIABLES command output
-# # gather_global_variables = true
-#
-# ## gather metrics from PERFORMANCE_SCHEMA.TABLE_IO_WAITS_SUMMARY_BY_TABLE
-# # gather_table_io_waits = false
-#
-# ## gather metrics from PERFORMANCE_SCHEMA.TABLE_LOCK_WAITS
-# # gather_table_lock_waits = false
-#
-# ## gather metrics from PERFORMANCE_SCHEMA.TABLE_IO_WAITS_SUMMARY_BY_INDEX_USAGE
-# # gather_index_io_waits = false
-#
-# ## gather metrics from PERFORMANCE_SCHEMA.EVENT_WAITS
-# # gather_event_waits = false
-#
-# ## gather metrics from PERFORMANCE_SCHEMA.FILE_SUMMARY_BY_EVENT_NAME
-# # gather_file_events_stats = false
-#
-# ## gather metrics from PERFORMANCE_SCHEMA.EVENTS_STATEMENTS_SUMMARY_BY_DIGEST
-# # gather_perf_events_statements = false
-# #
-# ## gather metrics from PERFORMANCE_SCHEMA.EVENTS_STATEMENTS_SUMMARY_BY_ACCOUNT_BY_EVENT_NAME
-# # gather_perf_sum_per_acc_per_event = false
-# #
-# ## list of events to be gathered for gather_perf_sum_per_acc_per_event
-# ## in case of empty list all events will be gathered
-# # perf_summary_events = []
-#
-# ## the limits for metrics form perf_events_statements
-# # perf_events_statements_digest_text_limit = 120
-# # perf_events_statements_limit = 250
-# # perf_events_statements_time_limit = 86400
-#
-# ## Some queries we may want to run less often (such as SHOW GLOBAL VARIABLES)
-# ## example: interval_slow = "30m"
-# # interval_slow = ""
-#
-# ## Optional TLS Config (used if tls=custom parameter specified in server uri)
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Provides metrics about the state of a NATS server
-# # This plugin does NOT support FreeBSD
-# [[inputs.nats]]
-# ## The address of the monitoring endpoint of the NATS server
-# server = "http://localhost:8222"
-#
-# ## Maximum time to receive response
-# # response_timeout = "5s"
-
-
-# # Neptune Apex data collector
-# [[inputs.neptune_apex]]
-# ## The Neptune Apex plugin reads the publicly available status.xml data from a local Apex.
-# ## Measurements will be logged under "apex".
-#
-# ## The base URL of the local Apex(es). If you specify more than one server, they will
-# ## be differentiated by the "source" tag.
-# servers = [
-# "http://apex.local",
-# ]
-#
-# ## The response_timeout specifies how long to wait for a reply from the Apex.
-# #response_timeout = "5s"
-#
-
-
-# # Gather metrics about network interfaces
-# [[inputs.net]]
-# ## By default, telegraf gathers stats from any up interface (excluding loopback)
-# ## Setting interfaces will tell it to gather these explicit interfaces,
-# ## regardless of status. When specifying an interface, glob-style
-# ## patterns are also supported.
-# # interfaces = ["eth*", "enp0s[0-1]", "lo"]
-#
-# ## On linux systems telegraf also collects protocol stats.
-# ## Setting ignore_protocol_stats to true will skip reporting of protocol metrics.
-# ##
-# ## DEPRECATION NOTICE: A value of 'false' is deprecated and discouraged!
-# ## Please set this to `true` and use the 'inputs.nstat'
-# ## plugin instead.
-# # ignore_protocol_stats = false
-
-
-# # Collect response time of a TCP or UDP connection
-# [[inputs.net_response]]
-# ## Protocol, must be "tcp" or "udp"
-# ## NOTE: because the "udp" protocol does not respond to requests, it requires
-# ## a send/expect string pair (see below).
-# protocol = "tcp"
-# ## Server address (default localhost)
-# address = "localhost:80"
-#
-# ## Set timeout
-# # timeout = "1s"
-#
-# ## Set read timeout (only used if expecting a response)
-# # read_timeout = "1s"
-#
-# ## The following options are required for UDP checks. For TCP, they are
-# ## optional. The plugin will send the given string to the server and then
-# ## expect to receive the given 'expect' string back.
-# ## string sent to the server
-# # send = "ssh"
-# ## expected string in answer
-# # expect = "ssh"
-#
-# ## Uncomment to remove deprecated fields; recommended for new deploys
-# # fieldexclude = ["result_type", "string_found"]
-
-
-# # Read TCP metrics such as established, time wait and sockets counts.
-# [[inputs.netstat]]
-# # no configuration
-
-
-# # Read per-mount NFS client metrics from /proc/self/mountstats
-# [[inputs.nfsclient]]
-# ## Read more low-level metrics (optional, defaults to false)
-# # fullstat = false
-#
-# ## List of mounts to explicitly include or exclude (optional)
-# ## The pattern (Go regexp) is matched against the mount point (not the
-# ## device being mounted). If include_mounts is set, all mounts are ignored
-# ## unless present in the list. If a mount is listed in both include_mounts
-# ## and exclude_mounts, it is excluded. Go regexp patterns can be used.
-# # include_mounts = []
-# # exclude_mounts = []
-#
-# ## List of operations to include or exclude from collecting. This applies
-# ## only when fullstat=true. Semantics are similar to {include,exclude}_mounts:
-# ## the default is to collect everything; when include_operations is set, only
-# ## those OPs are collected; when exclude_operations is set, all are collected
-# ## except those listed. If include and exclude are set, the OP is excluded.
-# ## See /proc/self/mountstats for a list of valid operations; note that
-# ## NFSv3 and NFSv4 have different lists. While it is not possible to
-# ## have different include/exclude lists for NFSv3/4, unused elements
-# ## in the list should be okay. It is possible to have different lists
-# ## for different mountpoints: use multiple [[input.nfsclient]] stanzas,
-# ## with their own lists. See "include_mounts" above, and be careful of
-# ## duplicate metrics.
-# # include_operations = []
-# # exclude_operations = []
-
-
-# # Read Nginx's basic status information (ngx_http_stub_status_module)
-# [[inputs.nginx]]
-# ## An array of Nginx stub_status URI to gather stats.
-# urls = ["http://localhost/server_status"]
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## HTTP response timeout (default: 5s)
-# response_timeout = "5s"
-
-
-# # Read Nginx Plus' advanced status information
-# [[inputs.nginx_plus]]
-# ## An array of Nginx status URIs to gather stats.
-# urls = ["http://localhost/status"]
-#
-# # HTTP response timeout (default: 5s)
-# response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read Nginx Plus API advanced status information
-# [[inputs.nginx_plus_api]]
-# ## An array of Nginx API URIs to gather stats.
-# urls = ["http://localhost/api"]
-# # Nginx API version, default: 3
-# # api_version = 3
-#
-# # HTTP response timeout (default: 5s)
-# response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read Nginx virtual host traffic status module information (nginx-module-sts)
-# [[inputs.nginx_sts]]
-# ## An array of ngx_http_status_module or status URI to gather stats.
-# urls = ["http://localhost/status"]
-#
-# ## HTTP response timeout (default: 5s)
-# response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read nginx_upstream_check module status information (https://github.com/yaoweibin/nginx_upstream_check_module)
-# [[inputs.nginx_upstream_check]]
-# ## An URL where Nginx Upstream check module is enabled
-# ## It should be set to return a JSON formatted response
-# url = "http://127.0.0.1/status?format=json"
-#
-# ## HTTP method
-# # method = "GET"
-#
-# ## Optional HTTP headers
-# # headers = {"X-Special-Header" = "Special-Value"}
-#
-# ## Override HTTP "Host" header
-# # host_header = "check.example.com"
-#
-# ## Timeout for HTTP requests
-# timeout = "5s"
-#
-# ## Optional HTTP Basic Auth credentials
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read Nginx virtual host traffic status module information (nginx-module-vts)
-# [[inputs.nginx_vts]]
-# ## An array of ngx_http_status_module or status URI to gather stats.
-# urls = ["http://localhost/status"]
-#
-# ## HTTP response timeout (default: 5s)
-# response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read metrics from the Nomad API
-# [[inputs.nomad]]
-# ## URL for the Nomad agent
-# # url = "http://127.0.0.1:4646"
-#
-# ## Set response_timeout (default 5 seconds)
-# # response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = /path/to/cafile
-# # tls_cert = /path/to/certfile
-# # tls_key = /path/to/keyfile
-
-
-# # A plugin to collect stats from the NSD DNS resolver
-# [[inputs.nsd]]
-# ## Address of server to connect to, optionally ':port'. Defaults to the
-# ## address in the nsd config file.
-# server = "127.0.0.1:8953"
-#
-# ## If running as a restricted user you can prepend sudo for additional access:
-# # use_sudo = false
-#
-# ## The default location of the nsd-control binary can be overridden with:
-# # binary = "/usr/sbin/nsd-control"
-#
-# ## The default location of the nsd config file can be overridden with:
-# # config_file = "/etc/nsd/nsd.conf"
-#
-# ## The default timeout of 1s can be overridden with:
-# # timeout = "1s"
-
-
-# # Read NSQ topic and channel statistics.
-# [[inputs.nsq]]
-# ## An array of NSQD HTTP API endpoints
-# endpoints = ["http://localhost:4151"]
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Collect kernel snmp counters and network interface statistics
-# [[inputs.nstat]]
-# ## file paths for proc files. If empty default paths will be used:
-# ## /proc/net/netstat, /proc/net/snmp, /proc/net/snmp6
-# ## These can also be overridden with env variables, see README.
-# proc_net_netstat = "/proc/net/netstat"
-# proc_net_snmp = "/proc/net/snmp"
-# proc_net_snmp6 = "/proc/net/snmp6"
-# ## dump metrics with 0 values too
-# dump_zeros = true
-
-
-# # Get standard NTP query metrics, requires ntpq executable.
-# [[inputs.ntpq]]
-# ## Servers to query with ntpq.
-# ## If no server is given, the local machine is queried.
-# # servers = []
-#
-# ## Options to pass to the ntpq command.
-# # options = "-p"
-#
-# ## Output format for the 'reach' field.
-# ## Available values are
-# ## octal -- output as is in octal representation e.g. 377 (default)
-# ## decimal -- convert value to decimal representation e.g. 371 -> 249
-# ## count -- count the number of bits in the value. This represents
-# ## the number of successful reaches, e.g. 37 -> 5
-# ## ratio -- output the ratio of successful attempts e.g. 37 -> 5/8 = 0.625
-# # reach_format = "octal"
-
-
-# # Retrieve data from OPCUA devices
-# [[inputs.opcua]]
-# ## Metric name
-# # name = "opcua"
-#
-# ## OPC UA Endpoint URL
-# # endpoint = "opc.tcp://localhost:4840"
-#
-# ## Maximum time allowed to establish a connect to the endpoint.
-# # connect_timeout = "10s"
-#
-# ## Maximum time allowed for a request over the established connection.
-# # request_timeout = "5s"
-#
-# ## Maximum time that a session shall remain open without activity.
-# # session_timeout = "20m"
-#
-# ## Retry options for failing reads e.g. due to invalid sessions
-# ## If the retry count is zero, the read will fail after the initial attempt.
-# # read_retry_timeout = "100ms"
-# # read_retry_count = 0
-#
-# ## Number of consecutive errors before forcing a reconnection
-# ## If set to 1 (default), the client will reconnect after a single failed read
-# # reconnect_error_threshold = 1
-#
-# ## Security policy, one of "None", "Basic128Rsa15", "Basic256",
-# ## "Basic256Sha256", or "auto"
-# # security_policy = "auto"
-#
-# ## Security mode, one of "None", "Sign", "SignAndEncrypt", or "auto"
-# # security_mode = "auto"
-#
-# ## Path to cert.pem. Required when security mode or policy isn't "None".
-# ## If cert path is not supplied, self-signed cert and key will be generated.
-# # certificate = "/etc/telegraf/cert.pem"
-#
-# ## Path to private key.pem. Required when security mode or policy isn't "None".
-# ## If key path is not supplied, self-signed cert and key will be generated.
-# # private_key = "/etc/telegraf/key.pem"
-#
-# ## Authentication Method, one of "Certificate", "UserName", or "Anonymous". To
-# ## authenticate using a specific ID, select 'Certificate' or 'UserName'
-# # auth_method = "Anonymous"
-#
-# ## Username and password required for auth_method = "UserName"
-# # username = ""
-# # password = ""
-#
-# ## Option to select the metric timestamp to use. Valid options are:
-# ## "gather" -- uses the time of receiving the data in telegraf
-# ## "server" -- uses the timestamp provided by the server
-# ## "source" -- uses the timestamp provided by the source
-# # timestamp = "gather"
-#
-# ## Client trace messages
-# ## When set to true, and debug mode enabled in the agent settings, the OPCUA
-# ## client's messages are included in telegraf logs. These messages are very
-# ## noisey, but essential for debugging issues.
-# # client_trace = false
-#
-# ## Include additional Fields in each metric
-# ## Available options are:
-# ## DataType -- OPC-UA Data Type (string)
-# # optional_fields = []
-#
-# ## Node ID configuration
-# ## name - field name to use in the output
-# ## namespace - OPC UA namespace of the node (integer value 0 thru 3)
-# ## identifier_type - OPC UA ID type (s=string, i=numeric, g=guid, b=opaque)
-# ## identifier - OPC UA ID (tag as shown in opcua browser)
-# ## default_tags - extra tags to be added to the output metric (optional)
-# ##
-# ## Use either the inline notation or the bracketed notation, not both.
-#
-# ## Inline notation (default_tags not supported yet)
-# # nodes = [
-# # {name="", namespace="", identifier_type="", identifier=""},
-# # ]
-#
-# ## Bracketed notation
-# # [[inputs.opcua.nodes]]
-# # name = "node1"
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-# # default_tags = { tag1 = "value1", tag2 = "value2" }
-# #
-# # [[inputs.opcua.nodes]]
-# # name = "node2"
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-#
-# ## Node Group
-# ## Sets defaults so they aren't required in every node.
-# ## Default values can be set for:
-# ## * Metric name
-# ## * OPC UA namespace
-# ## * Identifier
-# ## * Default tags
-# ##
-# ## Multiple node groups are allowed
-# #[[inputs.opcua.group]]
-# ## Group Metric name. Overrides the top level name. If unset, the
-# ## top level name is used.
-# # name =
-#
-# ## Group default namespace. If a node in the group doesn't set its
-# ## namespace, this is used.
-# # namespace =
-#
-# ## Group default identifier type. If a node in the group doesn't set its
-# ## namespace, this is used.
-# # identifier_type =
-#
-# ## Default tags that are applied to every node in this group. Can be
-# ## overwritten in a node by setting a different value for the tag name.
-# ## example: default_tags = { tag1 = "value1" }
-# # default_tags = {}
-#
-# ## Node ID Configuration. Array of nodes with the same settings as above.
-# ## Use either the inline notation or the bracketed notation, not both.
-#
-# ## Inline notation (default_tags not supported yet)
-# # nodes = [
-# # {name="node1", namespace="", identifier_type="", identifier=""},
-# # {name="node2", namespace="", identifier_type="", identifier=""},
-# #]
-#
-# ## Bracketed notation
-# # [[inputs.opcua.group.nodes]]
-# # name = "node1"
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-# # default_tags = { tag1 = "override1", tag2 = "value2" }
-# #
-# # [[inputs.opcua.group.nodes]]
-# # name = "node2"
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-#
-# ## Enable workarounds required by some devices to work correctly
-# # [inputs.opcua.workarounds]
-# # ## Set additional valid status codes, StatusOK (0x0) is always considered valid
-# # # additional_valid_status_codes = ["0xC0"]
-#
-# # [inputs.opcua.request_workarounds]
-# # ## Use unregistered reads instead of registered reads
-# # # use_unregistered_reads = false
-
-
-# # OpenLDAP cn=Monitor plugin
-# [[inputs.openldap]]
-# host = "localhost"
-# port = 389
-#
-# # ldaps, starttls, or no encryption. default is an empty string, disabling all encryption.
-# # note that port will likely need to be changed to 636 for ldaps
-# # valid options: "" | "starttls" | "ldaps"
-# tls = ""
-#
-# # skip peer certificate verification. Default is false.
-# insecure_skip_verify = false
-#
-# # Path to PEM-encoded Root certificate to use to verify server certificate
-# tls_ca = "/etc/ssl/certs.pem"
-#
-# # dn/password to bind with. If bind_dn is empty, an anonymous bind is performed.
-# bind_dn = ""
-# bind_password = ""
-#
-# # reverse metric names so they sort more naturally
-# # Defaults to false if unset, but is set to true when generating a new config
-# reverse_metric_names = true
-
-
-# # Get standard NTP query metrics from OpenNTPD.
-# [[inputs.openntpd]]
-# ## Run ntpctl binary with sudo.
-# # use_sudo = false
-#
-# ## Location of the ntpctl binary.
-# # binary = "/usr/sbin/ntpctl"
-#
-# ## Maximum time the ntpctl binary is allowed to run.
-# # timeout = "5s"
-
-
-# # Derive metrics from aggregating OpenSearch query results
-# [[inputs.opensearch_query]]
-# ## OpenSearch cluster endpoint(s). Multiple urls can be specified as part
-# ## of the same cluster. Only one successful call will be made per interval.
-# urls = [ "https://node1.os.example.com:9200" ] # required.
-#
-# ## OpenSearch client timeout, defaults to "5s".
-# # timeout = "5s"
-#
-# ## HTTP basic authentication details
-# # username = "admin"
-# # password = "admin"
-#
-# ## Skip TLS validation. Useful for local testing and self-signed certs.
-# # insecure_skip_verify = false
-#
-# [[inputs.opensearch_query.aggregation]]
-# ## measurement name for the results of the aggregation query
-# measurement_name = "measurement"
-#
-# ## OpenSearch index or index pattern to search
-# index = "index-*"
-#
-# ## The date/time field in the OpenSearch index (mandatory).
-# date_field = "@timestamp"
-#
-# ## If the field used for the date/time field in OpenSearch is also using
-# ## a custom date/time format it may be required to provide the format to
-# ## correctly parse the field.
-# ##
-# ## If using one of the built in OpenSearch formats this is not required.
-# ## https://opensearch.org/docs/2.4/opensearch/supported-field-types/date/#built-in-formats
-# # date_field_custom_format = ""
-#
-# ## Time window to query (eg. "1m" to query documents from last minute).
-# ## Normally should be set to same as collection interval
-# query_period = "1m"
-#
-# ## Lucene query to filter results
-# # filter_query = "*"
-#
-# ## Fields to aggregate values (must be numeric fields)
-# # metric_fields = ["metric"]
-#
-# ## Aggregation function to use on the metric fields
-# ## Must be set if 'metric_fields' is set
-# ## Valid values are: avg, sum, min, max, sum
-# # metric_function = "avg"
-#
-# ## Fields to be used as tags. Must be text, non-analyzed fields. Metric
-# ## aggregations are performed per tag
-# # tags = ["field.keyword", "field2.keyword"]
-#
-# ## Set to true to not ignore documents when the tag(s) above are missing
-# # include_missing_tag = false
-#
-# ## String value of the tag when the tag does not exist
-# ## Required when include_missing_tag is true
-# # missing_tag_value = "null"
-
-
-# # A plugin to collect stats from Opensmtpd - a validating, recursive, and caching DNS resolver
-# [[inputs.opensmtpd]]
-# ## If running as a restricted user you can prepend sudo for additional access:
-# #use_sudo = false
-#
-# ## The default location of the smtpctl binary can be overridden with:
-# binary = "/usr/sbin/smtpctl"
-#
-# # The default timeout of 1s can be overridden with:
-# #timeout = "1s"
-
-
-# # Read current weather and forecasts data from openweathermap.org
-# [[inputs.openweathermap]]
-# ## OpenWeatherMap API key.
-# app_id = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
-#
-# ## City ID's to collect weather data from.
-# city_id = ["5391959"]
-#
-# ## Language of the description field. Can be one of "ar", "bg",
-# ## "ca", "cz", "de", "el", "en", "fa", "fi", "fr", "gl", "hr", "hu",
-# ## "it", "ja", "kr", "la", "lt", "mk", "nl", "pl", "pt", "ro", "ru",
-# ## "se", "sk", "sl", "es", "tr", "ua", "vi", "zh_cn", "zh_tw"
-# # lang = "en"
-#
-# ## APIs to fetch; can contain "weather" or "forecast".
-# # fetch = ["weather", "forecast"]
-#
-# ## OpenWeatherMap base URL
-# # base_url = "https://api.openweathermap.org/"
-#
-# ## Timeout for HTTP response.
-# # response_timeout = "5s"
-#
-# ## Preferred unit system for temperature and wind speed. Can be one of
-# ## "metric", "imperial", or "standard".
-# ## The default is "metric" if not specified.
-# # units = "metric"
-#
-# ## Style to query the current weather; available options
-# ## batch -- query multiple cities at once using the "group" endpoint
-# ## individual -- query each city individually using the "weather" endpoint
-# ## You should use "individual" here as it is documented and provides more
-# ## frequent updates. The default is "batch" for backward compatibility.
-# # query_style = "batch"
-#
-# ## Query interval to fetch data.
-# ## By default the global 'interval' setting is used. You should override the
-# ## interval here if the global setting is shorter than 10 minutes as
-# ## OpenWeatherMap weather data is only updated every 10 minutes.
-# # interval = "10m"
-
-
-# # P4Runtime telemetry input plugin
-# [[inputs.p4runtime]]
-# ## Define the endpoint of P4Runtime gRPC server to collect metrics.
-# # endpoint = "127.0.0.1:9559"
-# ## Set DeviceID required for Client Arbitration.
-# ## https://p4.org/p4-spec/p4runtime/main/P4Runtime-Spec.html#sec-client-arbitration-and-controller-replication
-# # device_id = 1
-# ## Filter counters by their names that should be observed.
-# ## Example: counter_names_include=["ingressCounter", "egressCounter"]
-# # counter_names_include = []
-#
-# ## Optional TLS Config.
-# ## Enable client-side TLS and define CA to authenticate the device.
-# # enable_tls = false
-# # tls_ca = "/etc/telegraf/ca.crt"
-# ## Set minimal TLS version to accept by the client.
-# # tls_min_version = "TLS12"
-# ## Use TLS but skip chain & host verification.
-# # insecure_skip_verify = true
-#
-# ## Define client-side TLS certificate & key to authenticate to the device.
-# # tls_cert = "/etc/telegraf/client.crt"
-# # tls_key = "/etc/telegraf/client.key"
-
-
-# # Read metrics of passenger using passenger-status
-# [[inputs.passenger]]
-# ## Path of passenger-status.
-# ##
-# ## Plugin gather metric via parsing XML output of passenger-status
-# ## More information about the tool:
-# ## https://www.phusionpassenger.com/library/admin/apache/overall_status_report.html
-# ##
-# ## If no path is specified, then the plugin simply execute passenger-status
-# ## hopefully it can be found in your PATH
-# command = "passenger-status -v --show=xml"
-
-
-# # Gather counters from PF
-# [[inputs.pf]]
-# ## PF require root access on most systems.
-# ## Setting 'use_sudo' to true will make use of sudo to run pfctl.
-# ## Users must configure sudo to allow telegraf user to run pfctl with no password.
-# ## pfctl can be restricted to only list command "pfctl -s info".
-# use_sudo = false
-
-
-# # Read metrics of phpfpm, via HTTP status page or socket
-# [[inputs.phpfpm]]
-# ## An array of addresses to gather stats about. Specify an ip or hostname
-# ## with optional port and path
-# ##
-# ## Plugin can be configured in three modes (either can be used):
-# ## - http: the URL must start with http:// or https://, ie:
-# ## "http://localhost/status"
-# ## "http://192.168.130.1/status?full"
-# ##
-# ## - unixsocket: path to fpm socket, ie:
-# ## "/var/run/php5-fpm.sock"
-# ## or using a custom fpm status path:
-# ## "/var/run/php5-fpm.sock:fpm-custom-status-path"
-# ## glob patterns are also supported:
-# ## "/var/run/php*.sock"
-# ##
-# ## - fcgi: the URL must start with fcgi:// or cgi://, and port must be present, ie:
-# ## "fcgi://10.0.0.12:9000/status"
-# ## "cgi://10.0.10.12:9001/status"
-# ##
-# ## Example of multiple gathering from local socket and remote host
-# ## urls = ["http://192.168.1.20/status", "/tmp/fpm.sock"]
-# urls = ["http://localhost/status"]
-#
-# ## Format of stats to parse, set to "status" or "json"
-# ## If the user configures the URL to return JSON (e.g.
-# ## http://localhost/status?json), set to JSON. Otherwise, will attempt to
-# ## parse line-by-line. The JSON mode will produce additional metrics.
-# # format = "status"
-#
-# ## Duration allowed to complete HTTP requests.
-# # timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Ping given url(s) and return statistics
-# [[inputs.ping]]
-# ## Hosts to send ping packets to.
-# urls = ["example.org"]
-#
-# ## Method used for sending pings, can be either "exec" or "native". When set
-# ## to "exec" the systems ping command will be executed. When set to "native"
-# ## the plugin will send pings directly.
-# ##
-# ## While the default is "exec" for backwards compatibility, new deployments
-# ## are encouraged to use the "native" method for improved compatibility and
-# ## performance.
-# # method = "exec"
-#
-# ## Number of ping packets to send per interval. Corresponds to the "-c"
-# ## option of the ping command.
-# # count = 1
-#
-# ## Time to wait between sending ping packets in seconds. Operates like the
-# ## "-i" option of the ping command.
-# # ping_interval = 1.0
-#
-# ## If set, the time to wait for a ping response in seconds. Operates like
-# ## the "-W" option of the ping command.
-# # timeout = 1.0
-#
-# ## If set, the total ping deadline, in seconds. Operates like the -w option
-# ## of the ping command.
-# # deadline = 10
-#
-# ## Interface or source address to send ping from. Operates like the -I or -S
-# ## option of the ping command.
-# # interface = ""
-#
-# ## Percentiles to calculate. This only works with the native method.
-# # percentiles = [50, 95, 99]
-#
-# ## Specify the ping executable binary.
-# # binary = "ping"
-#
-# ## Arguments for ping command. When arguments is not empty, the command from
-# ## the binary option will be used and other options (ping_interval, timeout,
-# ## etc) will be ignored.
-# # arguments = ["-c", "3"]
-#
-# ## Use only IPv4 addresses when resolving a hostname. By default, both IPv4
-# ## and IPv6 can be used.
-# # ipv4 = false
-#
-# ## Use only IPv6 addresses when resolving a hostname. By default, both IPv4
-# ## and IPv6 can be used.
-# # ipv6 = false
-#
-# ## Number of data bytes to be sent. Corresponds to the "-s"
-# ## option of the ping command. This only works with the native method.
-# # size = 56
-
-
-# # Measure postfix queue statistics
-# # This plugin ONLY supports non-Windows
-# [[inputs.postfix]]
-# ## Postfix queue directory. If not provided, telegraf will try to use
-# ## 'postconf -h queue_directory' to determine it.
-# # queue_directory = "/var/spool/postfix"
-
-
-# # Read metrics from one or many PowerDNS servers
-# [[inputs.powerdns]]
-# # An array of sockets to gather stats about.
-# # Specify a path to unix socket.
-# #
-# # If no servers are specified, then '/var/run/pdns.controlsocket' is used as the path.
-# unix_sockets = ["/var/run/pdns.controlsocket"]
-
-
-# # Read metrics from one or many PowerDNS Recursor servers
-# [[inputs.powerdns_recursor]]
-# ## Path to the Recursor control socket.
-# unix_sockets = ["/var/run/pdns_recursor.controlsocket"]
-#
-# ## Directory to create receive socket. This default is likely not writable,
-# ## please reference the full plugin documentation for a recommended setup.
-# # socket_dir = "/var/run/"
-# ## Socket permissions for the receive socket.
-# # socket_mode = "0666"
-#
-# ## The version of the PowerDNS control protocol to use. You will have to
-# ## change this based on your PowerDNS Recursor version, see below:
-# ## Version 1: PowerDNS <4.5.0
-# ## Version 2: PowerDNS 4.5.0 - 4.5.11
-# ## Version 3: PowerDNS >=4.6.0
-# ## By default this is set to 1.
-# # control_protocol_version = 1
-#
-
-
-# # Monitor process cpu and memory usage
-# [[inputs.procstat]]
-# ## PID file to monitor process
-# pid_file = "/var/run/nginx.pid"
-# ## executable name (ie, pgrep <exe>)
-# # exe = "nginx"
-# ## pattern as argument for pgrep (ie, pgrep -f <pattern>)
-# # pattern = "nginx"
-# ## user as argument for pgrep (ie, pgrep -u <user>)
-# # user = "nginx"
-# ## Systemd unit name, supports globs when include_systemd_children is set to true
-# # systemd_unit = "nginx.service"
-# # include_systemd_children = false
-# ## CGroup name or path, supports globs
-# # cgroup = "systemd/system.slice/nginx.service"
-# ## Supervisor service names of hypervisorctl management
-# # supervisor_units = ["webserver", "proxy"]
-#
-# ## Windows service name
-# # win_service = ""
-#
-# ## override for process_name
-# ## This is optional; default is sourced from /proc/<pid>/status
-# # process_name = "bar"
-#
-# ## Field name prefix
-# # prefix = ""
-#
-# ## Mode to use when calculating CPU usage. Can be one of 'solaris' or 'irix'.
-# # mode = "irix"
-#
-# ## Add the given information tag instead of a field
-# ## This allows to create unique metrics/series when collecting processes with
-# ## otherwise identical tags. However, please be careful as this can easily
-# ## result in a large number of series, especially with short-lived processes,
-# ## creating high cardinality at the output.
-# ## Available options are:
-# ## cmdline -- full commandline
-# ## pid -- ID of the process
-# ## ppid -- ID of the process' parent
-# ## status -- state of the process
-# ## user -- username owning the process
-# ## socket only options:
-# ## protocol -- protocol type of the process socket
-# ## state -- state of the process socket
-# ## src -- source address of the process socket (non-unix sockets)
-# ## src_port -- source port of the process socket (non-unix sockets)
-# ## dest -- destination address of the process socket (non-unix sockets)
-# ## dest_port -- destination port of the process socket (non-unix sockets)
-# ## name -- name of the process socket (unix sockets only)
-# ## Available for procstat_lookup:
-# ## level -- level of the process filtering
-# # tag_with = []
-#
-# ## Properties to collect
-# ## Available options are
-# ## cpu -- CPU usage statistics
-# ## limits -- set resource limits
-# ## memory -- memory usage statistics
-# ## mmap -- mapped memory usage statistics (caution: can cause high load)
-# ## sockets -- socket statistics for protocols in 'socket_protocols'
-# # properties = ["cpu", "limits", "memory", "mmap"]
-#
-# ## Protocol filter for the sockets property
-# ## Available options are
-# ## all -- all of the protocols below
-# ## tcp4 -- TCP socket statistics for IPv4
-# ## tcp6 -- TCP socket statistics for IPv6
-# ## udp4 -- UDP socket statistics for IPv4
-# ## udp6 -- UDP socket statistics for IPv6
-# ## unix -- Unix socket statistics
-# # socket_protocols = ["all"]
-#
-# ## Method to use when finding process IDs. Can be one of 'pgrep', or
-# ## 'native'. The pgrep finder calls the pgrep executable in the PATH while
-# ## the native finder performs the search directly in a manor dependent on the
-# ## platform. Default is 'pgrep'
-# # pid_finder = "pgrep"
-#
-# ## New-style filtering configuration (multiple filter sections are allowed)
-# # [[inputs.procstat.filter]]
-# # ## Name of the filter added as 'filter' tag
-# # name = "shell"
-# #
-# # ## Service filters, only one is allowed
-# # ## Systemd unit names (wildcards are supported)
-# # # systemd_units = []
-# # ## CGroup name or path (wildcards are supported)
-# # # cgroups = []
-# # ## Supervisor service names of hypervisorctl management
-# # # supervisor_units = []
-# # ## Windows service names
-# # # win_service = []
-# #
-# # ## Process filters, multiple are allowed
-# # ## Regular expressions to use for matching against the full command
-# # # patterns = ['.*']
-# # ## List of users owning the process (wildcards are supported)
-# # # users = ['*']
-# # ## List of executable paths of the process (wildcards are supported)
-# # # executables = ['*']
-# # ## List of process names (wildcards are supported)
-# # # process_names = ['*']
-# # ## Recursion depth for determining children of the matched processes
-# # ## A negative value means all children with infinite depth
-# # # recursion_depth = 0
-
-
-# # Provides metrics from Proxmox nodes (Proxmox Virtual Environment > 6.2).
-# [[inputs.proxmox]]
-# ## API connection configuration. The API token was introduced in Proxmox v6.2.
-# ## Required permissions for user and token: PVEAuditor role on /.
-# base_url = "https://localhost:8006/api2/json"
-# api_token = "USER@REALM!TOKENID=UUID"
-#
-# ## Node name, defaults to OS hostname
-# ## Unless Telegraf is on the same host as Proxmox, setting this is required.
-# # node_name = ""
-#
-# ## Additional tags of the VM stats data to add as a tag
-# ## Supported values are "vmid" and "status"
-# # additional_vmstats_tags = []
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## HTTP response timeout (default: 5s)
-# # response_timeout = "5s"
-
-
-# # Reads last_run_summary.yaml file and converts to measurements
-# [[inputs.puppetagent]]
-# ## Location of puppet last run summary file
-# location = "/var/lib/puppet/state/last_run_summary.yaml"
-
-
-# # Reads metrics from RabbitMQ servers via the Management Plugin
-# [[inputs.rabbitmq]]
-# ## Management Plugin url. (default: http://localhost:15672)
-# # url = "http://localhost:15672"
-#
-# ## Credentials
-# # username = "guest"
-# # password = "guest"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Optional request timeouts
-# ##
-# ## ResponseHeaderTimeout, if non-zero, specifies the amount of time to wait
-# ## for a server's response headers after fully writing the request.
-# # header_timeout = "3s"
-# ##
-# ## client_timeout specifies a time limit for requests made by this client.
-# ## Includes connection time, any redirects, and reading the response body.
-# # client_timeout = "4s"
-#
-# ## A list of nodes to gather as the rabbitmq_node measurement. If not
-# ## specified, metrics for all nodes are gathered.
-# # nodes = ["rabbit@node1", "rabbit@node2"]
-#
-# ## A list of exchanges to gather as the rabbitmq_exchange measurement. If not
-# ## specified, metrics for all exchanges are gathered.
-# # exchanges = ["telegraf"]
-#
-# ## Metrics to include and exclude. Globs accepted.
-# ## Note that an empty array for both will include all metrics
-# ## Currently the following metrics are supported: "exchange", "federation", "node", "overview", "queue"
-# # metric_include = []
-# # metric_exclude = []
-#
-# ## Queues to include and exclude. Globs accepted.
-# ## Note that an empty array for both will include all queues
-# # queue_name_include = []
-# # queue_name_exclude = []
-#
-# ## Federation upstreams to include and exclude specified as an array of glob
-# ## pattern strings. Federation links can also be limited by the queue and
-# ## exchange filters.
-# # federation_upstream_include = []
-# # federation_upstream_exclude = []
-
-
-# [[inputs.radius]]
-# ## An array of Server IPs and ports to gather from. If none specified, defaults to localhost.
-# servers = ["127.0.0.1:1812","hostname.domain.com:1812"]
-#
-# ## Credentials for radius authentication.
-# username = "myuser"
-# password = "mypassword"
-# secret = "mysecret"
-#
-# ## Request source server IP, normally the server running telegraf.
-# ## This corresponds to Radius' NAS-IP-Address.
-# # request_ip = "127.0.0.1"
-#
-# ## Maximum time to receive response.
-# # response_timeout = "5s"
-
-
-# # Read raindrops stats (raindrops - real-time stats for preforking Rack servers)
-# [[inputs.raindrops]]
-# ## An array of raindrops middleware URI to gather stats.
-# urls = ["http://localhost:8080/_raindrops"]
-
-
-# # Reads metrics from RavenDB servers via the Monitoring Endpoints
-# [[inputs.ravendb]]
-# ## Node URL and port that RavenDB is listening on. By default,
-# ## attempts to connect securely over HTTPS, however, if the user
-# ## is running a local unsecure development cluster users can use
-# ## HTTP via a URL like "http://localhost:8080"
-# url = "https://localhost:4433"
-#
-# ## RavenDB X509 client certificate setup
-# # tls_cert = "/etc/telegraf/raven.crt"
-# # tls_key = "/etc/telegraf/raven.key"
-#
-# ## Optional request timeout
-# ##
-# ## Timeout, specifies the amount of time to wait
-# ## for a server's response headers after fully writing the request and
-# ## time limit for requests made by this client
-# # timeout = "5s"
-#
-# ## List of statistics which are collected
-# # At least one is required
-# # Allowed values: server, databases, indexes, collections
-# #
-# # stats_include = ["server", "databases", "indexes", "collections"]
-#
-# ## List of db where database stats are collected
-# ## If empty, all db are concerned
-# # db_stats_dbs = []
-#
-# ## List of db where index status are collected
-# ## If empty, all indexes from all db are concerned
-# # index_stats_dbs = []
-#
-# ## List of db where collection status are collected
-# ## If empty, all collections from all db are concerned
-# # collection_stats_dbs = []
-
-
-# # Read CPU, Fans, Powersupply and Voltage metrics of hardware server through redfish APIs
-# [[inputs.redfish]]
-# ## Redfish API Base URL.
-# address = "https://127.0.0.1:5000"
-#
-# ## Credentials for the Redfish API. Can also use secrets.
-# username = "root"
-# password = "password123456"
-#
-# ## System Id to collect data for in Redfish APIs.
-# computer_system_id="System.Embedded.1"
-#
-# ## Metrics to collect
-# ## The metric collects to gather. Choose from "power" and "thermal".
-# # include_metrics = ["power", "thermal"]
-#
-# ## Tag sets allow you to include redfish OData link parent data
-# ## For Example.
-# ## Thermal data is an OData link with parent Chassis which has a link of Location.
-# ## For more info see the Redfish Resource and Schema Guide at DMTFs website.
-# ## Available sets are: "chassis.location" and "chassis"
-# # include_tag_sets = ["chassis.location"]
-#
-# ## Workarounds
-# ## Defines workarounds for certain hardware vendors. Choose from:
-# ## * ilo4-thermal - Do not pass 0Data-Version header to Thermal endpoint
-# # workarounds = []
-#
-# ## Amount of time allowed to complete the HTTP request
-# # timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read metrics from one or many redis-sentinel servers
-# [[inputs.redis_sentinel]]
-# ## specify servers via a url matching:
-# ## [protocol://][username:password]@address[:port]
-# ## e.g.
-# ## tcp://localhost:26379
-# ## unix:///var/run/redis-sentinel.sock
-# ##
-# ## If no servers are specified, then localhost is used as the host.
-# ## If no port is specified, 26379 is used
-# # servers = ["tcp://localhost:26379"]
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = true
-
-
-# # Read metrics from one or many RethinkDB servers
-# [[inputs.rethinkdb]]
-# ## An array of URI to gather stats about. Specify an ip or hostname
-# ## with optional port add password. ie,
-# ## rethinkdb://10.10.3.33:18832,
-# ## For rethinkdb v2.3.0+ with username/password authorization you should use
-# servers = ["127.0.0.1:28015"]
-
-
-# # Read metrics one or many Riak servers
-# [[inputs.riak]]
-# # Specify a list of one or more riak http servers
-# servers = ["http://localhost:8098"]
-
-
-# # Read API usage and limits for a Salesforce organisation
-# [[inputs.salesforce]]
-# ## specify your credentials
-# ##
-# username = "your_username"
-# password = "your_password"
-# ##
-# ## (optional) security token
-# # security_token = "your_security_token"
-# ##
-# ## (optional) environment type (sandbox or production)
-# ## default is: production
-# ##
-# # environment = "production"
-# ##
-# ## (optional) API version (default: "39.0")
-# ##
-# # version = "39.0"
-
-
-# # Monitor sensors, requires lm-sensors package
-# # This plugin ONLY supports Linux
-# [[inputs.sensors]]
-# ## Remove numbers from field names.
-# ## If true, a field name like 'temp1_input' will be changed to 'temp_input'.
-# # remove_numbers = true
-#
-# ## Timeout is the maximum amount of time that the sensors command can run.
-# # timeout = "5s"
-
-
-# # Get slab statistics from procfs
-# # This plugin ONLY supports Linux
-# [[inputs.slab]]
-# # no configuration - please see the plugin's README for steps to configure
-# # sudo properly
-
-
-# # Gather SLURM metrics
-# [[inputs.slurm]]
-# ## Slurmrestd URL. Both http and https can be used as schemas.
-# url = "http://127.0.0.1:6820"
-#
-# ## Credentials for JWT-based authentication.
-# # username = "foo"
-# # token = "topSecret"
-#
-# ## Enabled endpoints
-# ## List of endpoints a user can acquire data from.
-# ## Available values are: diag, jobs, nodes, partitions, reservations.
-# # enabled_endpoints = ["diag", "jobs", "nodes", "partitions", "reservations"]
-#
-# ## Maximum time to receive a response. If set to 0s, the
-# ## request will not time out.
-# # response_timeout = "5s"
-#
-# ## Optional TLS Config. Note these options will only
-# ## be taken into account when the scheme specififed on
-# ## the URL parameter is https. They will be silently
-# ## ignored otherwise.
-# ## Set to true/false to enforce TLS being enabled/disabled. If not set,
-# ## enable TLS only if any of the other options are specified.
-# # tls_enable =
-# ## Trusted root certificates for server
-# # tls_ca = "/path/to/cafile"
-# ## Used for TLS client certificate authentication
-# # tls_cert = "/path/to/certfile"
-# ## Used for TLS client certificate authentication
-# # tls_key = "/path/to/keyfile"
-# ## Password for the key file if it is encrypted
-# # tls_key_pwd = ""
-# ## Send the specified TLS server name via SNI
-# # tls_server_name = "kubernetes.example.com"
-# ## Minimal TLS version to accept by the client
-# # tls_min_version = "TLS12"
-# ## List of ciphers to accept, by default all secure ciphers will be accepted
-# ## See https://pkg.go.dev/crypto/tls#pkg-constants for supported values.
-# ## Use "all", "secure" and "insecure" to add all support ciphers, secure
-# ## suites or insecure suites respectively.
-# # tls_cipher_suites = ["secure"]
-# ## Renegotiation method, "never", "once" or "freely"
-# # tls_renegotiation_method = "never"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read metrics from storage devices supporting S.M.A.R.T.
-# [[inputs.smart]]
-# ## Optionally specify the path to the smartctl executable
-# # path_smartctl = "/usr/bin/smartctl"
-#
-# ## Optionally specify the path to the nvme-cli executable
-# # path_nvme = "/usr/bin/nvme"
-#
-# ## Optionally specify if vendor specific attributes should be propagated for NVMe disk case
-# ## ["auto-on"] - automatically find and enable additional vendor specific disk info
-# ## ["vendor1", "vendor2", ...] - e.g. "Intel" enable additional Intel specific disk info
-# # enable_extensions = ["auto-on"]
-#
-# ## On most platforms used cli utilities requires root access.
-# ## Setting 'use_sudo' to true will make use of sudo to run smartctl or nvme-cli.
-# ## Sudo must be configured to allow the telegraf user to run smartctl or nvme-cli
-# ## without a password.
-# # use_sudo = false
-#
-# ## Adds an extra tag "device_type", which can be used to differentiate
-# ## multiple disks behind the same controller (e.g., MegaRAID).
-# # tag_with_device_type = false
-#
-# ## Skip checking disks in this power mode. Defaults to
-# ## "standby" to not wake up disks that have stopped rotating.
-# ## See --nocheck in the man pages for smartctl.
-# ## smartctl version 5.41 and 5.42 have faulty detection of
-# ## power mode and might require changing this value to
-# ## "never" depending on your disks.
-# # nocheck = "standby"
-#
-# ## Gather all returned S.M.A.R.T. attribute metrics and the detailed
-# ## information from each drive into the 'smart_attribute' measurement.
-# # attributes = false
-#
-# ## Optionally specify devices to exclude from reporting if disks auto-discovery is performed.
-# # excludes = [ "/dev/pass6" ]
-#
-# ## Optionally specify devices and device type, if unset
-# ## a scan (smartctl --scan and smartctl --scan -d nvme) for S.M.A.R.T. devices will be done
-# ## and all found will be included except for the excluded in excludes.
-# # devices = [ "/dev/ada0 -d atacam", "/dev/nvme0"]
-#
-# ## Timeout for the cli command to complete.
-# # timeout = "30s"
-#
-# ## Optionally call smartctl and nvme-cli with a specific concurrency policy.
-# ## By default, smartctl and nvme-cli are called in separate threads (goroutines) to gather disk attributes.
-# ## Some devices (e.g. disks in RAID arrays) may have access limitations that require sequential reading of
-# ## SMART data - one individual array drive at the time. In such case please set this configuration option
-# ## to "sequential" to get readings for all drives.
-# ## valid options: concurrent, sequential
-# # read_method = "concurrent"
-
-
-# # Read metrics from SMART storage devices using smartclt's JSON output
-# [[inputs.smartctl]]
-# ## Optionally specify the path to the smartctl executable
-# # path = "/usr/sbin/smartctl"
-#
-# ## Use sudo
-# ## On most platforms used, smartctl requires root access. Setting 'use_sudo'
-# ## to true will make use of sudo to run smartctl. Sudo must be configured to
-# ## allow the telegraf user to run smartctl without a password.
-# # use_sudo = false
-#
-# ## Devices to include or exclude
-# ## By default, the plugin will use all devices found in the output of
-# ## `smartctl --scan-open`. Only one option is allowed at a time. If set, include
-# ## sets the specific devices to scan, while exclude omits specific devices.
-# # devices_include = []
-# # devices_exclude = []
-#
-# ## Skip checking disks in specified power mode
-# ## Defaults to "standby" to not wake up disks that have stopped rotating.
-# ## For full details on the options here, see the --nocheck section in the
-# ## smartctl man page. Choose from:
-# ## * never: always check the device
-# ## * sleep: check the device unless it is in sleep mode
-# ## * standby: check the device unless it is in sleep or standby mode
-# ## * idle: check the device unless it is in sleep, standby, or idle mode
-# # nocheck = "standby"
-#
-# ## Timeout for the cli command to complete
-# # timeout = "30s"
-
-
-# # Retrieves SNMP values from remote agents
-# [[inputs.snmp]]
-# ## Agent addresses to retrieve values from.
-# ## format: agents = ["<scheme://><hostname>:<port>"]
-# ## scheme: optional, either udp, udp4, udp6, tcp, tcp4, tcp6.
-# ## default is udp
-# ## port: optional
-# ## example: agents = ["udp://127.0.0.1:161"]
-# ## agents = ["tcp://127.0.0.1:161"]
-# ## agents = ["udp4://v4only-snmp-agent"]
-# agents = ["udp://127.0.0.1:161"]
-#
-# ## Timeout for each request.
-# # timeout = "5s"
-#
-# ## SNMP version; can be 1, 2, or 3.
-# # version = 2
-#
-# ## Unconnected UDP socket
-# ## When true, SNMP responses are accepted from any address not just
-# ## the requested address. This can be useful when gathering from
-# ## redundant/failover systems.
-# # unconnected_udp_socket = false
-#
-# ## Path to mib files
-# ## Used by the gosmi translator.
-# ## To add paths when translating with netsnmp, use the MIBDIRS environment variable
-# # path = ["/usr/share/snmp/mibs"]
-#
-# ## SNMP community string.
-# # community = "public"
-#
-# ## Agent host tag; should be set to "source" for consistent usage across plugins
-# ## example: agent_host_tag = "source"
-# ## The default value is inconsistent with other plugins. Users will get a
-# ## warning that can be ignored if this is not changed. However, to have a
-# ## consistent experience, set this to "source" in your config to align with
-# ## other plugins.
-# # agent_host_tag = "agent_host"
-#
-# ## Number of retries to attempt.
-# # retries = 3
-#
-# ## The GETBULK max-repetitions parameter.
-# # max_repetitions = 10
-#
-# ## SNMPv3 authentication and encryption options.
-# ##
-# ## Security Name.
-# # sec_name = "myuser"
-# ## Authentication protocol; one of "MD5", "SHA", "SHA224", "SHA256", "SHA384", "SHA512" or "".
-# # auth_protocol = "MD5"
-# ## Authentication password.
-# # auth_password = "pass"
-# ## Security Level; one of "noAuthNoPriv", "authNoPriv", or "authPriv".
-# # sec_level = "authNoPriv"
-# ## Context Name.
-# # context_name = ""
-# ## Privacy protocol used for encrypted messages; one of "DES", "AES", "AES192", "AES192C", "AES256", "AES256C", or "".
-# ### Protocols "AES192", "AES192", "AES256", and "AES256C" require the underlying net-snmp tools
-# ### to be compiled with --enable-blumenthal-aes (http://www.net-snmp.org/docs/INSTALL.html)
-# # priv_protocol = ""
-# ## Privacy password used for encrypted messages.
-# # priv_password = ""
-#
-# ## Add fields and tables defining the variables you wish to collect. This
-# ## example collects the system uptime and interface variables. Reference the
-# ## full plugin documentation for configuration details.
-# [[inputs.snmp.field]]
-# oid = "RFC1213-MIB::sysUpTime.0"
-# name = "sysUptime"
-# conversion = "float(2)"
-#
-# [[inputs.snmp.field]]
-# oid = "RFC1213-MIB::sysName.0"
-# name = "sysName"
-# is_tag = true
-#
-# [[inputs.snmp.table]]
-# oid = "IF-MIB::ifTable"
-# name = "interface"
-# inherit_tags = ["sysName"]
-#
-# [[inputs.snmp.table.field]]
-# oid = "IF-MIB::ifDescr"
-# name = "ifDescr"
-# is_tag = true
-
-
-# # Gather indicators from established connections, using iproute2's ss command.
-# # This plugin ONLY supports non-Windows
-# [[inputs.socketstat]]
-# ## ss can display information about tcp, udp, raw, unix, packet, dccp and sctp sockets
-# ## Specify here the types you want to gather
-# protocols = [ "tcp", "udp" ]
-#
-# ## The default timeout of 1s for ss execution can be overridden here:
-# # timeout = "1s"
-
-
-# # Gather timeseries from Google Cloud Platform v3 monitoring API
-# [[inputs.stackdriver]]
-# ## GCP Project
-# project = "erudite-bloom-151019"
-#
-# ## Include timeseries that start with the given metric type.
-# metric_type_prefix_include = [
-# "compute.googleapis.com/",
-# ]
-#
-# ## Exclude timeseries that start with the given metric type.
-# # metric_type_prefix_exclude = []
-#
-# ## Most metrics are updated no more than once per minute; it is recommended
-# ## to override the agent level interval with a value of 1m or greater.
-# interval = "1m"
-#
-# ## Maximum number of API calls to make per second. The quota for accounts
-# ## varies, it can be viewed on the API dashboard:
-# ## https://cloud.google.com/monitoring/quotas#quotas_and_limits
-# # rate_limit = 14
-#
-# ## The delay and window options control the number of points selected on
-# ## each gather. When set, metrics are gathered between:
-# ## start: now() - delay - window
-# ## end: now() - delay
-# #
-# ## Collection delay; if set too low metrics may not yet be available.
-# # delay = "5m"
-# #
-# ## If unset, the window will start at 1m and be updated dynamically to span
-# ## the time between calls (approximately the length of the plugin interval).
-# # window = "1m"
-#
-# ## TTL for cached list of metric types. This is the maximum amount of time
-# ## it may take to discover new metrics.
-# # cache_ttl = "1h"
-#
-# ## If true, raw bucket counts are collected for distribution value types.
-# ## For a more lightweight collection, you may wish to disable and use
-# ## distribution_aggregation_aligners instead.
-# # gather_raw_distribution_buckets = true
-#
-# ## Aggregate functions to be used for metrics whose value type is
-# ## distribution. These aggregate values are recorded in in addition to raw
-# ## bucket counts; if they are enabled.
-# ##
-# ## For a list of aligner strings see:
-# ## https://cloud.google.com/monitoring/api/ref_v3/rpc/google.monitoring.v3#aligner
-# # distribution_aggregation_aligners = [
-# # "ALIGN_PERCENTILE_99",
-# # "ALIGN_PERCENTILE_95",
-# # "ALIGN_PERCENTILE_50",
-# # ]
-#
-# ## Filters can be added to reduce the number of time series matched. All
-# ## functions are supported: starts_with, ends_with, has_substring, and
-# ## one_of. Only the '=' operator is supported.
-# ##
-# ## The logical operators when combining filters are defined statically using
-# ## the following values:
-# ## filter ::= <resource_labels> {AND <metric_labels> AND <user_labels> AND <system_labels>}
-# ## resource_labels ::= <resource_labels> {OR <resource_label>}
-# ## metric_labels ::= <metric_labels> {OR <metric_label>}
-# ## user_labels ::= <user_labels> {OR <user_label>}
-# ## system_labels ::= <system_labels> {OR <system_label>}
-# ##
-# ## For more details, see https://cloud.google.com/monitoring/api/v3/filters
-# #
-# ## Resource labels refine the time series selection with the following expression:
-# ## resource.labels.<key> = <value>
-# # [[inputs.stackdriver.filter.resource_labels]]
-# # key = "instance_name"
-# # value = 'starts_with("localhost")'
-# #
-# ## Metric labels refine the time series selection with the following expression:
-# ## metric.labels.<key> = <value>
-# # [[inputs.stackdriver.filter.metric_labels]]
-# # key = "device_name"
-# # value = 'one_of("sda", "sdb")'
-# #
-# ## User labels refine the time series selection with the following expression:
-# ## metadata.user_labels."<key>" = <value>
-# # [[inputs.stackdriver.filter.user_labels]]
-# # key = "environment"
-# # value = 'one_of("prod", "staging")'
-# #
-# ## System labels refine the time series selection with the following expression:
-# ## metadata.system_labels."<key>" = <value>
-# # [[inputs.stackdriver.filter.system_labels]]
-# # key = "machine_type"
-# # value = 'starts_with("e2-")'
-
-
-# # Gathers information about processes that running under supervisor using XML-RPC API
-# [[inputs.supervisor]]
-# ## Url of supervisor's XML-RPC endpoint if basic auth enabled in supervisor http server,
-# ## than you have to add credentials to url (ex. http://login:pass@localhost:9001/RPC2)
-# # url="http://localhost:9001/RPC2"
-# ## With settings below you can manage gathering additional information about processes
-# ## If both of them empty, then all additional information will be collected.
-# ## Currently supported supported additional metrics are: pid, rc
-# # metrics_include = []
-
-
-# # Get synproxy counter statistics from procfs
-# # This plugin ONLY supports Linux
-# [[inputs.synproxy]]
-# # no configuration
-
-
-# # Sysstat metrics collector
-# # This plugin ONLY supports Linux
-# [[inputs.sysstat]]
-# ## Path to the sadc command.
-# #
-# ## Common Defaults:
-# ## Debian/Ubuntu: /usr/lib/sysstat/sadc
-# ## Arch: /usr/lib/sa/sadc
-# ## RHEL/CentOS: /usr/lib64/sa/sadc
-# sadc_path = "/usr/lib/sa/sadc" # required
-#
-# ## Path to the sadf command, if it is not in PATH
-# # sadf_path = "/usr/bin/sadf"
-#
-# ## Activities is a list of activities, that are passed as argument to the
-# ## sadc collector utility (e.g: DISK, SNMP etc...)
-# ## The more activities that are added, the more data is collected.
-# # activities = ["DISK"]
-#
-# ## Group metrics to measurements.
-# ##
-# ## If group is false each metric will be prefixed with a description
-# ## and represents itself a measurement.
-# ##
-# ## If Group is true, corresponding metrics are grouped to a single measurement.
-# # group = true
-#
-# ## Options for the sadf command. The values on the left represent the sadf options and
-# ## the values on the right their description (which are used for grouping and prefixing metrics).
-# ##
-# ## Run 'sar -h' or 'man sar' to find out the supported options for your sysstat version.
-# [inputs.sysstat.options]
-# -C = "cpu"
-# -B = "paging"
-# -b = "io"
-# -d = "disk" # requires DISK activity
-# "-n ALL" = "network"
-# "-P ALL" = "per_cpu"
-# -q = "queue"
-# -R = "mem"
-# -r = "mem_util"
-# -S = "swap_util"
-# -u = "cpu_util"
-# -v = "inode"
-# -W = "swap"
-# -w = "task"
-# # -H = "hugepages" # only available for newer linux distributions
-# # "-I ALL" = "interrupts" # requires INT activity
-#
-# ## Device tags can be used to add additional tags for devices. For example the configuration below
-# ## adds a tag vg with value rootvg for all metrics with sda devices.
-# # [[inputs.sysstat.device_tags.sda]]
-# # vg = "rootvg"
-
-
-# # Tacacs plugin collects successful tacacs authentication response times.
-# [[inputs.tacacs]]
-# ## An array of Server IPs (or hostnames) and ports to gather from. If none specified, defaults to localhost.
-# # servers = ["127.0.0.1:49"]
-#
-# ## Request source server IP, normally the server running telegraf.
-# # request_ip = "127.0.0.1"
-#
-# ## Credentials for tacacs authentication.
-# username = "myuser"
-# password = "mypassword"
-# secret = "mysecret"
-#
-# ## Maximum time to receive response.
-# # response_timeout = "5s"
-
-
-# # Reads metrics from a Teamspeak 3 Server via ServerQuery
-# [[inputs.teamspeak]]
-# ## Server address for Teamspeak 3 ServerQuery
-# # server = "127.0.0.1:10011"
-# ## Username for ServerQuery
-# username = "serverqueryuser"
-# ## Password for ServerQuery
-# password = "secret"
-# ## Nickname of the ServerQuery client
-# nickname = "telegraf"
-# ## Array of virtual servers
-# # virtual_servers = [1]
-
-
-# # Read metrics about temperature
-# [[inputs.temp]]
-# ## Desired output format (Linux only)
-# ## Available values are
-# ## v1 -- use pre-v1.22.4 sensor naming, e.g. coretemp_core0_input
-# ## v2 -- use v1.22.4+ sensor naming, e.g. coretemp_core_0_input
-# # metric_format = "v2"
-#
-# ## Add device tag to distinguish devices with the same name (Linux only)
-# # add_device_tag = false
-
-
-# # Read Tengine's basic status information (ngx_http_reqstat_module)
-# [[inputs.tengine]]
-# ## An array of Tengine reqstat module URI to gather stats.
-# urls = ["http://127.0.0.1/us"]
-#
-# ## HTTP response timeout (default: 5s)
-# # response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Gather metrics from the Tomcat server status page.
-# [[inputs.tomcat]]
-# ## URL of the Tomcat server status
-# # url = "http://127.0.0.1:8080/manager/status/all?XML=true"
-#
-# ## HTTP Basic Auth Credentials
-# # username = "tomcat"
-# # password = "s3cret"
-#
-# ## Request timeout
-# # timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Inserts sine and cosine waves for demonstration purposes
-# [[inputs.trig]]
-# ## Set the amplitude
-# amplitude = 10.0
-
-
-# # Read Twemproxy stats data
-# [[inputs.twemproxy]]
-# ## Twemproxy stats address and port (no scheme)
-# addr = "localhost:22222"
-# ## Monitor pool name
-# pools = ["redis_pool", "mc_pool"]
-
-
-# # A plugin to collect stats from the Unbound DNS resolver
-# [[inputs.unbound]]
-# ## Address of server to connect to, read from unbound conf default, optionally ':port'
-# ## Will lookup IP if given a hostname
-# server = "127.0.0.1:8953"
-#
-# ## If running as a restricted user you can prepend sudo for additional access:
-# # use_sudo = false
-#
-# ## The default location of the unbound-control binary can be overridden with:
-# # binary = "/usr/sbin/unbound-control"
-#
-# ## The default location of the unbound config file can be overridden with:
-# # config_file = "/etc/unbound/unbound.conf"
-#
-# ## The default timeout of 1s can be overridden with:
-# # timeout = "1s"
-#
-# ## When set to true, thread metrics are tagged with the thread id.
-# ##
-# ## The default is false for backwards compatibility, and will be changed to
-# ## true in a future version. It is recommended to set to true on new
-# ## deployments.
-# thread_as_tag = false
-#
-# ## Collect metrics with the histogram of the recursive query times:
-# # histogram = false
-
-
-# # Monitor UPSes connected via Network UPS Tools
-# [[inputs.upsd]]
-# ## A running NUT server to connect to.
-# ## IPv6 addresses must be enclosed in brackets (e.g. "[::1]")
-# # server = "127.0.0.1"
-# # port = 3493
-# # username = "user"
-# # password = "password"
-#
-# ## Force parsing numbers as floats
-# ## It is highly recommended to enable this setting to parse numbers
-# ## consistently as floats to avoid database conflicts where some numbers are
-# ## parsed as integers and others as floats.
-# # force_float = false
-#
-# ## Collect additional fields if they are available for the UPS
-# ## The fields need to be specified as NUT variable names, see
-# ## https://networkupstools.org/docs/developer-guide.chunked/apas02.html
-# ## Wildcards are accepted.
-# # additional_fields = []
-#
-# ## Dump information for debugging
-# ## Allows to print the raw variables (and corresponding types) as received
-# ## from the NUT server ONCE for each UPS.
-# ## Please attach this information when reporting issues!
-# # log_level = "trace"
-
-
-# # Read uWSGI metrics.
-# [[inputs.uwsgi]]
-# ## List with urls of uWSGI Stats servers. Url must match pattern:
-# ## scheme://address[:port]
-# ##
-# ## For example:
-# ## servers = ["tcp://localhost:5050", "http://localhost:1717", "unix:///tmp/statsock"]
-# servers = ["tcp://127.0.0.1:1717"]
-#
-# ## General connection timeout
-# # timeout = "5s"
-
-
-# # A plugin to collect stats from Varnish HTTP Cache
-# # This plugin ONLY supports non-Windows
-# [[inputs.varnish]]
-# ## If running as a restricted user you can prepend sudo for additional access:
-# #use_sudo = false
-#
-# ## The default location of the varnishstat binary can be overridden with:
-# binary = "/usr/bin/varnishstat"
-#
-# ## Additional custom arguments for the varnishstat command
-# # binary_args = ["-f", "MAIN.*"]
-#
-# ## The default location of the varnishadm binary can be overridden with:
-# adm_binary = "/usr/bin/varnishadm"
-#
-# ## Custom arguments for the varnishadm command
-# # adm_binary_args = [""]
-#
-# ## Metric version defaults to metric_version=1, use metric_version=2 for removal of nonactive vcls
-# ## Varnish 6.0.2 and newer is required for metric_version=2.
-# metric_version = 1
-#
-# ## Additional regexps to override builtin conversion of varnish metrics into telegraf metrics.
-# ## Regexp group "_vcl" is used for extracting the VCL name. Metrics that contain nonactive VCL's are skipped.
-# ## Regexp group "_field" overrides the field name. Other named regexp groups are used as tags.
-# # regexps = ['^XCNT\.(?P<_vcl>[\w\-]*)(\.)*(?P<group>[\w\-.+]*)\.(?P<_field>[\w\-.+]*)\.val']
-#
-# ## By default, telegraf gather stats for 3 metric points.
-# ## Setting stats will override the defaults shown below.
-# ## Glob matching can be used, ie, stats = ["MAIN.*"]
-# ## stats may also be set to ["*"], which will collect all stats
-# stats = ["MAIN.cache_hit", "MAIN.cache_miss", "MAIN.uptime"]
-#
-# ## Optional name for the varnish instance (or working directory) to query
-# ## Usually append after -n in varnish cli
-# # instance_name = instanceName
-#
-# ## Timeout for varnishstat command
-# # timeout = "1s"
-
-
-# # Reads whois data and expose as metrics
-# [[inputs.whois]]
-# ## List of domains to query
-# domains = ["example.com", "influxdata.com"]
-#
-# ## Use Custom WHOIS server
-# # server = "whois.iana.org"
-#
-# ## Timeout for WHOIS queries
-# # timeout = "30s"
-#
-# ## Enable WHOIS referral chain query
-# # referral_chain_query = false
-
-
-# # Input plugin to collect Windows Event Log messages
-# # This plugin ONLY supports Windows
-# [[inputs.win_eventlog]]
-# ## Telegraf should have Administrator permissions to subscribe for some
-# ## Windows Events channels (e.g. System log)
-#
-# ## LCID (Locale ID) for event rendering
-# ## 1033 to force English language
-# ## 0 to use default Windows locale
-# # locale = 0
-#
-# ## Name of eventlog, used only if xpath_query is empty
-# ## Example: "Application"
-# # eventlog_name = ""
-#
-# ## xpath_query can be in defined short form like "Event/System[EventID=999]"
-# ## or you can form a XML Query. Refer to the Consuming Events article:
-# ## https://docs.microsoft.com/en-us/windows/win32/wes/consuming-events
-# ## XML query is the recommended form, because it is most flexible
-# ## You can create or debug XML Query by creating Custom View in Windows Event Viewer
-# ## and then copying resulting XML here
-# xpath_query = '''
-# <QueryList>
-# <Query Id="0" Path="Security">
-# <Select Path="Security">*</Select>
-# <Suppress Path="Security">*[System[( (EventID >= 5152 and EventID <= 5158) or EventID=5379 or EventID=4672)]]</Suppress>
-# </Query>
-# <Query Id="1" Path="Application">
-# <Select Path="Application">*[System[(Level < 4)]]</Select>
-# </Query>
-# <Query Id="2" Path="Windows PowerShell">
-# <Select Path="Windows PowerShell">*[System[(Level < 4)]]</Select>
-# </Query>
-# <Query Id="3" Path="System">
-# <Select Path="System">*</Select>
-# </Query>
-# <Query Id="4" Path="Setup">
-# <Select Path="Setup">*</Select>
-# </Query>
-# </QueryList>
-# '''
-#
-# ## When true, event logs are read from the beginning; otherwise only future
-# ## events will be logged.
-# # from_beginning = false
-#
-# ## Number of events to fetch in one batch
-# # event_batch_size = 5
-#
-# # Process UserData XML to fields, if this node exists in Event XML
-# # process_userdata = true
-#
-# # Process EventData XML to fields, if this node exists in Event XML
-# # process_eventdata = true
-#
-# ## Separator character to use for unrolled XML Data field names
-# # separator = "_"
-#
-# ## Get only first line of Message field. For most events first line is
-# ## usually more than enough
-# # only_first_line_of_message = true
-#
-# ## Parse timestamp from TimeCreated.SystemTime event field.
-# ## Will default to current time of telegraf processing on parsing error or if
-# ## set to false
-# # timestamp_from_event = true
-#
-# ## System field names:
-# ## "Source", "EventID", "Version", "Level", "Task", "Opcode", "Keywords",
-# ## "TimeCreated", "EventRecordID", "ActivityID", "RelatedActivityID",
-# ## "ProcessID", "ThreadID", "ProcessName", "Channel", "Computer", "UserID",
-# ## "UserName", "Message", "LevelText", "TaskText", "OpcodeText"
-# ##
-# ## In addition to System, Data fields can be unrolled from additional XML
-# ## nodes in event. Human-readable representation of those nodes is formatted
-# ## into event Message field, but XML is more machine-parsable
-#
-# ## Event fields to include as tags
-# ## The values below are included by default.
-# ## Globbing supported (e.g. "Level*" matches both "Level" and "LevelText")
-# # event_tags = ["Source", "EventID", "Level", "LevelText", "Task", "TaskText", "Opcode", "OpcodeText", "Keywords", "Channel", "Computer"]
-#
-# ## Event fields to include
-# ## All fields are sent by default.
-# ## Globbing supported (e.g. "Level*" matches both "Level" and "LevelText")
-# # event_fields = ["*"]
-#
-# ## Event fields to exclude
-# ## Note that if you exclude all fields then no metrics are produced. A valid
-# ## metric includes at least one field.
-# ## Globbing supported (e.g. "Level*" matches both "Level" and "LevelText")
-# # exclude_fields = []
-#
-# ## Event fields to exclude if their value is empty or equals to zero
-# ## The values below are included by default.
-# ## Globbing supported (e.g. "Level*" matches both "Level" and "LevelText")
-# # exclude_empty = ["Task", "Opcode", "*ActivityID", "UserID"]
-#
-# ## Maximum memory size available for an event to render
-# ## Events larger that that are not processed and will not create a metric.
-# ## NOTE: As events are encoded in UTF-16 we need two bytes per character.
-# # event_size_limit = "64KB"
-
-
-# # Input plugin to counterPath Performance Counters on Windows operating systems
-# # This plugin ONLY supports Windows
-# [[inputs.win_perf_counters]]
-# ## By default this plugin returns basic CPU and Disk statistics. See the
-# ## README file for more examples. Uncomment examples below or write your own
-# ## as you see fit. If the system being polled for data does not have the
-# ## Object at startup of the Telegraf agent, it will not be gathered.
-#
-# ## Print All matching performance counters
-# # PrintValid = false
-#
-# ## Whether request a timestamp along with the PerfCounter data or use current
-# ## time
-# # UsePerfCounterTime = true
-#
-# ## If UseWildcardsExpansion params is set to true, wildcards (partial
-# ## wildcards in instance names and wildcards in counters names) in configured
-# ## counter paths will be expanded and in case of localized Windows, counter
-# ## paths will be also localized. It also returns instance indexes in instance
-# ## names. If false, wildcards (not partial) in instance names will still be
-# ## expanded, but instance indexes will not be returned in instance names.
-# # UseWildcardsExpansion = false
-#
-# ## When running on a localized version of Windows and with
-# ## UseWildcardsExpansion = true, Windows will localize object and counter
-# ## names. When LocalizeWildcardsExpansion = false, use the names in
-# ## object.Counters instead of the localized names. Only Instances can have
-# ## wildcards in this case. ObjectName and Counters must not have wildcards
-# ## when this setting is false.
-# # LocalizeWildcardsExpansion = true
-#
-# ## Period after which counters will be reread from configuration and
-# ## wildcards in counter paths expanded
-# # CountersRefreshInterval="1m"
-#
-# ## Accepts a list of PDH error codes which are defined in pdh.go, if this
-# ## error is encountered it will be ignored. For example, you can provide
-# ## "PDH_NO_DATA" to ignore performance counters with no instances. By default
-# ## no errors are ignored You can find the list here:
-# ## https://github.com/influxdata/telegraf/blob/master/plugins/inputs/win_perf_counters/pdh.go
-# ## e.g. IgnoredErrors = ["PDH_NO_DATA"]
-# # IgnoredErrors = []
-#
-# ## Maximum size of the buffer for values returned by the API
-# ## Increase this value if you experience "buffer limit reached" errors.
-# # MaxBufferSize = "4MiB"
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# # [[inputs.win_perf_counters.object]]
-# # Measurement = ""
-# # ObjectName = ""
-# # Instances = [""]
-# # Counters = []
-# ## Additional Object Settings
-# ## * IncludeTotal: set to true to include _Total instance when querying
-# ## for all metrics via '*'
-# ## * WarnOnMissing: print out when the performance counter is missing
-# ## from object, counter or instance
-# ## * UseRawValues: gather raw values instead of formatted. Raw values are
-# ## stored in the field name with the "_Raw" suffix, e.g.
-# ## "Disk_Read_Bytes_sec_Raw".
-# # IncludeTotal = false
-# # WarnOnMissing = false
-# # UseRawValues = false
-#
-# ## Processor usage, alternative to native, reports on a per core.
-# # [[inputs.win_perf_counters.object]]
-# # Measurement = "win_cpu"
-# # ObjectName = "Processor"
-# # Instances = ["*"]
-# # UseRawValues = true
-# # Counters = [
-# # "% Idle Time",
-# # "% Interrupt Time",
-# # "% Privileged Time",
-# # "% User Time",
-# # "% Processor Time",
-# # "% DPC Time",
-# # ]
-#
-# ## Disk times and queues
-# # [[inputs.win_perf_counters.object]]
-# # Measurement = "win_disk"
-# # ObjectName = "LogicalDisk"
-# # Instances = ["*"]
-# # Counters = [
-# # "% Idle Time",
-# # "% Disk Time",
-# # "% Disk Read Time",
-# # "% Disk Write Time",
-# # "% User Time",
-# # "% Free Space",
-# # "Current Disk Queue Length",
-# # "Free Megabytes",
-# # ]
-#
-# # [[inputs.win_perf_counters.object]]
-# # Measurement = "win_diskio"
-# # ObjectName = "PhysicalDisk"
-# # Instances = ["*"]
-# # Counters = [
-# # "Disk Read Bytes/sec",
-# # "Disk Write Bytes/sec",
-# # "Current Disk Queue Length",
-# # "Disk Reads/sec",
-# # "Disk Writes/sec",
-# # "% Disk Time",
-# # "% Disk Read Time",
-# # "% Disk Write Time",
-# # ]
-#
-# # [[inputs.win_perf_counters.object]]
-# # Measurement = "win_net"
-# # ObjectName = "Network Interface"
-# # Instances = ["*"]
-# # Counters = [
-# # "Bytes Received/sec",
-# # "Bytes Sent/sec",
-# # "Packets Received/sec",
-# # "Packets Sent/sec",
-# # "Packets Received Discarded",
-# # "Packets Outbound Discarded",
-# # "Packets Received Errors",
-# # "Packets Outbound Errors",
-# # ]
-#
-# # [[inputs.win_perf_counters.object]]
-# # Measurement = "win_system"
-# # ObjectName = "System"
-# # Instances = ["------"]
-# # Counters = [
-# # "Context Switches/sec",
-# # "System Calls/sec",
-# # "Processor Queue Length",
-# # "System Up Time",
-# # ]
-#
-# ## Example counterPath where the Instance portion must be removed to get
-# ## data back, such as from the Memory object.
-# # [[inputs.win_perf_counters.object]]
-# # Measurement = "win_mem"
-# # ObjectName = "Memory"
-# ## Use 6 x - to remove the Instance bit from the counterPath.
-# # Instances = ["------"]
-# # Counters = [
-# # "Available Bytes",
-# # "Cache Faults/sec",
-# # "Demand Zero Faults/sec",
-# # "Page Faults/sec",
-# # "Pages/sec",
-# # "Transition Faults/sec",
-# # "Pool Nonpaged Bytes",
-# # "Pool Paged Bytes",
-# # "Standby Cache Reserve Bytes",
-# # "Standby Cache Normal Priority Bytes",
-# # "Standby Cache Core Bytes",
-# # ]
-#
-# ## Example query where the Instance portion must be removed to get data back,
-# ## such as from the Paging File object.
-# # [[inputs.win_perf_counters.object]]
-# # Measurement = "win_swap"
-# # ObjectName = "Paging File"
-# # Instances = ["_Total"]
-# # Counters = [
-# # "% Usage",
-# # ]
-
-
-# # Input plugin to report Windows services info.
-# # This plugin ONLY supports Windows
-# [[inputs.win_services]]
-# ## Names of the services to monitor. Leave empty to monitor all the available
-# ## services on the host. Globs accepted. Case insensitive.
-# service_names = [
-# "LanmanServer",
-# "TermService",
-# "Win*",
-# ]
-#
-# # optional, list of service names to exclude
-# excluded_service_names = ['WinRM']
-
-
-# # Input plugin to query Windows Management Instrumentation
-# # This plugin ONLY supports Windows
-# [[inputs.win_wmi]]
-# ## Hostname or IP for remote connections, by default the local machine is queried
-# # host = ""
-# ## Credentials for the connection, by default no credentials are used
-# # username = ""
-# # password = ""
-#
-# ## WMI query to execute, multiple methods are possible
-# [[inputs.win_wmi.query]]
-# ## Namespace, class and a list of properties to use in the WMI query
-# namespace = "root\\cimv2"
-# class_name = "Win32_Volume"
-# properties = ["Name", "Capacity", "FreeSpace"]
-# ## Optional WHERE clause for the WQL query
-# # filter = 'NOT Name LIKE "\\\\?\\%"'
-# ## Returned properties to use as tags instead of fields
-# # tag_properties = ["Name"]
-#
-# # ## WMI method to invoke, multiple methods are possible
-# # [[inputs.win_wmi.method]]
-# # ## WMI namespace, class and method to use
-# # namespace = 'root\default'
-# # class_name = "StdRegProv"
-# # method = "GetStringValue"
-# # ## Returned WMI method values to use as tags instead of fields
-# # # tag_properties = ["ReturnValue"]
-# # ## Named arguments for the method call
-# # [inputs.win_wmi.method.arguments]
-# # hDefKey = '2147483650'
-# # sSubKeyName = 'Software\Microsoft\windows NT\CurrentVersion'
-# # sValueName = 'ProductName'
-# # ## Mapping of the name of the returned property to a field-name
-# # [inputs.win_wmi.method.fields]
-# # sValue = "product_name"
-
-
-# # Collect Wireguard server interface and peer statistics
-# [[inputs.wireguard]]
-# ## Optional list of Wireguard device/interface names to query.
-# ## If omitted, all Wireguard interfaces are queried.
-# # devices = ["wg0"]
-
-
-# # Monitor wifi signal strength and quality
-# # This plugin ONLY supports Linux
-# [[inputs.wireless]]
-# ## Sets 'proc' directory path
-# ## If not specified, then default is /proc
-# # host_proc = "/proc"
-
-
-# # Reads metrics from a SSL certificate
-# [[inputs.x509_cert]]
-# ## List certificate sources, support wildcard expands for files
-# ## Prefix your entry with 'file://' if you intend to use relative paths
-# sources = ["tcp://example.org:443", "https://influxdata.com:443",
-# "smtp://mail.localhost:25", "udp://127.0.0.1:4433",
-# "/etc/ssl/certs/ssl-cert-snakeoil.pem",
-# "/etc/mycerts/*.mydomain.org.pem", "file:///path/to/*.pem",
-# "jks:///etc/mycerts/keystore.jks",
-# "pkcs12:///etc/mycerts/keystore.p12",
-# "wincertstore://machine:ROOT", "wincertstore://user:CA"]
-#
-# ## Timeout for SSL connection
-# # timeout = "5s"
-#
-# ## Pass a different name into the TLS request (Server Name Indication).
-# ## This is synonymous with tls_server_name, and only one of the two
-# ## options may be specified at one time.
-# ## example: server_name = "myhost.example.org"
-# # server_name = "myhost.example.org"
-#
-# ## Only output the leaf certificates and omit the root ones.
-# # exclude_root_certs = false
-#
-# ## Pad certificate serial number with zeroes to 128-bits.
-# # pad_serial_with_zeroes = false
-#
-# ## Password to be used with PKCS#12 or JKS files
-# # password = ""
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# # tls_server_name = "myhost.example.org"
-#
-# ## Set the proxy URL
-# # use_proxy = true
-# # proxy_url = "http://localhost:8888"
-
-
-# # Gathers Metrics From a Dell EMC XtremIO Storage Array's V3 API
-# [[inputs.xtremio]]
-# ## XtremIO User Interface Endpoint
-# url = "https://xtremio.example.com/" # required
-#
-# ## Credentials
-# username = "user1"
-# password = "pass123"
-#
-# ## Metrics to collect from the XtremIO
-# # collectors = ["bbus","clusters","ssds","volumes","xms"]
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use SSL but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read metrics of ZFS from arcstats, zfetchstats, vdev_cache_stats, pools and datasets
-# # This plugin ONLY supports Linux & FreeBSD
-# [[inputs.zfs]]
-# ## ZFS kstat path. Ignored on FreeBSD
-# ## If not specified, then default is:
-# # kstatPath = "/proc/spl/kstat/zfs"
-#
-# ## By default, telegraf gather all zfs stats
-# ## Override the stats list using the kstatMetrics array:
-# ## For FreeBSD, the default is:
-# # kstatMetrics = ["arcstats", "zfetchstats", "vdev_cache_stats"]
-# ## For Linux, the default is:
-# # kstatMetrics = ["abdstats", "arcstats", "dnodestats", "dbufcachestats",
-# # "dmu_tx", "fm", "vdev_mirror_stats", "zfetchstats", "zil"]
-#
-# ## By default, don't gather zpool stats
-# # poolMetrics = false
-#
-# ## By default, don't gather dataset stats
-# # datasetMetrics = false
-#
-# ## Report fields as the type defined by ZFS (Linux only)
-# ## This is disabled for backward compatibility but is STRONGLY RECOMMENDED
-# ## to be enabled to avoid overflows. This requires UINT support on the output
-# ## for most fields.
-# ## useNativeTypes = false
-
-
-# # Reads 'mntr' stats from one or many zookeeper servers
-# [[inputs.zookeeper]]
-# ## An array of address to gather stats about. Specify an ip or hostname
-# ## with port. ie localhost:2181, 10.0.0.1:2181, etc.
-#
-# ## If no servers are specified, then localhost is used as the host.
-# ## If no port is specified, 2181 is used
-# servers = [":2181"]
-#
-# ## Timeout for metric collections from all servers. Minimum timeout is "1s".
-# # timeout = "5s"
-#
-# ## Float Parsing - the initial implementation forced any value unable to be
-# ## parsed as an int to be a string. Setting this to "float" will attempt to
-# ## parse float values as floats and not strings. This would break existing
-# ## metrics and may cause issues if a value switches between a float and int.
-# # parse_floats = "string"
-#
-# ## Optional TLS Config
-# # enable_tls = false
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## If false, skip chain & host verification
-# # insecure_skip_verify = true
-
-
-###############################################################################
-# SERVICE INPUT PLUGINS #
-###############################################################################
-
-
-# # Pull Metric Statistics from Aliyun CMS
-# [[inputs.aliyuncms]]
-# ## Aliyun Credentials
-# ## Credentials are loaded in the following order
-# ## 1) Ram RoleArn credential
-# ## 2) AccessKey STS token credential
-# ## 3) AccessKey credential
-# ## 4) Ecs Ram Role credential
-# ## 5) RSA keypair credential
-# ## 6) Environment variables credential
-# ## 7) Instance metadata credential
-#
-# # access_key_id = ""
-# # access_key_secret = ""
-# # access_key_sts_token = ""
-# # role_arn = ""
-# # role_session_name = ""
-# # private_key = ""
-# # public_key_id = ""
-# # role_name = ""
-#
-# ## Specify ali cloud regions to be queried for metric and object discovery
-# ## If not set, all supported regions (see below) would be covered, it can
-# ## provide a significant load on API, so the recommendation here is to
-# ## limit the list as much as possible.
-# ## Allowed values: https://www.alibabacloud.com/help/zh/doc-detail/40654.htm
-# ## Default supported regions are:
-# ## cn-qingdao,cn-beijing,cn-zhangjiakou,cn-huhehaote,cn-hangzhou,
-# ## cn-shanghai, cn-shenzhen, cn-heyuan,cn-chengdu,cn-hongkong,
-# ## ap-southeast-1,ap-southeast-2,ap-southeast-3,ap-southeast-5,
-# ## ap-south-1,ap-northeast-1, us-west-1,us-east-1,eu-central-1,
-# ## eu-west-1,me-east-1
-# ##
-# ## From discovery perspective it set the scope for object discovery,
-# ## the discovered info can be used to enrich the metrics with objects
-# ## attributes/tags. Discovery is not supported for all projects.
-# ## Currently, discovery supported for the following projects:
-# ## - acs_ecs_dashboard
-# ## - acs_rds_dashboard
-# ## - acs_slb_dashboard
-# ## - acs_vpc_eip
-# regions = ["cn-hongkong"]
-#
-# ## Requested AliyunCMS aggregation Period (required)
-# ## The period must be multiples of 60s and the minimum for AliyunCMS metrics
-# ## is 1 minute (60s). However not all metrics are made available to the
-# ## one minute period. Some are collected at 3 minute, 5 minute, or larger
-# ## intervals.
-# ## See: https://help.aliyun.com/document_detail/51936.html?spm=a2c4g.11186623.2.18.2bc1750eeOw1Pv
-# ## Note that if a period is configured that is smaller than the minimum for
-# ## a particular metric, that metric will not be returned by Aliyun's
-# ## OpenAPI and will not be collected by Telegraf.
-# period = "5m"
-#
-# ## Collection Delay (required)
-# ## The delay must account for metrics availability via AliyunCMS API.
-# delay = "1m"
-#
-# ## Recommended: use metric 'interval' that is a multiple of 'period'
-# ## to avoid gaps or overlap in pulled data
-# interval = "5m"
-#
-# ## Metric Statistic Project (required)
-# project = "acs_slb_dashboard"
-#
-# ## Maximum requests per second, default value is 200
-# ratelimit = 200
-#
-# ## How often the discovery API call executed (default 1m)
-# #discovery_interval = "1m"
-#
-# ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
-# ## plugin definition, otherwise additional config options are read as part of
-# ## the table
-#
-# ## Metrics to Pull
-# ## At least one metrics definition required
-# [[inputs.aliyuncms.metrics]]
-# ## Metrics names to be requested,
-# ## Description can be found here (per project):
-# ## https://help.aliyun.com/document_detail/28619.html?spm=a2c4g.11186623.6.690.1938ad41wg8QSq
-# names = ["InstanceActiveConnection", "InstanceNewConnection"]
-#
-# ## Dimension filters for Metric (optional)
-# ## This allows to get additional metric dimension. If dimension is not
-# ## specified it can be returned or the data can be aggregated - it depends
-# ## on particular metric, you can find details here:
-# ## https://help.aliyun.com/document_detail/28619.html?spm=a2c4g.11186623.6.690.1938ad41wg8QSq
-# ##
-# ## Note, that by default dimension filter includes the list of discovered
-# ## objects in scope (if discovery is enabled). Values specified here would
-# ## be added into the list of discovered objects. You can specify either
-# ## single dimension:
-# # dimensions = '{"instanceId": "p-example"}'
-#
-# ## Or you can specify several dimensions at once:
-# # dimensions = '[{"instanceId": "p-example"},{"instanceId": "q-example"}]'
-#
-# ## Tag Query Path
-# ## The following tags added by default:
-# ## * regionId (if discovery enabled)
-# ## * userId
-# ## * instanceId
-# ## Enrichment tags, can be added from discovery (if supported)
-# ## Notation is
-# ## <measurement_tag_name>:<JMES query path (https://jmespath.org/tutorial.html)>
-# ## To figure out which fields are available, consult the
-# ## Describe<ObjectType> API per project. For example, for SLB see:
-# ## https://api.aliyun.com/#/?product=Slb&version=2014-05-15&api=DescribeLoadBalancers¶ms={}&tab=MOCK&lang=GO
-# # tag_query_path = [
-# # "address:Address",
-# # "name:LoadBalancerName",
-# # "cluster_owner:Tags.Tag[?TagKey=='cs.cluster.name'].TagValue | [0]"
-# # ]
-#
-# ## Allow metrics without discovery data, if discovery is enabled.
-# ## If set to true, then metric without discovery data would be emitted, otherwise dropped.
-# ## This cane be of help, in case debugging dimension filters, or partial coverage of
-# ## discovery scope vs monitoring scope
-# # allow_dps_without_discovery = false
-
-
-# # Query statistics from AMD Graphics cards using rocm-smi binary
-# [[inputs.amd_rocm_smi]]
-# ## Optional: path to rocm-smi binary, defaults to $PATH via exec.LookPath
-# # bin_path = "/opt/rocm/bin/rocm-smi"
-#
-# ## Optional: timeout for GPU polling
-# # timeout = "5s"
-
-
-# # AMQP consumer plugin
-# [[inputs.amqp_consumer]]
-# ## Brokers to consume from. If multiple brokers are specified a random broker
-# ## will be selected anytime a connection is established. This can be
-# ## helpful for load balancing when not using a dedicated load balancer.
-# brokers = ["amqp://localhost:5672/influxdb"]
-#
-# ## Authentication credentials for the PLAIN auth_method.
-# # username = ""
-# # password = ""
-#
-# ## Name of the exchange to declare. If unset, no exchange will be declared.
-# exchange = "telegraf"
-#
-# ## Exchange type; common types are "direct", "fanout", "topic", "header", "x-consistent-hash".
-# # exchange_type = "topic"
-#
-# ## If true, exchange will be passively declared.
-# # exchange_passive = false
-#
-# ## Exchange durability can be either "transient" or "durable".
-# # exchange_durability = "durable"
-#
-# ## Additional exchange arguments.
-# # exchange_arguments = { }
-# # exchange_arguments = {"hash_property" = "timestamp"}
-#
-# ## AMQP queue name.
-# queue = "telegraf"
-#
-# ## AMQP queue durability can be "transient" or "durable".
-# queue_durability = "durable"
-#
-# ## If true, queue will be passively declared.
-# # queue_passive = false
-#
-# ## Additional arguments when consuming from Queue
-# # queue_consume_arguments = { }
-# # queue_consume_arguments = {"x-stream-offset" = "first"}
-#
-# ## Additional queue arguments.
-# # queue_arguments = { }
-# # queue_arguments = {"x-max-length" = 100}
-#
-# ## A binding between the exchange and queue using this binding key is
-# ## created. If unset, no binding is created.
-# binding_key = "#"
-#
-# ## Maximum number of messages server should give to the worker.
-# # prefetch_count = 50
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## Timeout for establishing the connection to a broker
-# # timeout = "30s"
-#
-# ## Auth method. PLAIN and EXTERNAL are supported
-# ## Using EXTERNAL requires enabling the rabbitmq_auth_mechanism_ssl plugin as
-# ## described here: https://www.rabbitmq.com/plugins.html
-# # auth_method = "PLAIN"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Content encoding for message payloads, can be set to
-# ## "gzip", "identity" or "auto"
-# ## - Use "gzip" to decode gzip
-# ## - Use "identity" to apply no encoding
-# ## - Use "auto" determine the encoding using the ContentEncoding header
-# # content_encoding = "identity"
-#
-# ## Maximum size of decoded message.
-# ## Acceptable units are B, KiB, KB, MiB, MB...
-# ## Without quotes and units, interpreted as size in bytes.
-# # max_decompression_size = "500MB"
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-
-
-# # Get standard chrony metrics.
-# [[inputs.chrony]]
-# ## Server address of chronyd with address scheme
-# ## If empty or not set, the plugin will mimic the behavior of chronyc and
-# ## check "unixgram:///run/chrony/chronyd.sock", "udp://127.0.0.1:323"
-# ## and "udp://[::1]:323".
-# # server = ""
-#
-# ## Timeout for establishing the connection
-# # timeout = "5s"
-#
-# ## Try to resolve received addresses to host-names via DNS lookups
-# ## Disabled by default to avoid DNS queries especially for slow DNS servers.
-# # dns_lookup = false
-#
-# ## Metrics to query named according to chronyc commands
-# ## Available settings are:
-# ## activity -- number of peers online or offline
-# ## tracking -- information about system's clock performance
-# ## serverstats -- chronyd server statistics
-# ## sources -- extended information about peers
-# ## sourcestats -- statistics on peers
-# # metrics = ["tracking"]
-#
-# ## Socket group & permissions
-# ## If the user requests collecting metrics via unix socket, then it is created
-# ## with the following group and permissions.
-# # socket_group = "chrony"
-# # socket_perms = "0660"
-
-
-# # Cisco model-driven telemetry (MDT) input plugin for IOS XR, IOS XE and NX-OS platforms
-# [[inputs.cisco_telemetry_mdt]]
-# ## Telemetry transport can be "tcp" or "grpc". TLS is only supported when
-# ## using the grpc transport.
-# transport = "grpc"
-#
-# ## Address and port to host telemetry listener
-# service_address = ":57000"
-#
-# ## Grpc Maximum Message Size, default is 4MB, increase the size. This is
-# ## stored as a uint32, and limited to 4294967295.
-# max_msg_size = 4000000
-#
-# ## Enable TLS; grpc transport only.
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Enable TLS client authentication and define allowed CA certificates; grpc
-# ## transport only.
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Define (for certain nested telemetry measurements with embedded tags) which fields are tags
-# # embedded_tags = ["Cisco-IOS-XR-qos-ma-oper:qos/interface-table/interface/input/service-policy-names/service-policy-instance/statistics/class-stats/class-name"]
-#
-# ## Include the delete field in every telemetry message.
-# # include_delete_field = false
-#
-# ## Specify custom name for incoming MDT source field.
-# # source_field_name = "mdt_source"
-#
-# ## Define aliases to map telemetry encoding paths to simple measurement names
-# [inputs.cisco_telemetry_mdt.aliases]
-# ifstats = "ietf-interfaces:interfaces-state/interface/statistics"
-# ## Define Property Xformation, please refer README and https://pubhub.devnetcloud.com/media/dme-docs-9-3-3/docs/appendix/ for Model details.
-# [inputs.cisco_telemetry_mdt.dmes]
-# # Global Property Xformation.
-# # prop1 = "uint64 to int"
-# # prop2 = "uint64 to string"
-# # prop3 = "string to uint64"
-# # prop4 = "string to int64"
-# # prop5 = "string to float64"
-# # auto-prop-xfrom = "auto-float-xfrom" #Xform any property which is string, and has float number to type float64
-# # Per Path property xformation, Name is telemetry configuration under sensor-group, path configuration "WORD Distinguished Name"
-# # Per Path configuration is better as it avoid property collision issue of types.
-# # dnpath = '{"Name": "show ip route summary","prop": [{"Key": "routes","Value": "string"}, {"Key": "best-paths","Value": "string"}]}'
-# # dnpath2 = '{"Name": "show processes cpu","prop": [{"Key": "kernel_percent","Value": "float"}, {"Key": "idle_percent","Value": "float"}, {"Key": "process","Value": "string"}, {"Key": "user_percent","Value": "float"}, {"Key": "onesec","Value": "float"}]}'
-# # dnpath3 = '{"Name": "show processes memory physical","prop": [{"Key": "processname","Value": "string"}]}'
-#
-# ## Additional GRPC connection settings.
-# [inputs.cisco_telemetry_mdt.grpc_enforcement_policy]
-# ## GRPC permit keepalives without calls, set to true if your clients are
-# ## sending pings without calls in-flight. This can sometimes happen on IOS-XE
-# ## devices where the GRPC connection is left open but subscriptions have been
-# ## removed, and adding subsequent subscriptions does not keep a stable session.
-# # permit_keepalive_without_calls = false
-#
-# ## GRPC minimum timeout between successive pings, decreasing this value may
-# ## help if this plugin is closing connections with ENHANCE_YOUR_CALM (too_many_pings).
-# # keepalive_minimum_time = "5m"
-
-
-# # Read metrics from one or many ClickHouse servers
-# [[inputs.clickhouse]]
-# ## Username for authorization on ClickHouse server
-# username = "default"
-#
-# ## Password for authorization on ClickHouse server
-# # password = ""
-#
-# ## HTTP(s) timeout while getting metrics values
-# ## The timeout includes connection time, any redirects, and reading the
-# ## response body.
-# # timeout = 5s
-#
-# ## List of servers for metrics scraping
-# ## metrics scrape via HTTP(s) clickhouse interface
-# ## https://clickhouse.tech/docs/en/interfaces/http/
-# servers = ["http://127.0.0.1:8123"]
-#
-# ## Server Variant
-# ## When set to "managed", some queries are excluded from being run. This is
-# ## useful for instances hosted in ClickHouse Cloud where certain tables are
-# ## not available.
-# # variant = "self-hosted"
-#
-# ## If "auto_discovery"" is "true" plugin tries to connect to all servers
-# ## available in the cluster with using same "user:password" described in
-# ## "user" and "password" parameters and get this server hostname list from
-# ## "system.clusters" table. See
-# ## - https://clickhouse.tech/docs/en/operations/system_tables/#system-clusters
-# ## - https://clickhouse.tech/docs/en/operations/server_settings/settings/#server_settings_remote_servers
-# ## - https://clickhouse.tech/docs/en/operations/table_engines/distributed/
-# ## - https://clickhouse.tech/docs/en/operations/table_engines/replication/#creating-replicated-tables
-# # auto_discovery = true
-#
-# ## Filter cluster names in "system.clusters" when "auto_discovery" is "true"
-# ## when this filter present then "WHERE cluster IN (...)" filter will apply
-# ## please use only full cluster names here, regexp and glob filters is not
-# ## allowed for "/etc/clickhouse-server/config.d/remote.xml"
-# ## <yandex>
-# ## <remote_servers>
-# ## <my-own-cluster>
-# ## <shard>
-# ## <replica><host>clickhouse-ru-1.local</host><port>9000</port></replica>
-# ## <replica><host>clickhouse-ru-2.local</host><port>9000</port></replica>
-# ## </shard>
-# ## <shard>
-# ## <replica><host>clickhouse-eu-1.local</host><port>9000</port></replica>
-# ## <replica><host>clickhouse-eu-2.local</host><port>9000</port></replica>
-# ## </shard>
-# ## </my-own-cluster>
-# ## </remote_servers>
-# ##
-# ## </yandex>
-# ##
-# ## example: cluster_include = ["my-own-cluster"]
-# # cluster_include = []
-#
-# ## Filter cluster names in "system.clusters" when "auto_discovery" is
-# ## "true" when this filter present then "WHERE cluster NOT IN (...)"
-# ## filter will apply
-# ## example: cluster_exclude = ["my-internal-not-discovered-cluster"]
-# # cluster_exclude = []
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read metrics from Google PubSub
-# [[inputs.cloud_pubsub]]
-# ## Required. Name of Google Cloud Platform (GCP) Project that owns
-# ## the given PubSub subscription.
-# project = "my-project"
-#
-# ## Required. Name of PubSub subscription to ingest metrics from.
-# subscription = "my-subscription"
-#
-# ## Required. Data format to consume.
-# ## Each data format has its own unique set of configuration options.
-# ## Read more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-#
-# ## Optional. Filepath for GCP credentials JSON file to authorize calls to
-# ## PubSub APIs. If not set explicitly, Telegraf will attempt to use
-# ## Application Default Credentials, which is preferred.
-# # credentials_file = "path/to/my/creds.json"
-#
-# ## Optional. Number of seconds to wait before attempting to restart the
-# ## PubSub subscription receiver after an unexpected error.
-# ## If the streaming pull for a PubSub Subscription fails (receiver),
-# ## the agent attempts to restart receiving messages after this many seconds.
-# # retry_delay_seconds = 5
-#
-# ## Optional. Maximum byte length of a message to consume.
-# ## Larger messages are dropped with an error. If less than 0 or unspecified,
-# ## treated as no limit.
-# # max_message_len = 1000000
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## The following are optional Subscription ReceiveSettings in PubSub.
-# ## Read more about these values:
-# ## https://godoc.org/cloud.google.com/go/pubsub/v2#ReceiveSettings
-#
-# ## Optional. Maximum number of seconds for which a PubSub subscription
-# ## should auto-extend the PubSub ACK deadline for each message. If less than
-# ## 0, auto-extension is disabled.
-# # max_extension = 0
-#
-# ## Optional. Maximum number of unprocessed messages in PubSub
-# ## (unacknowledged but not yet expired in PubSub).
-# ## A value of 0 is treated as the default PubSub value.
-# ## Negative values will be treated as unlimited.
-# # max_outstanding_messages = 0
-#
-# ## Optional. Maximum size in bytes of unprocessed messages in PubSub
-# ## (unacknowledged but not yet expired in PubSub).
-# ## A value of 0 is treated as the default PubSub value.
-# ## Negative values will be treated as unlimited.
-# # max_outstanding_bytes = 0
-#
-# ## Optional. Max number of goroutines a PubSub Subscription receiver can spawn
-# ## to pull messages from PubSub concurrently. This limit applies to each
-# ## subscription separately and is treated as the PubSub default if less than
-# ## 1. Note this setting does not limit the number of messages that can be
-# ## processed concurrently (use "max_outstanding_messages" instead).
-# # max_receiver_go_routines = 0
-#
-# ## Optional. If true, Telegraf will attempt to base64 decode the
-# ## PubSub message data before parsing. Many GCP services that
-# ## output JSON to Google PubSub base64-encode the JSON payload.
-# # base64_data = false
-#
-# ## Content encoding for message payloads, can be set to "gzip" or
-# ## "identity" to apply no encoding.
-# # content_encoding = "identity"
-#
-# ## If content encoding is not "identity", sets the maximum allowed size,
-# ## in bytes, for a message payload when it's decompressed. Can be increased
-# ## for larger payloads or reduced to protect against decompression bombs.
-# ## Acceptable units are B, KiB, KB, MiB, MB...
-# # max_decompression_size = "500MB"
-
-
-# # Google Cloud Pub/Sub Push HTTP listener
-# [[inputs.cloud_pubsub_push]]
-# ## Address and port to host HTTP listener on
-# service_address = ":8080"
-#
-# ## Application secret to verify messages originate from Cloud Pub/Sub
-# # token = ""
-#
-# ## Path to listen to.
-# # path = "/"
-#
-# ## Maximum duration before timing out read of the request
-# # read_timeout = "10s"
-# ## Maximum duration before timing out write of the response. This should be
-# ## set to a value large enough that you can send at least 'metric_batch_size'
-# ## number of messages within the duration.
-# # write_timeout = "10s"
-#
-# ## Maximum allowed http request body size in bytes.
-# ## 0 means to use the default of 524,288,00 bytes (500 mebibytes)
-# # max_body_size = "500MB"
-#
-# ## Whether to add the pubsub metadata, such as message attributes and
-# ## subscription as a tag.
-# # add_meta = false
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## Set one or more allowed client CA certificate file names to
-# ## enable mutually authenticated TLS connections
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Add service certificate and key
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-
-
-# # AWS Metric Streams listener
-# [[inputs.cloudwatch_metric_streams]]
-# ## Address and port to host HTTP listener on
-# service_address = ":443"
-#
-# ## Paths to listen to.
-# # paths = ["/telegraf"]
-#
-# ## maximum duration before timing out read of the request
-# # read_timeout = "10s"
-#
-# ## maximum duration before timing out write of the response
-# # write_timeout = "10s"
-#
-# ## Maximum allowed http request body size in bytes.
-# ## 0 means to use the default of 524,288,000 bytes (500 mebibytes)
-# # max_body_size = "500MB"
-#
-# ## Optional access key for Firehose security.
-# # access_key = "test-key"
-#
-# ## An optional flag to keep Metric Streams metrics compatible with
-# ## CloudWatch's API naming
-# # api_compatability = false
-#
-# ## Set one or more allowed client CA certificate file names to
-# ## enable mutually authenticated TLS connections
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Add service certificate and key
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-
-
-# # A ctrlX Data Layer server sent event input plugin
-# [[inputs.ctrlx_datalayer]]
-# ## Hostname or IP address of the ctrlX CORE Data Layer server
-# ## example: server = "localhost" # Telegraf is running directly on the device
-# ## server = "192.168.1.1" # Connect to ctrlX CORE remote via IP
-# ## server = "host.example.com" # Connect to ctrlX CORE remote via hostname
-# ## server = "10.0.2.2:8443" # Connect to ctrlX CORE Virtual from development environment
-# server = "localhost"
-#
-# ## Authentication credentials
-# username = "boschrexroth"
-# password = "boschrexroth"
-#
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Timeout for HTTP requests. (default: "10s")
-# # timeout = "10s"
-#
-#
-# ## Create a ctrlX Data Layer subscription.
-# ## It is possible to define multiple subscriptions per host. Each subscription can have its own
-# ## sampling properties and a list of nodes to subscribe to.
-# ## All subscriptions share the same credentials.
-# [[inputs.ctrlx_datalayer.subscription]]
-# ## The name of the measurement. (default: "ctrlx")
-# measurement = "memory"
-#
-# ## Configure the ctrlX Data Layer nodes which should be subscribed.
-# ## address - node address in ctrlX Data Layer (mandatory)
-# ## name - field name to use in the output (optional, default: base name of address)
-# ## tags - extra node tags to be added to the output metric (optional)
-# ## Note:
-# ## Use either the inline notation or the bracketed notation, not both.
-# ## The tags property is only supported in bracketed notation due to toml parser restrictions
-# ## Examples:
-# ## Inline notation
-# nodes=[
-# {name="available", address="framework/metrics/system/memavailable-mb"},
-# {name="used", address="framework/metrics/system/memused-mb"},
-# ]
-# ## Bracketed notation
-# # [[inputs.ctrlx_datalayer.subscription.nodes]]
-# # name ="available"
-# # address="framework/metrics/system/memavailable-mb"
-# # ## Define extra tags related to node to be added to the output metric (optional)
-# # [inputs.ctrlx_datalayer.subscription.nodes.tags]
-# # node_tag1="node_tag1"
-# # node_tag2="node_tag2"
-# # [[inputs.ctrlx_datalayer.subscription.nodes]]
-# # name ="used"
-# # address="framework/metrics/system/memused-mb"
-#
-# ## The switch "output_json_string" enables output of the measurement as json.
-# ## That way it can be used in in a subsequent processor plugin, e.g. "Starlark Processor Plugin".
-# # output_json_string = false
-#
-# ## Define extra tags related to subscription to be added to the output metric (optional)
-# # [inputs.ctrlx_datalayer.subscription.tags]
-# # subscription_tag1 = "subscription_tag1"
-# # subscription_tag2 = "subscription_tag2"
-#
-# ## The interval in which messages shall be sent by the ctrlX Data Layer to this plugin. (default: 1s)
-# ## Higher values reduce load on network by queuing samples on server side and sending as a single TCP packet.
-# # publish_interval = "1s"
-#
-# ## The interval a "keepalive" message is sent if no change of data occurs. (default: 60s)
-# ## Only used internally to detect broken network connections.
-# # keep_alive_interval = "60s"
-#
-# ## The interval an "error" message is sent if an error was received from a node. (default: 10s)
-# ## Higher values reduce load on output target and network in case of errors by limiting frequency of error messages.
-# # error_interval = "10s"
-#
-# ## The interval that defines the fastest rate at which the node values should be sampled and values captured. (default: 1s)
-# ## The sampling frequency should be adjusted to the dynamics of the signal to be sampled.
-# ## Higher sampling frequencies increases load on ctrlX Data Layer.
-# ## The sampling frequency can be higher, than the publish interval. Captured samples are put in a queue and sent in publish interval.
-# ## Note: The minimum sampling interval can be overruled by a global setting in the ctrlX Data Layer configuration ('datalayer/subscriptions/settings').
-# # sampling_interval = "1s"
-#
-# ## The requested size of the node value queue. (default: 10)
-# ## Relevant if more values are captured than can be sent.
-# # queue_size = 10
-#
-# ## The behaviour of the queue if it is full. (default: "DiscardOldest")
-# ## Possible values:
-# ## - "DiscardOldest"
-# ## The oldest value gets deleted from the queue when it is full.
-# ## - "DiscardNewest"
-# ## The newest value gets deleted from the queue when it is full.
-# # queue_behaviour = "DiscardOldest"
-#
-# ## The filter when a new value will be sampled. (default: 0.0)
-# ## Calculation rule: If (abs(lastCapturedValue - newValue) > dead_band_value) capture(newValue).
-# # dead_band_value = 0.0
-#
-# ## The conditions on which a sample should be captured and thus will be sent as a message. (default: "StatusValue")
-# ## Possible values:
-# ## - "Status"
-# ## Capture the value only, when the state of the node changes from or to error state. Value changes are ignored.
-# ## - "StatusValue"
-# ## Capture when the value changes or the node changes from or to error state.
-# ## See also 'dead_band_value' for what is considered as a value change.
-# ## - "StatusValueTimestamp":
-# ## Capture even if the value is the same, but the timestamp of the value is newer.
-# ## Note: This might lead to high load on the network because every sample will be sent as a message
-# ## even if the value of the node did not change.
-# # value_change = "StatusValue"
-#
-
-
-# # Ingests files in a directory and then moves them to a target directory.
-# [[inputs.directory_monitor]]
-# ## The directory to monitor and read files from (including sub-directories if "recursive" is true).
-# directory = ""
-# #
-# ## The directory to move finished files to (maintaining directory hierarchy from source).
-# finished_directory = ""
-# #
-# ## Setting recursive to true will make the plugin recursively walk the directory and process all sub-directories.
-# # recursive = false
-# #
-# ## The directory to move files to upon file error.
-# ## If not provided, erroring files will stay in the monitored directory.
-# # error_directory = ""
-# #
-# ## The amount of time a file is allowed to sit in the directory before it is picked up.
-# ## This time can generally be low but if you choose to have a very large file written to the directory and it's potentially slow,
-# ## set this higher so that the plugin will wait until the file is fully copied to the directory.
-# # directory_duration_threshold = "50ms"
-# #
-# ## A list of the only file names to monitor, if necessary. Supports regex. If left blank, all files are ingested.
-# # files_to_monitor = ["^.*\\.csv"]
-# #
-# ## A list of files to ignore, if necessary. Supports regex.
-# # files_to_ignore = [".DS_Store"]
-# #
-# ## Maximum lines of the file to process that have not yet be written by the
-# ## output. For best throughput set to the size of the output's metric_buffer_limit.
-# ## Warning: setting this number higher than the output's metric_buffer_limit can cause dropped metrics.
-# # max_buffered_metrics = 10000
-# #
-# ## The maximum amount of file paths to queue up for processing at once, before waiting until files are processed to find more files.
-# ## Lowering this value will result in *slightly* less memory use, with a potential sacrifice in speed efficiency, if absolutely necessary.
-# # file_queue_size = 100000
-# #
-# ## Name a tag containing the name of the file the data was parsed from. Leave empty
-# ## to disable. Cautious when file name variation is high, this can increase the cardinality
-# ## significantly. Read more about cardinality here:
-# ## https://docs.influxdata.com/influxdb/cloud/reference/glossary/#series-cardinality
-# # file_tag = ""
-# #
-# ## Specify if the file can be read completely at once or if it needs to be read line by line (default).
-# ## Possible values: "line-by-line", "at-once"
-# # parse_method = "line-by-line"
-# #
-# ## The dataformat to be read from the files.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-
-
-# # Read metrics about docker containers
-# [[inputs.docker]]
-# ## Docker Endpoint
-# ## To use TCP, set endpoint = "tcp://[ip]:[port]"
-# ## To use environment variables (ie, docker-machine), set endpoint = "ENV"
-# endpoint = "unix:///var/run/docker.sock"
-#
-# ## Set to true to collect Swarm metrics(desired_replicas, running_replicas)
-# ## Note: configure this in one of the manager nodes in a Swarm cluster.
-# ## configuring in multiple Swarm managers results in duplication of metrics.
-# gather_services = false
-#
-# ## Set the source tag for the metrics to the container ID hostname, eg first 12 chars
-# source_tag = false
-#
-# ## Containers to include and exclude. Collect all if empty. Globs accepted.
-# container_name_include = []
-# container_name_exclude = []
-#
-# ## Container states to include and exclude. Globs accepted.
-# ## When empty only containers in the "running" state will be captured.
-# ## example: container_state_include = ["created", "restarting", "running", "removing", "paused", "exited", "dead"]
-# ## example: container_state_exclude = ["created", "restarting", "running", "removing", "paused", "exited", "dead"]
-# # container_state_include = []
-# # container_state_exclude = []
-#
-# ## Objects to include for disk usage query
-# ## Allowed values are "container", "image", "volume"
-# ## When empty disk usage is excluded
-# storage_objects = []
-#
-# ## Timeout for docker list, info, and stats commands
-# timeout = "5s"
-#
-# ## Podman compatibility settings (auto-enabled when Podman detected)
-# ## Cache TTL for accurate CPU percentage calculation (default: 60s)
-# ## Set higher than your collection interval for accurate measurements
-# ## Set to 0 to keep cache entries forever (not recommended for dynamic environments)
-# # podman_cache_ttl = "60s"
-#
-# ## Specifies for which classes a per-device metric should be issued
-# ## Possible values are 'cpu' (cpu0, cpu1, ...), 'blkio' (8:0, 8:1, ...) and 'network' (eth0, eth1, ...)
-# # perdevice_include = ["cpu"]
-#
-# ## Specifies for which classes a total metric should be issued. Total is an aggregated of the 'perdevice_include' values.
-# ## Possible values are 'cpu', 'blkio' and 'network'
-# ## Total 'cpu' is reported directly by Docker daemon, and 'network' and 'blkio' totals are aggregated by this plugin.
-# # total_include = ["cpu", "blkio", "network"]
-#
-# ## docker labels to include and exclude as tags. Globs accepted.
-# ## Note that an empty array for both will include all labels as tags
-# docker_label_include = []
-# docker_label_exclude = []
-#
-# ## Which environment variables should we use as a tag
-# tag_env = ["JAVA_HOME", "HEAP_SIZE"]
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Read logging output from the Docker engine
-# [[inputs.docker_log]]
-# ## Docker Endpoint
-# ## To use TCP, set endpoint = "tcp://[ip]:[port]"
-# ## To use environment variables (ie, docker-machine), set endpoint = "ENV"
-# # endpoint = "unix:///var/run/docker.sock"
-#
-# ## When true, container logs are read from the beginning; otherwise reading
-# ## begins at the end of the log. If state-persistence is enabled for Telegraf,
-# ## the reading continues at the last previously processed timestamp.
-# # from_beginning = false
-#
-# ## Timeout for Docker API calls.
-# # timeout = "5s"
-#
-# ## Containers to include and exclude. Globs accepted.
-# ## Note that an empty array for both will include all containers
-# # container_name_include = []
-# # container_name_exclude = []
-#
-# ## Container states to include and exclude. Globs accepted.
-# ## When empty only containers in the "running" state will be captured.
-# # container_state_include = []
-# # container_state_exclude = []
-#
-# ## docker labels to include and exclude as tags. Globs accepted.
-# ## Note that an empty array for both will include all labels as tags
-# # docker_label_include = []
-# # docker_label_exclude = []
-#
-# ## Set the source tag for the metrics to the container ID hostname, eg first 12 chars
-# source_tag = false
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Reads metrics from DPDK applications using v2 telemetry interface.
-# # This plugin ONLY supports Linux
-# [[inputs.dpdk]]
-# ## Path to DPDK telemetry socket. This shall point to v2 version of DPDK
-# ## telemetry interface.
-# # socket_path = "/var/run/dpdk/rte/dpdk_telemetry.v2"
-#
-# ## Duration that defines how long the connected socket client will wait for
-# ## a response before terminating connection.
-# ## This includes both writing to and reading from socket. Since it's local
-# ## socket access to a fast packet processing application, the timeout should
-# ## be sufficient for most users.
-# ## Setting the value to 0 disables the timeout (not recommended)
-# # socket_access_timeout = "200ms"
-#
-# ## Enables telemetry data collection for selected device types.
-# ## Adding "ethdev" enables collection of telemetry from DPDK NICs (stats, xstats, link_status, info).
-# ## Adding "rawdev" enables collection of telemetry from DPDK Raw Devices (xstats).
-# # device_types = ["ethdev"]
-#
-# ## List of custom, application-specific telemetry commands to query
-# ## The list of available commands depend on the application deployed.
-# ## Applications can register their own commands via telemetry library API
-# ## https://doc.dpdk.org/guides/prog_guide/telemetry_lib.html#registering-commands
-# ## For L3 Forwarding with Power Management Sample Application this could be:
-# ## additional_commands = ["/l3fwd-power/stats"]
-# # additional_commands = []
-#
-# ## List of plugin options.
-# ## Supported options:
-# ## - "in_memory" option enables reading for multiple sockets when a dpdk application is running with --in-memory option.
-# ## When option is enabled plugin will try to find additional socket paths related to provided socket_path.
-# ## Details: https://doc.dpdk.org/guides/howto/telemetry.html#connecting-to-different-dpdk-processes
-# # plugin_options = ["in_memory"]
-#
-# ## Specifies plugin behavior regarding unreachable socket (which might not have been initialized yet).
-# ## Available choices:
-# ## - error: Telegraf will return an error during the startup and gather phases if socket is unreachable
-# ## - ignore: Telegraf will ignore error regarding unreachable socket on both startup and gather
-# # unreachable_socket_behavior = "error"
-#
-# ## List of metadata fields which will be added to every metric produced by the plugin.
-# ## Supported options:
-# ## - "pid" - exposes PID of DPDK process. Example: pid=2179660i
-# ## - "version" - exposes version of DPDK. Example: version="DPDK 21.11.2"
-# # metadata_fields = ["pid", "version"]
-#
-# ## Allows turning off collecting data for individual "ethdev" commands.
-# ## Remove "/ethdev/link_status" from list to gather link status metrics.
-# [inputs.dpdk.ethdev]
-# exclude_commands = ["/ethdev/link_status"]
-#
-# ## When running multiple instances of the plugin it's recommended to add a
-# ## unique tag to each instance to identify metrics exposed by an instance
-# ## of DPDK application. This is useful when multiple DPDK apps run on a
-# ## single host.
-# ## [inputs.dpdk.tags]
-# ## dpdk_instance = "my-fwd-app"
-
-
-# # Read stats from one or more Elasticsearch servers or clusters
-# [[inputs.elasticsearch]]
-# ## specify a list of one or more Elasticsearch servers
-# ## you can add username and password to your url to use basic authentication:
-# ## servers = ["http://user:pass@localhost:9200"]
-# servers = ["http://localhost:9200"]
-#
-# ## HTTP headers to send with each request
-# # headers = { "X-Custom-Header" = "Custom" }
-#
-# ## When local is true (the default), the node will read only its own stats.
-# ## Set local to false when you want to read the node stats from all nodes
-# ## of the cluster.
-# local = true
-#
-# ## Set cluster_health to true when you want to obtain cluster health stats
-# cluster_health = false
-#
-# ## Adjust cluster_health_level when you want to obtain detailed health stats
-# ## The options are
-# ## - indices (default)
-# ## - cluster
-# # cluster_health_level = "indices"
-#
-# ## Set cluster_stats to true when you want to obtain cluster stats.
-# cluster_stats = false
-#
-# ## Only gather cluster_stats from the master node.
-# ## To work this require local = true
-# cluster_stats_only_from_master = true
-#
-# ## Gather stats from the enrich API
-# # enrich_stats = false
-#
-# ## Indices to collect; can be one or more indices names or _all
-# ## Use of wildcards is allowed. Use a wildcard at the end to retrieve index
-# ## names that end with a changing value, like a date.
-# indices_include = ["_all"]
-#
-# ## One of "shards", "cluster", "indices"
-# ## Currently only "shards" is implemented
-# indices_level = "shards"
-#
-# ## node_stats is a list of sub-stats that you want to have gathered.
-# ## Valid options are "indices", "os", "process", "jvm", "thread_pool",
-# ## "fs", "transport", "http", "breaker". Per default, all stats are gathered.
-# # node_stats = ["jvm", "http"]
-#
-# ## HTTP Basic Authentication username and password.
-# # username = ""
-# # password = ""
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## If 'use_system_proxy' is set to true, Telegraf will check env vars such as
-# ## HTTP_PROXY, HTTPS_PROXY, and NO_PROXY (or their lowercase counterparts).
-# ## If 'use_system_proxy' is set to false (default) and 'http_proxy_url' is
-# ## provided, Telegraf will use the specified URL as HTTP proxy.
-# # use_system_proxy = false
-# # http_proxy_url = "http://localhost:8888"
-#
-# ## Sets the number of most recent indices to return for indices that are
-# ## configured with a date-stamped suffix. Each 'indices_include' entry
-# ## ending with a wildcard (*) or glob matching pattern will group together
-# ## all indices that match it, and sort them by the date or number after
-# ## the wildcard. Metrics then are gathered for only the
-# ## 'num_most_recent_indices' amount of most recent indices.
-# # num_most_recent_indices = 0
-
-
-# # Derive metrics from aggregating Elasticsearch query results
-# [[inputs.elasticsearch_query]]
-# ## The full HTTP endpoint URL for your Elasticsearch instance
-# ## Multiple urls can be specified as part of the same cluster,
-# ## this means that only ONE of the urls will be written to each interval.
-# urls = [ "http://node1.es.example.com:9200" ] # required.
-#
-# ## Elasticsearch client timeout, defaults to "5s".
-# # timeout = "5s"
-#
-# ## Set to true to ask Elasticsearch a list of all cluster nodes,
-# ## thus it is not necessary to list all nodes in the urls config option
-# # enable_sniffer = false
-#
-# ## Set the interval to check if the Elasticsearch nodes are available
-# ## This option is only used if enable_sniffer is also set (0s to disable it)
-# # health_check_interval = "10s"
-#
-# ## HTTP basic authentication details (eg. when using x-pack)
-# # username = "telegraf"
-# # password = "mypassword"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## If 'use_system_proxy' is set to true, Telegraf will check env vars such as
-# ## HTTP_PROXY, HTTPS_PROXY, and NO_PROXY (or their lowercase counterparts).
-# ## If 'use_system_proxy' is set to false (default) and 'http_proxy_url' is
-# ## provided, Telegraf will use the specified URL as HTTP proxy.
-# # use_system_proxy = false
-# # http_proxy_url = "http://localhost:8888"
-#
-# [[inputs.elasticsearch_query.aggregation]]
-# ## measurement name for the results of the aggregation query
-# measurement_name = "measurement"
-#
-# ## Elasticsearch indexes to query (accept wildcards).
-# index = "index-*"
-#
-# ## The date/time field in the Elasticsearch index (mandatory).
-# date_field = "@timestamp"
-#
-# ## If the field used for the date/time field in Elasticsearch is also using
-# ## a custom date/time format it may be required to provide the format to
-# ## correctly parse the field.
-# ##
-# ## If using one of the built in elasticsearch formats this is not required.
-# # date_field_custom_format = ""
-#
-# ## Time window to query (eg. "1m" to query documents from last minute).
-# ## Normally should be set to same as collection interval
-# query_period = "1m"
-#
-# ## Lucene query to filter results
-# # filter_query = "*"
-#
-# ## Fields to aggregate values (must be numeric fields)
-# # metric_fields = ["metric"]
-#
-# ## Aggregation function to use on the metric fields
-# ## Must be set if 'metric_fields' is set
-# ## Valid values are: avg, sum, min, max, sum
-# # metric_function = "avg"
-#
-# ## Fields to be used as tags
-# ## Must be text, non-analyzed fields. Metric aggregations are performed
-# ## per tag
-# # tags = ["field.keyword", "field2.keyword"]
-#
-# ## Set to true to not ignore documents when the tag(s) above are missing
-# # include_missing_tag = false
-#
-# ## String value of the tag when the tag does not exist
-# ## Used when include_missing_tag is true
-# # missing_tag_value = "null"
-
-
-# # Azure Event Hubs service input plugin
-# [[inputs.eventhub_consumer]]
-# ## The default behavior is to create a new Event Hub client from environment variables.
-# ## This requires one of the following sets of environment variables to be set:
-# ##
-# ## 1) Expected Environment Variables:
-# ## - "EVENTHUB_CONNECTION_STRING"
-# ##
-# ## 2) Expected Environment Variables:
-# ## - "EVENTHUB_NAMESPACE"
-# ## - "EVENTHUB_NAME"
-# ## - "EVENTHUB_KEY_NAME"
-# ## - "EVENTHUB_KEY_VALUE"
-#
-# ## 3) Expected Environment Variables:
-# ## - "EVENTHUB_NAMESPACE"
-# ## - "EVENTHUB_NAME"
-# ## - "AZURE_TENANT_ID"
-# ## - "AZURE_CLIENT_ID"
-# ## - "AZURE_CLIENT_SECRET"
-#
-# ## Uncommenting the option below will create an Event Hub client based solely on the connection string.
-# ## This can either be the associated environment variable or hard coded directly.
-# ## If this option is uncommented, environment variables will be ignored.
-# ## Connection string should contain EventHubName (EntityPath)
-# # connection_string = ""
-#
-# ## Set persistence directory to a valid folder to use a file persister instead of an in-memory persister
-# # persistence_dir = ""
-#
-# ## Change the default consumer group
-# # consumer_group = ""
-#
-# ## By default the event hub receives all messages present on the broker, alternative modes can be set below.
-# ## The timestamp should be in https://github.com/toml-lang/toml#offset-date-time format (RFC 3339).
-# ## The 3 options below only apply if no valid persister is read from memory or file (e.g. first run).
-# # from_timestamp =
-# # latest = true
-#
-# ## Set a custom prefetch count for the receiver(s)
-# # prefetch_count = 1000
-#
-# ## Add an epoch to the receiver(s)
-# # epoch = 0
-#
-# ## Change to set a custom user agent, "telegraf" is used by default
-# # user_agent = "telegraf"
-#
-# ## To consume from a specific partition, set the partition_ids option.
-# ## An empty array will result in receiving from all partitions.
-# # partition_ids = ["0","1"]
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## Set either option below to true to use a system property as timestamp.
-# ## You have the choice between EnqueuedTime and IoTHubEnqueuedTime.
-# ## It is recommended to use this setting when the data itself has no timestamp.
-# # enqueued_time_as_ts = true
-# # iot_hub_enqueued_time_as_ts = true
-#
-# ## Tags or fields to create from keys present in the application property bag.
-# ## These could for example be set by message enrichments in Azure IoT Hub.
-# # application_property_tags = []
-# # application_property_fields = []
-#
-# ## Tag or field name to use for metadata
-# ## By default all metadata is disabled
-# # sequence_number_field = "SequenceNumber"
-# # enqueued_time_field = "EnqueuedTime"
-# # offset_field = "Offset"
-# # partition_id_tag = "PartitionID"
-# # partition_key_tag = "PartitionKey"
-# # iot_hub_device_connection_id_tag = "IoTHubDeviceConnectionID"
-# # iot_hub_auth_generation_id_tag = "IoTHubAuthGenerationID"
-# # iot_hub_connection_auth_method_tag = "IoTHubConnectionAuthMethod"
-# # iot_hub_connection_module_id_tag = "IoTHubConnectionModuleID"
-# # iot_hub_enqueued_time_field = "IoTHubEnqueuedTime"
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-
-
-# # Run executable as long-running input plugin
-# [[inputs.execd]]
-# ## One program to run as daemon.
-# ## NOTE: process and each argument should each be their own string
-# command = ["telegraf-smartctl", "-d", "/dev/sda"]
-#
-# ## Environment variables
-# ## Array of "key=value" pairs to pass as environment variables
-# ## e.g. "KEY=value", "USERNAME=John Doe",
-# ## "LD_LIBRARY_PATH=/opt/custom/lib64:/usr/local/libs"
-# # environment = []
-#
-# ## Define how the process is signaled on each collection interval.
-# ## Valid values are:
-# ## "none" : Do not signal anything. (Recommended for service inputs)
-# ## The process must output metrics by itself.
-# ## "STDIN" : Send a newline on STDIN. (Recommended for gather inputs)
-# ## "SIGHUP" : Send a HUP signal. Not available on Windows. (not recommended)
-# ## "SIGUSR1" : Send a USR1 signal. Not available on Windows.
-# ## "SIGUSR2" : Send a USR2 signal. Not available on Windows.
-# # signal = "none"
-#
-# ## Delay before the process is restarted after an unexpected termination
-# # restart_delay = "10s"
-#
-# ## Buffer size used to read from the command output stream
-# ## Optional parameter. Default is 64 Kib, minimum is 16 bytes
-# # buffer_size = "64Kib"
-#
-# ## Disable automatic restart of the program and stop if the program exits
-# ## with an error (i.e. non-zero error code)
-# # stop_on_error = false
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# # data_format = "influx"
-
-
-# # AWS Data Firehose listener
-# [[inputs.firehose]]
-# ## Address and port to host HTTP listener on
-# service_address = ":8080"
-#
-# ## Paths to listen to.
-# # paths = ["/telegraf"]
-#
-# ## maximum duration before timing out read of the request
-# # read_timeout = "5s"
-# ## maximum duration before timing out write of the response
-# # write_timeout = "5s"
-#
-# ## Set one or more allowed client CA certificate file names to
-# ## enable mutually authenticated TLS connections
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Add service certificate and key
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Minimal TLS version accepted by the server
-# # tls_min_version = "TLS12"
-#
-# ## Optional access key to accept for authentication.
-# ## AWS Data Firehose uses "x-amz-firehose-access-key" header to set the access key.
-# ## If no access_key is provided (default), authentication is completely disabled and
-# ## this plugin will accept all request ignoring the provided access-key in the request!
-# # access_key = "foobar"
-#
-# ## Optional setting to add parameters as tags
-# ## If the http header "x-amz-firehose-common-attributes" is not present on the
-# ## request, no corresponding tag will be added. The header value should be a
-# ## json and should follow the schema as describe in the official documentation:
-# ## https://docs.aws.amazon.com/firehose/latest/dev/httpdeliveryrequestresponse.html#requestformat
-# # parameter_tags = ["env"]
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# # data_format = "influx"
-
-
-# # gNMI telemetry input plugin
-# [[inputs.gnmi]]
-# ## Address and port of the gNMI GRPC server
-# addresses = ["10.49.234.114:57777"]
-#
-# ## define credentials
-# username = "cisco"
-# password = "cisco"
-#
-# ## gNMI encoding requested (one of: "proto", "json", "json_ietf", "bytes")
-# # encoding = "proto"
-#
-# ## redial in case of failures after
-# # redial = "10s"
-#
-# ## gRPC Keepalive settings
-# ## See https://pkg.go.dev/google.golang.org/grpc/keepalive
-# ## The client will ping the server to see if the transport is still alive if it has
-# ## not see any activity for the given time.
-# ## If not set, none of the keep-alive setting (including those below) will be applied.
-# ## If set and set below 10 seconds, the gRPC library will apply a minimum value of 10s will be used instead.
-# # keepalive_time = ""
-#
-# ## Timeout for seeing any activity after the keep-alive probe was
-# ## sent. If no activity is seen the connection is closed.
-# # keepalive_timeout = ""
-#
-# ## gRPC Maximum Message Size
-# # max_msg_size = "4MB"
-#
-# ## Subtree depth for depth extension (disables if < 1)
-# ## see https://github.com/openconfig/reference/blob/master/rpc/gnmi/gnmi-depth.md
-# # depth = 0
-#
-# ## Enable to get the canonical path as field-name
-# # canonical_field_names = false
-#
-# ## Remove leading slashes and dots in field-name
-# # trim_field_names = false
-#
-# ## Only receive updates for the state, also suppresses receiving the initial state
-# # updates_only = false
-#
-# ## Enforces the namespace of the first element as origin for aliases and
-# ## response paths, required for backward compatibility.
-# ## NOTE: Set to 'false' if possible but be aware that this might change the path tag!
-# # enforce_first_namespace_as_origin = true
-#
-# ## Guess the path-tag if an update does not contain a prefix-path
-# ## Supported values are
-# ## none -- do not add a 'path' tag
-# ## common path -- use the common path elements of all fields in an update
-# ## subscription -- use the subscription path
-# # path_guessing_strategy = "none"
-#
-# ## Prefix tags from path keys with the path element
-# # prefix_tag_key_with_path = false
-#
-# ## Optional client-side TLS to authenticate the device
-# ## Set to true/false to enforce TLS being enabled/disabled. If not set,
-# ## enable TLS only if any of the other options are specified.
-# # tls_enable =
-# ## Trusted root certificates for server
-# # tls_ca = "/path/to/cafile"
-# ## Used for TLS client certificate authentication
-# # tls_cert = "/path/to/certfile"
-# ## Used for TLS client certificate authentication
-# # tls_key = "/path/to/keyfile"
-# ## Password for the key file if it is encrypted
-# # tls_key_pwd = ""
-# ## Send the specified TLS server name via SNI
-# # tls_server_name = "kubernetes.example.com"
-# ## Minimal TLS version to accept by the client
-# # tls_min_version = "TLS12"
-# ## List of ciphers to accept, by default all secure ciphers will be accepted
-# ## See https://pkg.go.dev/crypto/tls#pkg-constants for supported values.
-# ## Use "all", "secure" and "insecure" to add all support ciphers, secure
-# ## suites or insecure suites respectively.
-# # tls_cipher_suites = ["secure"]
-# ## Renegotiation method, "never", "once" or "freely"
-# # tls_renegotiation_method = "never"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## gNMI subscription prefix (optional, can usually be left empty)
-# ## See: https://github.com/openconfig/reference/blob/master/rpc/gnmi/gnmi-specification.md#222-paths
-# # origin = ""
-# # prefix = ""
-# # target = ""
-#
-# ## Vendor specific options
-# ## This defines what vendor specific options to load.
-# ## * Juniper Header Extension (juniper_header): some sensors are directly managed by
-# ## Linecard, which adds the Juniper GNMI Header Extension. Enabling this
-# ## allows the decoding of the Extension header if present. Currently this knob
-# ## adds component, component_id & sub_component_id as additional tags
-# # vendor_specific = []
-#
-# ## YANG model paths for decoding IETF JSON payloads
-# ## Model files are loaded recursively from the given directories. Disabled if
-# ## no models are specified.
-# # yang_model_paths = []
-#
-# ## Define additional aliases to map encoding paths to measurement names
-# # [inputs.gnmi.aliases]
-# # ifcounters = "openconfig:/interfaces/interface/state/counters"
-#
-# [[inputs.gnmi.subscription]]
-# ## Name of the measurement that will be emitted
-# name = "ifcounters"
-#
-# ## Origin and path of the subscription
-# ## See: https://github.com/openconfig/reference/blob/master/rpc/gnmi/gnmi-specification.md#222-paths
-# ##
-# ## origin usually refers to a (YANG) data model implemented by the device
-# ## and path to a specific substructure inside it that should be subscribed
-# ## to (similar to an XPath). YANG models can be found e.g. here:
-# ## https://github.com/YangModels/yang/tree/master/vendor/cisco/xr
-# origin = "openconfig-interfaces"
-# path = "/interfaces/interface/state/counters"
-#
-# ## Subscription mode ("target_defined", "sample", "on_change") and interval
-# subscription_mode = "sample"
-# sample_interval = "10s"
-#
-# ## Suppress redundant transmissions when measured values are unchanged
-# # suppress_redundant = false
-#
-# ## If suppression is enabled, send updates at least every X seconds anyway
-# # heartbeat_interval = "60s"
-#
-# ## Tag subscriptions are applied as tags to other subscriptions.
-# # [[inputs.gnmi.tag_subscription]]
-# # ## When applying this value as a tag to other metrics, use this tag name
-# # name = "descr"
-# #
-# # ## All other subscription fields are as normal
-# # origin = "openconfig-interfaces"
-# # path = "/interfaces/interface/state"
-# # subscription_mode = "on_change"
-# #
-# # ## Match strategy to use for the tag.
-# # ## Tags are only applied for metrics of the same address. The following
-# # ## settings are valid:
-# # ## unconditional -- always match
-# # ## name -- match by the "name" key
-# # ## This resembles the previous 'tag-only' behavior.
-# # ## elements -- match by the keys in the path filtered by the path
-# # ## parts specified `elements` below
-# # ## By default, 'elements' is used if the 'elements' option is provided,
-# # ## otherwise match by 'name'.
-# # # match = ""
-# #
-# # ## For the 'elements' match strategy, at least one path-element name must
-# # ## be supplied containing at least one key to match on. Multiple path
-# # ## elements can be specified in any order. All given keys must be equal
-# # ## for a match.
-# # # elements = ["description", "interface"]
-
-
-# # Read formatted metrics from one or more HTTP endpoints
-# [[inputs.http]]
-# ## One or more URLs from which to read formatted metrics.
-# urls = [
-# "http://localhost/metrics",
-# "http+unix:///run/user/420/podman/podman.sock:/d/v4.0.0/libpod/pods/json"
-# ]
-#
-# ## HTTP method
-# # method = "GET"
-#
-# ## Optional HTTP headers
-# # headers = {"X-Special-Header" = "Special-Value"}
-#
-# ## HTTP entity-body to send with POST/PUT requests.
-# # body = ""
-#
-# ## HTTP Content-Encoding for write request body, can be set to "gzip" to
-# ## compress body or "identity" to apply no encoding.
-# # content_encoding = "identity"
-#
-# ## Optional Bearer token settings to use for the API calls.
-# ## Use either the token itself or the token file if you need a token.
-# # token = "eyJhbGc...Qssw5c"
-# # token_file = "/path/to/file"
-#
-# ## Optional HTTP Basic Auth Credentials
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## OAuth2 Client Credentials. The options 'client_id', 'client_secret', and 'token_url' are required to use OAuth2.
-# # client_id = "clientid"
-# # client_secret = "secret"
-# # token_url = "https://indentityprovider/oauth2/v1/token"
-# # scopes = ["urn:opc:idm:__myscopes__"]
-#
-# ## HTTP Proxy support
-# # use_system_proxy = false
-# # http_proxy_url = ""
-#
-# ## Optional TLS Config
-# ## Set to true/false to enforce TLS being enabled/disabled. If not set,
-# ## enable TLS only if any of the other options are specified.
-# # tls_enable =
-# ## Trusted root certificates for server
-# # tls_ca = "/path/to/cafile"
-# ## Used for TLS client certificate authentication
-# # tls_cert = "/path/to/certfile"
-# ## Used for TLS client certificate authentication
-# # tls_key = "/path/to/keyfile"
-# ## Password for the key file if it is encrypted
-# # tls_key_pwd = ""
-# ## Send the specified TLS server name via SNI
-# # tls_server_name = "kubernetes.example.com"
-# ## Minimal TLS version to accept by the client
-# # tls_min_version = "TLS12"
-# ## List of ciphers to accept, by default all secure ciphers will be accepted
-# ## See https://pkg.go.dev/crypto/tls#pkg-constants for supported values.
-# ## Use "all", "secure" and "insecure" to add all support ciphers, secure
-# ## suites or insecure suites respectively.
-# # tls_cipher_suites = ["secure"]
-# ## Renegotiation method, "never", "once" or "freely"
-# # tls_renegotiation_method = "never"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Optional Cookie authentication
-# # cookie_auth_url = "https://localhost/authMe"
-# # cookie_auth_method = "POST"
-# # cookie_auth_username = "username"
-# # cookie_auth_password = "pa$$word"
-# # cookie_auth_headers = { Content-Type = "application/json", X-MY-HEADER = "hello" }
-# # cookie_auth_body = '{"username": "user", "password": "pa$$word", "authenticate": "me"}'
-# ## cookie_auth_renewal not set or set to "0" will auth once and never renew the cookie
-# # cookie_auth_renewal = "5m"
-#
-# ## Amount of time allowed to complete the HTTP request
-# # timeout = "5s"
-#
-# ## List of success status codes
-# # success_status_codes = [200]
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# # data_format = "influx"
-#
-
-
-# # Generic HTTP write listener
-# [[inputs.http_listener_v2]]
-# ## Address to host HTTP listener on
-# ## can be prefixed by protocol tcp, or unix if not provided defaults to tcp
-# ## if unix network type provided it should be followed by absolute path for unix socket
-# service_address = "tcp://:8080"
-# ## service_address = "tcp://:8443"
-# ## service_address = "unix:///tmp/telegraf.sock"
-#
-# ## Permission for unix sockets (only available for unix sockets)
-# ## This setting may not be respected by some platforms. To safely restrict
-# ## permissions it is recommended to place the socket into a previously
-# ## created directory with the desired permissions.
-# ## ex: socket_mode = "777"
-# # socket_mode = ""
-#
-# ## Paths to listen to.
-# # paths = ["/telegraf"]
-#
-# ## Save path as http_listener_v2_path tag if set to true
-# # path_tag = false
-#
-# ## HTTP methods to accept.
-# # methods = ["POST", "PUT"]
-#
-# ## Optional HTTP headers
-# ## These headers are applied to the server that is listening for HTTP
-# ## requests and included in responses.
-# # http_headers = {"HTTP_HEADER" = "TAG_NAME"}
-#
-# ## HTTP Return Success Code
-# ## This is the HTTP code that will be returned on success
-# # http_success_code = 204
-#
-# ## maximum duration before timing out read of the request
-# # read_timeout = "10s"
-# ## maximum duration before timing out write of the response
-# # write_timeout = "10s"
-#
-# ## Maximum allowed http request body size in bytes.
-# ## 0 means to use the default of 524,288,000 bytes (500 mebibytes)
-# # max_body_size = "500MB"
-#
-# ## Part of the request to consume. Available options are "body" and
-# ## "query".
-# # data_source = "body"
-#
-# ## Set one or more allowed client CA certificate file names to
-# ## enable mutually authenticated TLS connections
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Add service certificate and key
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Minimal TLS version accepted by the server
-# # tls_min_version = "TLS12"
-#
-# ## Optional username and password to accept for HTTP basic authentication.
-# ## You probably want to make sure you have TLS configured above for this.
-# # basic_username = "foobar"
-# # basic_password = "barfoo"
-#
-# ## Optional setting to map http headers into tags
-# ## If the http header is not present on the request, no corresponding tag will be added
-# ## If multiple instances of the http header are present, only the first value will be used
-# # http_header_tags = {"HTTP_HEADER" = "TAG_NAME"}
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-
-
-# # Accept metrics over InfluxDB 1.x HTTP API
-# [[inputs.influxdb_listener]]
-# ## Address and port to host HTTP listener on
-# service_address = ":8186"
-#
-# ## maximum duration before timing out read of the request
-# read_timeout = "10s"
-# ## maximum duration before timing out write of the response
-# write_timeout = "10s"
-#
-# ## Maximum allowed HTTP request body size in bytes.
-# ## 0 means to use the default of 32MiB.
-# max_body_size = 0
-#
-# ## Set one or more allowed client CA certificate file names to
-# ## enable mutually authenticated TLS connections
-# tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Add service certificate and key
-# tls_cert = "/etc/telegraf/cert.pem"
-# tls_key = "/etc/telegraf/key.pem"
-#
-# ## Optional tag name used to store the database name.
-# ## If the write has a database in the query string then it will be kept in this tag name.
-# ## This tag can be used in downstream outputs.
-# ## The default value of nothing means it will be off and the database will not be recorded.
-# ## If you have a tag that is the same as the one specified below, and supply a database,
-# ## the tag will be overwritten with the database supplied.
-# # database_tag = ""
-#
-# ## If set the retention policy specified in the write query will be added as
-# ## the value of this tag name.
-# # retention_policy_tag = ""
-#
-# ## Optional username and password to accept for HTTP basic authentication
-# ## or authentication token.
-# ## You probably want to make sure you have TLS configured above for this.
-# ## Use these options for the authentication token in the form
-# ## Authentication: Token <basic_username>:<basic_password>
-# # basic_username = "foobar"
-# # basic_password = "barfoo"
-#
-# ## Optional JWT token authentication for HTTP requests
-# ## Please see the documentation at
-# ## https://docs.influxdata.com/influxdb/v1.8/administration/authentication_and_authorization/#authenticate-using-jwt-tokens
-# ## for further details.
-# ## Please note: Token authentication and basic authentication cannot be used
-# ## at the same time.
-# # token_shared_secret = ""
-# # token_username = ""
-#
-# ## Influx line protocol parser
-# ## 'internal' is the default. 'upstream' is a newer parser that is faster
-# ## and more memory efficient.
-# # parser_type = "internal"
-
-
-# # Accept metrics over InfluxDB 2.x HTTP API
-# [[inputs.influxdb_v2_listener]]
-# ## Address and port to host InfluxDB listener on
-# ## (Double check the port. Could be 9999 if using OSS Beta)
-# service_address = ":8086"
-#
-# ## Maximum undelivered metrics before rate limit kicks in.
-# ## When the rate limit kicks in, HTTP status 429 will be returned.
-# ## 0 disables rate limiting
-# # max_undelivered_metrics = 0
-#
-# ## Maximum duration before timing out read of the request
-# # read_timeout = "10s"
-# ## Maximum duration before timing out write of the response
-# # write_timeout = "10s"
-#
-# ## Maximum allowed HTTP request body size in bytes.
-# ## 0 means to use the default of 32MiB.
-# # max_body_size = "32MiB"
-#
-# ## Optional tag to determine the bucket.
-# ## If the write has a bucket in the query string then it will be kept in this tag name.
-# ## This tag can be used in downstream outputs.
-# ## The default value of nothing means it will be off and the database will not be recorded.
-# # bucket_tag = ""
-#
-# ## Set one or more allowed client CA certificate file names to
-# ## enable mutually authenticated TLS connections
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Add service certificate and key
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Optional token to accept for HTTP authentication.
-# ## You probably want to make sure you have TLS configured above for this.
-# # token = "some-long-shared-secret-token"
-#
-# ## Influx line protocol parser
-# ## 'internal' is the default. 'upstream' is a newer parser that is faster
-# ## and more memory efficient.
-# # parser_type = "internal"
-
-
-# # Intel Performance Monitoring Unit plugin exposes Intel PMU metrics available through Linux Perf subsystem
-# # This plugin ONLY supports Linux on amd64
-# [[inputs.intel_pmu]]
-# ## List of filesystem locations of JSON files that contain PMU event definitions.
-# event_definitions = ["/var/cache/pmu/GenuineIntel-6-55-4-core.json", "/var/cache/pmu/GenuineIntel-6-55-4-uncore.json"]
-#
-# ## List of core events measurement entities. There can be more than one core_events sections.
-# [[inputs.intel_pmu.core_events]]
-# ## List of events to be counted. Event names shall match names from event_definitions files.
-# ## Single entry can contain name of the event (case insensitive) augmented with config options and perf modifiers.
-# ## If absent, all core events from provided event_definitions are counted skipping unresolvable ones.
-# events = ["INST_RETIRED.ANY", "CPU_CLK_UNHALTED.THREAD_ANY:config1=0x4043200000000k"]
-#
-# ## Limits the counting of events to core numbers specified.
-# ## If absent, events are counted on all cores.
-# ## Single "0", multiple "0,1,2" and range "0-2" notation is supported for each array element.
-# ## example: cores = ["0,2", "4", "12-16"]
-# cores = ["0"]
-#
-# ## Indicator that plugin shall attempt to run core_events.events as a single perf group.
-# ## If absent or set to false, each event is counted individually. Defaults to false.
-# ## This limits the number of events that can be measured to a maximum of available hardware counters per core.
-# ## Could vary depending on type of event, use of fixed counters.
-# # perf_group = false
-#
-# ## Optionally set a custom tag value that will be added to every measurement within this events group.
-# ## Can be applied to any group of events, unrelated to perf_group setting.
-# # events_tag = ""
-#
-# ## List of uncore event measurement entities. There can be more than one uncore_events sections.
-# [[inputs.intel_pmu.uncore_events]]
-# ## List of events to be counted. Event names shall match names from event_definitions files.
-# ## Single entry can contain name of the event (case insensitive) augmented with config options and perf modifiers.
-# ## If absent, all uncore events from provided event_definitions are counted skipping unresolvable ones.
-# events = ["UNC_CHA_CLOCKTICKS", "UNC_CHA_TOR_OCCUPANCY.IA_MISS"]
-#
-# ## Limits the counting of events to specified sockets.
-# ## If absent, events are counted on all sockets.
-# ## Single "0", multiple "0,1" and range "0-1" notation is supported for each array element.
-# ## example: sockets = ["0-2"]
-# sockets = ["0"]
-#
-# ## Indicator that plugin shall provide an aggregated value for multiple units of same type distributed in an uncore.
-# ## If absent or set to false, events for each unit are exposed as separate metric. Defaults to false.
-# # aggregate_uncore_units = false
-#
-# ## Optionally set a custom tag value that will be added to every measurement within this events group.
-# # events_tag = ""
-
-
-# # Intel PowerStat plugin enables monitoring of platform metrics (power, TDP)
-# # and per-CPU metrics like temperature, power and utilization. Please see the
-# # plugin readme for details on software and hardware compatibility.
-# # This plugin ONLY supports Linux.
-# [[inputs.intel_powerstat]]
-# ## The user can choose which package metrics are monitored by the plugin with
-# ## the package_metrics setting:
-# ## - The default, will collect "current_power_consumption",
-# ## "current_dram_power_consumption" and "thermal_design_power".
-# ## - Leaving this setting empty means no package metrics will be collected.
-# ## - Finally, a user can specify individual metrics to capture from the
-# ## supported options list.
-# ## Supported options:
-# ## "current_power_consumption", "current_dram_power_consumption",
-# ## "thermal_design_power", "max_turbo_frequency", "uncore_frequency",
-# ## "cpu_base_frequency"
-# # package_metrics = ["current_power_consumption", "current_dram_power_consumption", "thermal_design_power"]
-#
-# ## The user can choose which per-CPU metrics are monitored by the plugin in
-# ## cpu_metrics array.
-# ## Empty or missing array means no per-CPU specific metrics will be collected
-# ## by the plugin.
-# ## Supported options:
-# ## "cpu_frequency", "cpu_c0_state_residency", "cpu_c1_state_residency",
-# ## "cpu_c3_state_residency", "cpu_c6_state_residency", "cpu_c7_state_residency",
-# ## "cpu_temperature", "cpu_busy_frequency", "cpu_c0_substate_c01",
-# ## "cpu_c0_substate_c02", "cpu_c0_substate_c0_wait"
-# # cpu_metrics = []
-#
-# ## CPUs metrics to include from those configured in cpu_metrics array
-# ## Can't be combined with excluded_cpus. Empty means all CPUs are gathered.
-# ## e.g. ["0-3", "4,5,6"] or ["1-3,4"]
-# # included_cpus = []
-#
-# ## CPUs metrics to exclude from those configured in cpu_metrics array
-# ## Can't be combined with included_cpus. Empty means all CPUs are gathered.
-# ## e.g. ["0-3", "4,5,6"] or ["1-3,4"]
-# # excluded_cpus = []
-#
-# ## Filesystem location of JSON file that contains PMU event definitions.
-# ## Mandatory only for perf-related metrics (cpu_c0_substate_c01, cpu_c0_substate_c02, cpu_c0_substate_c0_wait).
-# # event_definitions = ""
-#
-# ## The user can set the timeout duration for MSR reading.
-# ## Enabling this timeout can be useful in situations where, on heavily loaded systems,
-# ## the code waits too long for a kernel response to MSR read requests.
-# ## 0 disables the timeout (default).
-# # msr_read_timeout = "0ms"
-
-
-# # Read Intel RDT metrics
-# # This plugin ONLY supports non-Windows
-# [[inputs.intel_rdt]]
-# ## Optionally set sampling interval to Nx100ms.
-# ## This value is propagated to pqos tool. Interval format is defined by pqos itself.
-# ## If not provided or provided 0, will be set to 10 = 10x100ms = 1s.
-# # sampling_interval = "10"
-#
-# ## Optionally specify the path to pqos executable.
-# ## If not provided, auto discovery will be performed.
-# # pqos_path = "/usr/local/bin/pqos"
-#
-# ## Optionally specify if IPC and LLC_Misses metrics shouldn't be propagated.
-# ## If not provided, default value is false.
-# # shortened_metrics = false
-#
-# ## Specify the list of groups of CPU core(s) to be provided as pqos input.
-# ## Mandatory if processes aren't set and forbidden if processes are specified.
-# ## e.g. ["0-3", "4,5,6"] or ["1-3,4"]
-# # cores = ["0-3"]
-#
-# ## Specify the list of processes for which Metrics will be collected.
-# ## Mandatory if cores aren't set and forbidden if cores are specified.
-# ## e.g. ["qemu", "pmd"]
-# # processes = ["process"]
-#
-# ## Specify if the pqos process should be called with sudo.
-# ## Mandatory if the telegraf process does not run as root.
-# # use_sudo = false
-
-
-# # Subscribe and receive OpenConfig Telemetry data using JTI
-# [[inputs.jti_openconfig_telemetry]]
-# ## List of device addresses to collect telemetry from
-# servers = ["localhost:1883"]
-#
-# ## Authentication details. Username and password are must if device expects
-# ## authentication. Client ID must be unique when connecting from multiple instances
-# ## of telegraf to the same device
-# username = "user"
-# password = "pass"
-# client_id = "telegraf"
-#
-# ## Frequency to get data
-# sample_frequency = "1000ms"
-#
-# ## Sensors to subscribe for
-# ## A identifier for each sensor can be provided in path by separating with space
-# ## Else sensor path will be used as identifier
-# ## When identifier is used, we can provide a list of space separated sensors.
-# ## A single subscription will be created with all these sensors and data will
-# ## be saved to measurement with this identifier name
-# sensors = [
-# "/interfaces/",
-# "collection /components/ /lldp",
-# ]
-#
-# ## We allow specifying sensor group level reporting rate. To do this, specify the
-# ## reporting rate in Duration at the beginning of sensor paths / collection
-# ## name. For entries without reporting rate, we use configured sample frequency
-# sensors = [
-# "1000ms customReporting /interfaces /lldp",
-# "2000ms collection /components",
-# "/interfaces",
-# ]
-#
-# ## Timestamp Source
-# ## Set to 'collection' for time of collection, and 'data' for using the time
-# ## provided by the _timestamp field.
-# # timestamp_source = "collection"
-#
-# ## Optional TLS Config
-# # enable_tls = false
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Minimal TLS version to accept by the client
-# # tls_min_version = "TLS12"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Delay between retry attempts of failed RPC calls or streams. Defaults to 1000ms.
-# ## Failed streams/calls will not be retried if 0 is provided
-# retry_delay = "1000ms"
-#
-# ## Period for sending keep-alive packets on idle connections
-# ## This is helpful to identify broken connections to the server
-# # keep_alive_period = "10s"
-#
-# ## To treat all string values as tags, set this to true
-# str_as_tags = false
-
-
-# # Read metrics from Kafka topics
-# [[inputs.kafka_consumer]]
-# ## Kafka brokers.
-# brokers = ["localhost:9092"]
-#
-# ## Set the minimal supported Kafka version. Should be a string contains
-# ## 4 digits in case if it is 0 version and 3 digits for versions starting
-# ## from 1.0.0 separated by dot. This setting enables the use of new
-# ## Kafka features and APIs. Must be 0.10.2.0(used as default) or greater.
-# ## Please, check the list of supported versions at
-# ## https://pkg.go.dev/github.com/Shopify/sarama#SupportedVersions
-# ## ex: kafka_version = "2.6.0"
-# ## ex: kafka_version = "0.10.2.0"
-# # kafka_version = "0.10.2.0"
-#
-# ## Topics to consume.
-# topics = ["telegraf"]
-#
-# ## Topic regular expressions to consume. Matches will be added to topics.
-# ## Example: topic_regexps = [ "*test", "metric[0-9A-z]*" ]
-# # topic_regexps = [ ]
-#
-# ## When set this tag will be added to all metrics with the topic as the value.
-# # topic_tag = ""
-#
-# ## The list of Kafka message headers that should be pass as metric tags
-# ## works only for Kafka version 0.11+, on lower versions the message headers
-# ## are not available
-# # msg_headers_as_tags = []
-#
-# ## The name of kafka message header which value should override the metric name.
-# ## In case when the same header specified in current option and in msg_headers_as_tags
-# ## option, it will be excluded from the msg_headers_as_tags list.
-# # msg_header_as_metric_name = ""
-#
-# ## Set metric(s) timestamp using the given source.
-# ## Available options are:
-# ## metric -- do not modify the metric timestamp
-# ## inner -- use the inner message timestamp (Kafka v0.10+)
-# ## outer -- use the outer (compressed) block timestamp (Kafka v0.10+)
-# # timestamp_source = "metric"
-#
-# ## Optional Client id
-# # client_id = "Telegraf"
-#
-# ## Optional TLS Config
-# # enable_tls = false
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Period between keep alive probes.
-# ## Defaults to the OS configuration if not specified or zero.
-# # keep_alive_period = "15s"
-#
-# ## SASL authentication credentials. These settings should typically be used
-# ## with TLS encryption enabled
-# # sasl_username = ""
-# # sasl_password = ""
-#
-# ## Optional SASL, one of:
-# ## OAUTHBEARER, PLAIN, SCRAM-SHA-256, SCRAM-SHA-512, GSSAPI, AWS-MSK-IAM
-# # sasl_mechanism = ""
-#
-# ## used if sasl_mechanism is GSSAPI
-# # sasl_gssapi_service_name = ""
-# # ## One of: KRB5_USER_AUTH and KRB5_KEYTAB_AUTH
-# # sasl_gssapi_auth_type = "KRB5_USER_AUTH"
-# # sasl_gssapi_kerberos_config_path = "/"
-# # sasl_gssapi_realm = "realm"
-# # sasl_gssapi_key_tab_path = ""
-# # sasl_gssapi_disable_pafxfast = false
-#
-# ## used if sasl_mechanism is OAUTHBEARER
-# # sasl_access_token = ""
-#
-# ## used if sasl_mechanism is AWS-MSK-IAM
-# # sasl_aws_msk_iam_region = ""
-# ## for profile based auth
-# ## sasl_aws_msk_iam_profile = ""
-# ## for role based auth
-# ## sasl_aws_msk_iam_role = ""
-# ## sasl_aws_msk_iam_session = ""
-#
-# ## Arbitrary key value string pairs to pass as a TOML table. For example:
-# ## {logicalCluster = "cluster-042", poolId = "pool-027"}
-# # sasl_extensions = {}
-#
-# ## SASL protocol version. When connecting to Azure EventHub set to 0.
-# # sasl_version = 1
-#
-# # Disable Kafka metadata full fetch
-# # metadata_full = false
-#
-# ## Name of the consumer group.
-# # consumer_group = "telegraf_metrics_consumers"
-#
-# ## Compression codec represents the various compression codecs recognized by
-# ## Kafka in messages.
-# ## 0 : None
-# ## 1 : Gzip
-# ## 2 : Snappy
-# ## 3 : LZ4
-# ## 4 : ZSTD
-# # compression_codec = 0
-# ## Initial offset position; one of "oldest" or "newest".
-# # offset = "oldest"
-#
-# ## Consumer group partition assignment strategy; one of "range", "roundrobin" or "sticky".
-# # balance_strategy = "range"
-#
-# ## Maximum number of retries for metadata operations including
-# ## connecting. Sets Sarama library's Metadata.Retry.Max config value. If 0 or
-# ## unset, use the Sarama default of 3,
-# # metadata_retry_max = 0
-#
-# ## Type of retry backoff. Valid options: "constant", "exponential"
-# # metadata_retry_type = "constant"
-#
-# ## Amount of time to wait before retrying. When metadata_retry_type is
-# ## "constant", each retry is delayed this amount. When "exponential", the
-# ## first retry is delayed this amount, and subsequent delays are doubled. If 0
-# ## or unset, use the Sarama default of 250 ms
-# # metadata_retry_backoff = 0
-#
-# ## Maximum amount of time to wait before retrying when metadata_retry_type is
-# ## "exponential". Ignored for other retry types. If 0, there is no backoff
-# ## limit.
-# # metadata_retry_max_duration = 0
-#
-# ## When set to true, this turns each bootstrap broker address into a set of
-# ## IPs, then does a reverse lookup on each one to get its canonical hostname.
-# ## This list of hostnames then replaces the original address list.
-# ## resolve_canonical_bootstrap_servers_only = false
-#
-# ## Maximum length of a message to consume, in bytes (default 0/unlimited);
-# ## larger messages are dropped
-# max_message_len = 1000000
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## Maximum amount of time the consumer should take to process messages. If
-# ## the debug log prints messages from sarama about 'abandoning subscription
-# ## to [topic] because consuming was taking too long', increase this value to
-# ## longer than the time taken by the output plugin(s).
-# ##
-# ## Note that the effective timeout could be between 'max_processing_time' and
-# ## '2 * max_processing_time'.
-# # max_processing_time = "100ms"
-#
-# ## The default number of message bytes to fetch from the broker in each
-# ## request (default 1MB). This should be larger than the majority of
-# ## your messages, or else the consumer will spend a lot of time
-# ## negotiating sizes and not actually consuming. Similar to the JVM's
-# ## `fetch.message.max.bytes`.
-# # consumer_fetch_default = "1MB"
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# # data_format = "influx"
-
-
-# # Read status information from one or more Kibana servers
-# [[inputs.kibana]]
-# ## Specify a list of one or more Kibana servers
-# servers = ["http://localhost:5601"]
-#
-# ## Timeout for HTTP requests
-# timeout = "5s"
-#
-# ## HTTP Basic Auth credentials
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## If 'use_system_proxy' is set to true, Telegraf will check env vars such as
-# ## HTTP_PROXY, HTTPS_PROXY, and NO_PROXY (or their lowercase counterparts).
-# ## If 'use_system_proxy' is set to false (default) and 'http_proxy_url' is
-# ## provided, Telegraf will use the specified URL as HTTP proxy.
-# # use_system_proxy = false
-# # http_proxy_url = "http://localhost:8888"
-
-
-# # Configuration for the AWS Kinesis input.
-# [[inputs.kinesis_consumer]]
-# ## Amazon REGION of kinesis endpoint.
-# region = "ap-southeast-2"
-#
-# ## Amazon Credentials
-# ## Credentials are loaded in the following order
-# ## 1) Web identity provider credentials via STS if role_arn and web_identity_token_file are specified
-# ## 2) Assumed credentials via STS if role_arn is specified
-# ## 3) explicit credentials from 'access_key' and 'secret_key'
-# ## 4) shared profile from 'profile'
-# ## 5) environment variables
-# ## 6) shared credentials file
-# ## 7) EC2 Instance Profile
-# # access_key = ""
-# # secret_key = ""
-# # token = ""
-# # role_arn = ""
-# # web_identity_token_file = ""
-# # role_session_name = ""
-# # profile = ""
-# # shared_credential_file = ""
-#
-# ## Endpoint to make request against, the correct endpoint is automatically
-# ## determined and this option should only be set if you wish to override the
-# ## default.
-# ## ex: endpoint_url = "http://localhost:8000"
-# # endpoint_url = ""
-#
-# ## Kinesis StreamName must exist prior to starting telegraf.
-# streamname = "StreamName"
-#
-# ## Shard iterator type
-# ## Available options: 'TRIM_HORIZON' (first in non-expired) and 'LATEST'
-# # shard_iterator_type = "TRIM_HORIZON"
-#
-# ## Interval for checking for new records
-# ## Please consider limits for getting records documented here:
-# ## https://docs.aws.amazon.com/streams/latest/dev/service-sizes-and-limits.html
-# # poll_interval = "250ms"
-#
-# ## Interval for scanning for new shards created when resharding
-# ## If set to zero, shards are only scanned once on startup.
-# # shard_update_interval = "30s"
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## Content encoding of the record data
-# ## If you are processing a cloudwatch logs kinesis stream then set this to
-# ## "gzip" as AWS compresses cloudwatch log data before it is sent to kinesis.
-# # content_encoding = "identity"
-#
-# ## Data format of the records to consume
-# ## See https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# # data_format = "influx"
-#
-# ## Optional: Configuration for DynamoDB backend to store positions in the stream
-# # [inputs.kinesis_consumer.checkpoint_dynamodb]
-# # ## Unique name for this consumer
-# # app_name = "default"
-# # ## Table to store the sequence numbers in
-# # table_name = "default"
-# # ## Interval for persisting data to limit write operations
-# # # interval = "10s"
-
-
-# # Listener capable of handling KNX bus messages provided through a KNX-IP Interface.
-# [[inputs.knx_listener]]
-# ## Type of KNX-IP interface.
-# ## Can be either "tunnel_udp", "tunnel_tcp", "tunnel" (alias for tunnel_udp) or "router".
-# # service_type = "tunnel"
-#
-# ## Address of the KNX-IP interface.
-# service_address = "localhost:3671"
-#
-# ## Measurement definition(s)
-# # [[inputs.knx_listener.measurement]]
-# # ## Name of the measurement
-# # name = "temperature"
-# # ## Datapoint-Type (DPT) of the KNX messages
-# # dpt = "9.001"
-# # ## Use the string representation instead of the numerical value for the
-# # ## datapoint-type and the addresses below
-# # # as_string = false
-# # ## List of Group-Addresses (GAs) assigned to the measurement
-# # addresses = ["5/5/1"]
-#
-# # [[inputs.knx_listener.measurement]]
-# # name = "illumination"
-# # dpt = "9.004"
-# # addresses = ["5/5/3"]
-
-
-# # Read metrics off Arista LANZ, via socket
-# [[inputs.lanz]]
-# ## URL to Arista LANZ endpoint
-# servers = [
-# "tcp://switch1.int.example.com:50001",
-# "tcp://switch2.int.example.com:50001",
-# ]
-
-
-# # Read metrics exposed by Logstash
-# [[inputs.logstash]]
-# ## The URL of the exposed Logstash API endpoint.
-# url = "http://127.0.0.1:9600"
-#
-# ## Use Logstash 5 single pipeline API, set to true when monitoring
-# ## Logstash 5.
-# # single_pipeline = false
-#
-# ## Enable optional collection components. Can contain
-# ## "pipelines", "process", and "jvm".
-# # collect = ["pipelines", "process", "jvm"]
-#
-# ## Timeout for HTTP requests.
-# # timeout = "5s"
-#
-# ## Optional HTTP Basic Auth credentials.
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## Optional TLS Config.
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-#
-# ## Use TLS but skip chain & host verification.
-# # insecure_skip_verify = false
-#
-# ## If 'use_system_proxy' is set to true, Telegraf will check env vars such as
-# ## HTTP_PROXY, HTTPS_PROXY, and NO_PROXY (or their lowercase counterparts).
-# ## If 'use_system_proxy' is set to false (default) and 'http_proxy_url' is
-# ## provided, Telegraf will use the specified URL as HTTP proxy.
-# # use_system_proxy = false
-# # http_proxy_url = "http://localhost:8888"
-#
-# ## Optional HTTP headers.
-# # [inputs.logstash.headers]
-# # "X-Special-Header" = "Special-Value"
-
-
-# # Read metrics from a Mavlink flight controller.
-# [[inputs.mavlink]]
-# ## Flight controller URL supporting serial port, UDP and TCP connections.
-# ## Options are documented at
-# ## https://mavsdk.mavlink.io/v1.4/en/cpp/guide/connections.html.
-# ##
-# ## Examples:
-# ## - Serial port: serial:///dev/ttyACM0:57600
-# ## - TCP client: tcp://192.168.1.12:5760
-# ## - UDP client: udp://192.168.1.12:14550
-# ## - TCP server: tcpserver://:5760
-# ## - UDP server: udpserver://:14550
-# # url = "tcp://127.0.0.1:5760"
-#
-# ## Filter to specific messages. Only the messages in this list will be parsed.
-# ## If blank or unset, all messages will be accepted. Glob syntax is accepted.
-# ## Each message in this list should be lowercase camel_case, with "message_"
-# ## prefix removed, eg: "global_position_int", "attitude"
-# # filter = []
-#
-# ## Mavlink system ID for Telegraf. Only used if the mavlink plugin is sending
-# ## messages, eg. when `stream_request_frequency` is 0 (see below.)
-# # system_id = 254
-#
-# ## Determines whether the plugin sends requests to subscribe to data.
-# ## In mavlink, stream rates must be configured before data is received.
-# ## This config item sets the rate in Hz, with 0 disabling the request.
-# ##
-# ## This frequency should be set to 0 if your software already controls the
-# ## rates using REQUEST_DATA_STREAM or MAV_CMD_SET_MESSAGE_INTERVAL
-# ## (See https://mavlink.io/en/mavgen_python/howto_requestmessages.html)
-# # stream_request_frequency = 4
-
-
-# # Read metrics from one or many MongoDB servers
-# [[inputs.mongodb]]
-# ## An array of URLs of the form:
-# ## "mongodb://" [user ":" pass "@"] host [ ":" port]
-# ## For example:
-# ## mongodb://10.10.3.33:18832,
-# ##
-# ## If connecting to a cluster, users must include the "?connect=direct" in
-# ## the URL to ensure that the connection goes directly to the specified node
-# ## and not have all connections passed to the master node.
-# servers = ["mongodb://127.0.0.1:27017/?connect=direct"]
-#
-# ## When true, collect cluster status.
-# ## Note that the query that counts jumbo chunks triggers a COLLSCAN, which
-# ## may have an impact on performance.
-# # gather_cluster_status = true
-#
-# ## When true, collect per database stats
-# # gather_perdb_stats = false
-#
-# ## When true, collect per collection stats
-# # gather_col_stats = false
-#
-# ## When true, collect usage statistics for each collection
-# ## (insert, update, queries, remove, getmore, commands etc...).
-# # gather_top_stat = false
-#
-# ## List of db where collections stats are collected
-# ## If empty, all db are concerned
-# # col_stats_dbs = ["local"]
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Specifies plugin behavior regarding disconnected servers
-# ## Available choices :
-# ## - error: telegraf will return an error on startup if one the servers is unreachable
-# ## - skip: telegraf will skip unreachable servers on both startup and gather
-# # disconnected_servers_behavior = "error"
-
-
-# # Read metrics from MQTT topic(s)
-# [[inputs.mqtt_consumer]]
-# ## Broker URLs for the MQTT server or cluster. To connect to multiple
-# ## clusters or standalone servers, use a separate plugin instance.
-# ## example: servers = ["tcp://localhost:1883"]
-# ## servers = ["ssl://localhost:1883"]
-# ## servers = ["ws://localhost:1883"]
-# servers = ["tcp://127.0.0.1:1883"]
-#
-# ## Topics that will be subscribed to.
-# topics = [
-# "telegraf/host01/cpu",
-# "telegraf/+/mem",
-# "sensors/#",
-# ]
-#
-# ## The message topic will be stored in a tag specified by this value. If set
-# ## to the empty string no topic tag will be created.
-# # topic_tag = "topic"
-#
-# ## QoS policy for messages
-# ## 0 = at most once
-# ## 1 = at least once
-# ## 2 = exactly once
-# ##
-# ## When using a QoS of 1 or 2, you should enable persistent_session to allow
-# ## resuming unacknowledged messages.
-# # qos = 0
-#
-# ## Connection timeout for initial connection in seconds
-# # connection_timeout = "30s"
-#
-# ## Interval and ping timeout for keep-alive messages
-# ## The sum of those options defines when a connection loss is detected.
-# ## Note: The keep-alive interval needs to be greater or equal one second and
-# ## fractions of a second are not supported.
-# # keepalive = "60s"
-# # ping_timeout = "10s"
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## Persistent session disables clearing of the client session on connection.
-# ## In order for this option to work you must also set client_id to identify
-# ## the client. To receive messages that arrived while the client is offline,
-# ## also set the qos option to 1 or 2 and don't forget to also set the QoS when
-# ## publishing. Finally, using a persistent session will use the initial
-# ## connection topics and not subscribe to any new topics even after
-# ## reconnecting or restarting without a change in client ID.
-# # persistent_session = false
-#
-# ## If unset, a random client ID will be generated.
-# # client_id = ""
-#
-# ## Username and password to connect MQTT server.
-# # username = "telegraf"
-# # password = "metricsmetricsmetricsmetrics"
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Client trace messages
-# ## When set to true, and debug mode enabled in the agent settings, the MQTT
-# ## client's messages are included in telegraf logs. These messages are very
-# ## noisey, but essential for debugging issues.
-# # client_trace = false
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-#
-# ## Enable extracting tag values from MQTT topics
-# ## _ denotes an ignored entry in the topic path,
-# ## # denotes a variable length path element (can only be used once per setting)
-# # [[inputs.mqtt_consumer.topic_parsing]]
-# # topic = ""
-# # measurement = ""
-# # tags = ""
-# # fields = ""
-# ## Value supported is int, float, unit
-# # [inputs.mqtt_consumer.topic_parsing.types]
-# # key = type
-
-
-# # Read metrics from NATS subject(s)
-# [[inputs.nats_consumer]]
-# ## urls of NATS servers
-# servers = ["nats://localhost:4222"]
-#
-# ## subject(s) to consume
-# ## If you use jetstream you need to set the subjects
-# ## in jetstream_subjects
-# subjects = ["telegraf"]
-#
-# ## jetstream subjects
-# ## jetstream is a streaming technology inside of nats.
-# ## With jetstream the nats-server persists messages and
-# ## a consumer can consume historical messages. This is
-# ## useful when telegraf needs to restart it don't miss a
-# ## message. You need to configure the nats-server.
-# ## https://docs.nats.io/nats-concepts/jetstream.
-# jetstream_subjects = ["js_telegraf"]
-#
-# ## name a queue group
-# queue_group = "telegraf_consumers"
-#
-# ## Optional authentication with username and password credentials
-# # username = ""
-# # password = ""
-#
-# ## Optional authentication with NATS credentials file (NATS 2.0)
-# # credentials = "/etc/telegraf/nats.creds"
-#
-# ## Optional authentication with nkey seed file (NATS 2.0)
-# # nkey_seed = "/etc/telegraf/seed.txt"
-#
-# ## Use Transport Layer Security
-# # secure = false
-#
-# ## Optional TLS Config
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Sets the limits for pending msgs and bytes for each subscription
-# ## These shouldn't need to be adjusted except in very high throughput scenarios
-# # pending_message_limit = 65536
-# # pending_bytes_limit = 67108864
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-
-
-# # Read energy data from the local Neoom Beaam gateway
-# [[inputs.neoom_beaam]]
-# ## Address of the gateway
-# # address = "https://10.10.10.10"
-#
-# ## Bearer token for accessing the data
-# # token = ""
-#
-# ## Enforce refreshing the site configuration in each gather cycle
-# # refresh_configuration = false
-#
-# ## Optional TLS Config
-# ## Set to true/false to enforce TLS being enabled/disabled. If not set,
-# ## enable TLS only if any of the other options are specified.
-# # tls_enable =
-# ## Trusted root certificates for server
-# # tls_ca = "/path/to/cafile"
-# ## Used for TLS client certificate authentication
-# # tls_cert = "/path/to/certfile"
-# ## Used for TLS client certificate authentication
-# # tls_key = "/path/to/keyfile"
-# ## Password for the key file if it is encrypted
-# # tls_key_pwd = ""
-# ## Send the specified TLS server name via SNI
-# # tls_server_name = "kubernetes.example.com"
-# ## Minimal TLS version to accept by the client
-# # tls_min_version = "TLS12"
-# ## List of ciphers to accept, by default all secure ciphers will be accepted
-# ## See https://pkg.go.dev/crypto/tls#pkg-constants for supported values.
-# ## Use "all", "secure" and "insecure" to add all support ciphers, secure
-# ## suites or insecure suites respectively.
-# # tls_cipher_suites = ["secure"]
-# ## Renegotiation method, "never", "once" or "freely"
-# # tls_renegotiation_method = "never"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-
-
-# # Netflow v5, Netflow v9 and IPFIX collector
-# [[inputs.netflow]]
-# ## Address to listen for netflow,ipfix or sflow packets.
-# ## example: service_address = "udp://:2055"
-# ## service_address = "udp4://:2055"
-# ## service_address = "udp6://:2055"
-# service_address = "udp://:2055"
-#
-# ## Set the size of the operating system's receive buffer.
-# ## example: read_buffer_size = "64KiB"
-# ## Uses the system's default if not set.
-# # read_buffer_size = ""
-#
-# ## Protocol version to use for decoding.
-# ## Available options are
-# ## "ipfix" -- IPFIX / Netflow v10 protocol (also works for Netflow v9)
-# ## "netflow v5" -- Netflow v5 protocol
-# ## "netflow v9" -- Netflow v9 protocol (also works for IPFIX)
-# ## "sflow v5" -- sFlow v5 protocol
-# # protocol = "ipfix"
-#
-# ## Private Enterprise Numbers (PEN) mappings for decoding
-# ## This option allows to specify vendor-specific mapping files to use during
-# ## decoding.
-# # private_enterprise_number_files = []
-#
-# ## Log incoming packets for tracing issues
-# # log_level = "trace"
-
-
-# # Gather Netgear Switch Discovery Protocol status
-# [[inputs.nsdp]]
-# ## The target address to use for status gathering. Either Broadcast (default)
-# ## or the address of a single well-known device.
-# # address = "255.255.255.255:63322"
-#
-# ## The maximum number of device responses to wait for. 0 means no limit.
-# ## NSDP works asynchronously. Without a limit (0) the plugin always waits
-# ## the amount given in timeout for possible responses. By setting this
-# ## option to the known number of devices, the plugin completes
-# ## processing as soon as the last device has answered.
-# # device_limit = 0
-#
-# ## The maximum duration to wait for device responses.
-# # timeout = "2s"
-
-
-# # Read metrics from NSQD topic(s)
-# [[inputs.nsq_consumer]]
-# ## An array representing the NSQD TCP HTTP Endpoints
-# nsqd = ["localhost:4150"]
-#
-# ## An array representing the NSQLookupd HTTP Endpoints
-# nsqlookupd = ["localhost:4161"]
-# topic = "telegraf"
-# channel = "consumer"
-# max_in_flight = 100
-#
-# ## Max undelivered messages
-# ## This plugin uses tracking metrics, which ensure messages are read to
-# ## outputs before acknowledging them to the original broker to ensure data
-# ## is not lost. This option sets the maximum messages to read from the
-# ## broker that have not been written by an output.
-# ##
-# ## This value needs to be picked with awareness of the agent's
-# ## metric_batch_size value as well. Setting max undelivered messages too high
-# ## can result in a constant stream of data batches to the output. While
-# ## setting it too low may never flush the broker's messages.
-# # max_undelivered_messages = 1000
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-
-
-# # Pulls statistics from nvidia GPUs attached to the host
-# [[inputs.nvidia_smi]]
-# ## Optional: path to nvidia-smi binary, defaults "/usr/bin/nvidia-smi"
-# ## We will first try to locate the nvidia-smi binary with the explicitly specified value (or default value),
-# ## if it is not found, we will try to locate it on PATH(exec.LookPath), if it is still not found, an error will be returned
-# # bin_path = "/usr/bin/nvidia-smi"
-#
-# ## Optional: timeout for GPU polling
-# # timeout = "5s"
-
-
-# # Retrieve data from OPCUA devices
-# [[inputs.opcua_listener]]
-# ## Metric name
-# # name = "opcua_listener"
-# #
-# ## OPC UA Endpoint URL
-# # endpoint = "opc.tcp://localhost:4840"
-# #
-# ## Maximum time allowed to establish a connect to the endpoint.
-# # connect_timeout = "10s"
-# #
-# ## Behavior when we fail to connect to the endpoint on initialization. Valid options are:
-# ## "error": throw an error and exits Telegraf
-# ## "ignore": ignore this plugin if errors are encountered
-# # "retry": retry connecting at each interval
-# # connect_fail_behavior = "error"
-# #
-# ## Maximum time allowed for a request over the established connection.
-# # request_timeout = "5s"
-# #
-# # Maximum time that a session shall remain open without activity.
-# # session_timeout = "20m"
-# #
-# ## The interval at which the server should at least update its monitored items.
-# ## Please note that the OPC UA server might reject the specified interval if it cannot meet the required update rate.
-# ## Therefore, always refer to the hardware/software documentation of your server to ensure the specified interval is supported.
-# # subscription_interval = "100ms"
-# #
-# ## Security policy, one of "None", "Basic128Rsa15", "Basic256",
-# ## "Basic256Sha256", or "auto"
-# # security_policy = "auto"
-# #
-# ## Security mode, one of "None", "Sign", "SignAndEncrypt", or "auto"
-# # security_mode = "auto"
-# #
-# ## Path to cert.pem. Required when security mode or policy isn't "None".
-# ## If cert path is not supplied, self-signed cert and key will be generated.
-# # certificate = "/etc/telegraf/cert.pem"
-# #
-# ## Path to private key.pem. Required when security mode or policy isn't "None".
-# ## If key path is not supplied, self-signed cert and key will be generated.
-# # private_key = "/etc/telegraf/key.pem"
-# #
-# ## Authentication Method, one of "Certificate", "UserName", or "Anonymous". To
-# ## authenticate using a specific ID, select 'Certificate' or 'UserName'
-# # auth_method = "Anonymous"
-# #
-# ## Username. Required for auth_method = "UserName"
-# # username = ""
-# #
-# ## Password. Required for auth_method = "UserName"
-# # password = ""
-# #
-# ## Option to select the metric timestamp to use. Valid options are:
-# ## "gather" -- uses the time of receiving the data in telegraf
-# ## "server" -- uses the timestamp provided by the server
-# ## "source" -- uses the timestamp provided by the source
-# # timestamp = "gather"
-# #
-# ## The default timetsamp format is RFC3339Nano
-# # Other timestamp layouts can be configured using the Go language time
-# # layout specification from https://golang.org/pkg/time/#Time.Format
-# # e.g.: json_timestamp_format = "2006-01-02T15:04:05Z07:00"
-# #timestamp_format = ""
-# #
-# #
-# ## Client trace messages
-# ## When set to true, and debug mode enabled in the agent settings, the OPCUA
-# ## client's messages are included in telegraf logs. These messages are very
-# ## noisey, but essential for debugging issues.
-# # client_trace = false
-# #
-# ## Include additional Fields in each metric
-# ## Available options are:
-# ## DataType -- OPC-UA Data Type (string)
-# # optional_fields = []
-# #
-# ## Node ID configuration
-# ## name - field name to use in the output
-# ## namespace - OPC UA namespace of the node (integer value 0 thru 3)
-# ## identifier_type - OPC UA ID type (s=string, i=numeric, g=guid, b=opaque)
-# ## identifier - OPC UA ID (tag as shown in opcua browser)
-# ## default_tags - extra tags to be added to the output metric (optional)
-# ## monitoring_params - additional settings for the monitored node (optional)
-# ##
-# ## Monitoring parameters
-# ## sampling_interval - interval at which the server should check for data
-# ## changes (default: 0s)
-# ## queue_size - size of the notification queue (default: 10)
-# ## discard_oldest - how notifications should be handled in case of full
-# ## notification queues, possible values:
-# ## true: oldest value added to queue gets replaced with new
-# ## (default)
-# ## false: last value added to queue gets replaced with new
-# ## data_change_filter - defines the condition under which a notification should
-# ## be reported
-# ##
-# ## Data change filter
-# ## trigger - specify the conditions under which a data change notification
-# ## should be reported, possible values:
-# ## "Status": only report notifications if the status changes
-# ## (default if parameter is omitted)
-# ## "StatusValue": report notifications if either status or value
-# ## changes
-# ## "StatusValueTimestamp": report notifications if either status,
-# ## value or timestamp changes
-# ## deadband_type - type of the deadband filter to be applied, possible values:
-# ## "Absolute": absolute change in a data value to report a notification
-# ## "Percent": works only with nodes that have an EURange property set
-# ## and is defined as: send notification if
-# ## (last value - current value) >
-# ## (deadband_value/100.0) * ((high–low) of EURange)
-# ## deadband_value - value to deadband_type, must be a float value, no filter is set
-# ## for negative values
-# ##
-# ## Use either the inline notation or the bracketed notation, not both.
-# #
-# ## Inline notation (default_tags and monitoring_params not supported yet)
-# # nodes = [
-# # {name="node1", namespace="", identifier_type="", identifier=""},
-# # {name="node2", namespace="", identifier_type="", identifier=""}
-# # ]
-# #
-# ## Bracketed notation
-# # [[inputs.opcua_listener.nodes]]
-# # name = "node1"
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-# # default_tags = { tag1 = "value1", tag2 = "value2" }
-# #
-# # [[inputs.opcua_listener.nodes]]
-# # name = "node2"
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-# #
-# # [inputs.opcua_listener.nodes.monitoring_params]
-# # sampling_interval = "0s"
-# # queue_size = 10
-# # discard_oldest = true
-# #
-# # [inputs.opcua_listener.nodes.monitoring_params.data_change_filter]
-# # trigger = "Status"
-# # deadband_type = "Absolute"
-# # deadband_value = 0.0
-# #
-# ## Node Group
-# ## Sets defaults so they aren't required in every node.
-# ## Default values can be set for:
-# ## * Metric name
-# ## * OPC UA namespace
-# ## * Identifier
-# ## * Default tags
-# ## * Sampling interval
-# ##
-# ## Multiple node groups are allowed
-# #[[inputs.opcua_listener.group]]
-# ## Group Metric name. Overrides the top level name. If unset, the
-# ## top level name is used.
-# # name =
-# #
-# ## Group default namespace. If a node in the group doesn't set its
-# ## namespace, this is used.
-# # namespace =
-# #
-# ## Group default identifier type. If a node in the group doesn't set its
-# ## namespace, this is used.
-# # identifier_type =
-# #
-# ## Default tags that are applied to every node in this group. Can be
-# ## overwritten in a node by setting a different value for the tag name.
-# ## example: default_tags = { tag1 = "value1" }
-# # default_tags = {}
-# #
-# ## Group default sampling interval. If a node in the group doesn't set its
-# ## sampling interval, this is used.
-# # sampling_interval = "0s"
-# #
-# ## Node ID Configuration. Array of nodes with the same settings as above.
-# ## Use either the inline notation or the bracketed notation, not both.
-# #
-# ## Inline notation (default_tags and monitoring_params not supported yet)
-# # nodes = [
-# # {name="node1", namespace="", identifier_type="", identifier=""},
-# # {name="node2", namespace="", identifier_type="", identifier=""}
-# #]
-# #
-# ## Bracketed notation
-# # [[inputs.opcua_listener.group.nodes]]
-# # name = "node1"
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-# # default_tags = { tag1 = "override1", tag2 = "value2" }
-# #
-# # [[inputs.opcua_listener.group.nodes]]
-# # name = "node2"
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-# #
-# # [inputs.opcua_listener.group.nodes.monitoring_params]
-# # sampling_interval = "0s"
-# # queue_size = 10
-# # discard_oldest = true
-# #
-# # [inputs.opcua_listener.group.nodes.monitoring_params.data_change_filter]
-# # trigger = "Status"
-# # deadband_type = "Absolute"
-# # deadband_value = 0.0
-# #
-#
-# ## Multiple event groups are allowed.
-# # [[inputs.opcua_listener.events]]
-# # ## Polling interval for data collection
-# # # sampling_interval = "10s"
-# # ## Size of the notification queue
-# # # queue_size = 10
-# # ## Node parameter defaults for node definitions below
-# # # namespace = ""
-# # # identifier_type = ""
-# # ## Specifies OPCUA Event sources to filter on
-# # # source_names = ["SourceName1", "SourceName2"]
-# # ## Fields to capture from event notifications
-# # fields = ["Severity", "Message", "Time"]
-# #
-# # ## Type or level of events to capture from the monitored nodes.
-# # [inputs.opcua_listener.events.event_type_node]
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-# #
-# # ## Nodes to monitor for event notifications associated with the defined
-# # ## event type
-# # [[inputs.opcua_listener.events.node_ids]]
-# # namespace = ""
-# # identifier_type = ""
-# # identifier = ""
-#
-# ## Enable workarounds required by some devices to work correctly
-# # [inputs.opcua_listener.workarounds]
-# # ## Set additional valid status codes, StatusOK (0x0) is always considered valid
-# # # additional_valid_status_codes = ["0xC0"]
-# # ## Use unregistered reads instead of registered reads
-# # # use_unregistered_reads = false
-
-
-# # Collects performance metrics from OpenStack services
-# [[inputs.openstack]]
-# ## The recommended interval to poll is '30m'
-#
-# ## The identity endpoint to authenticate against and get the service catalog from.
-# authentication_endpoint = "https://my.openstack.cloud:5000"
-#
-# ## The domain to authenticate against when using a V3 identity endpoint.
-# # domain = "default"
-#
-# ## The project to authenticate as.
-# # project = "admin"
-#
-# ## User authentication credentials. Must have admin rights.
-# username = "admin"
-# password = "password"
-#
-# ## Available services are:
-# ## "agents", "aggregates", "cinder_services", "flavors", "hypervisors",
-# ## "networks", "nova_services", "ports", "projects", "servers",
-# ## "serverdiagnostics", "services", "stacks", "storage_pools", "subnets",
-# ## "volumes"
-# # enabled_services = ["services", "projects", "hypervisors", "flavors", "networks", "volumes"]
-#
-# ## Query all instances of all tenants for the volumes and server services
-# ## NOTE: Usually this is only permitted for administrators!
-# # query_all_tenants = true
-#
-# ## output secrets (such as adminPass(for server) and UserID(for volume)).
-# # output_secrets = false
-#
-# ## Amount of time allowed to complete the HTTP(s) request.
-# # timeout = "5s"
-#
-# ## HTTP Proxy support
-# # http_proxy_url = ""
-#
-# ## Optional TLS Config
-# # tls_ca = /path/to/cafile
-# # tls_cert = /path/to/certfile
-# # tls_key = /path/to/keyfile
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Options for tags received from Openstack
-# # tag_prefix = "openstack_tag_"
-# # tag_value = "true"
-#
-# ## Timestamp format for timestamp data received from Openstack.
-# ## If false format is unix nanoseconds.
-# # human_readable_timestamps = false
-#
-# ## Measure Openstack call duration
-# # measure_openstack_requests = false
-
-
-# # Receive OpenTelemetry traces, metrics, and logs over gRPC
-# [[inputs.opentelemetry]]
-# ## Override the default (0.0.0.0:4317) destination OpenTelemetry gRPC service
-# ## address:port
-# # service_address = "0.0.0.0:4317"
-#
-# ## Override the default (5s) new connection timeout
-# # timeout = "5s"
-#
-# ## gRPC Maximum Message Size
-# # max_msg_size = "4MB"
-#
-# ## Override the default span attributes to be used as line protocol tags.
-# ## These are always included as tags:
-# ## - trace ID
-# ## - span ID
-# ## Common attributes can be found here:
-# ## - https://github.com/open-telemetry/opentelemetry-collector/tree/main/semconv
-# # span_dimensions = ["service.name", "span.name"]
-#
-# ## Override the default log record attributes to be used as line protocol tags.
-# ## These are always included as tags, if available:
-# ## - trace ID
-# ## - span ID
-# ## Common attributes can be found here:
-# ## - https://github.com/open-telemetry/opentelemetry-collector/tree/main/semconv
-# ## When using InfluxDB for both logs and traces, be certain that log_record_dimensions
-# ## matches the span_dimensions value.
-# # log_record_dimensions = ["service.name"]
-#
-# ## Override the default profile attributes to be used as line protocol tags.
-# ## These are always included as tags, if available:
-# ## - profile_id
-# ## - address
-# ## - sample
-# ## - sample_name
-# ## - sample_unit
-# ## - sample_type
-# ## - sample_type_unit
-# ## Common attributes can be found here:
-# ## - https://github.com/open-telemetry/opentelemetry-collector/tree/main/semconv
-# # profile_dimensions = []
-#
-# ## Override the default (prometheus-v1) metrics schema.
-# ## Supports: "prometheus-v1", "prometheus-v2"
-# ## For more information about the alternatives, read the Prometheus input
-# ## plugin notes.
-# # metrics_schema = "prometheus-v1"
-#
-# ## Optional TLS Config.
-# ## For advanced options: https://github.com/influxdata/telegraf/blob/v1.18.3/docs/TLS.md
-# ##
-# ## Set one or more allowed client CA certificate file names to
-# ## enable mutually authenticated TLS connections.
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-# ## Add service certificate and key.
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-
-
-# # Read metrics from one or many pgbouncer servers
-# [[inputs.pgbouncer]]
-# ## specify address via a url matching:
-# ## postgres://[pqgotest[:password]]@host:port[/dbname]\
-# ## ?sslmode=[disable|verify-ca|verify-full]
-# ## or a simple string:
-# ## host=localhost port=5432 user=pqgotest password=... sslmode=... dbname=app_production
-# ##
-# ## All connection parameters are optional.
-# ##
-# address = "host=localhost user=pgbouncer sslmode=disable"
-#
-# ## Specify which "show" commands to gather metrics for.
-# ## Choose from: "stats", "pools", "lists", "databases"
-# # show_commands = ["stats", "pools"]
-
-
-# # Read metrics from one or many postgresql servers
-# [[inputs.postgresql]]
-# ## Specify address via a url matching:
-# ## postgres://[pqgotest[:password]]@localhost[/dbname]?sslmode=[disable|verify-ca|verify-full]&statement_timeout=...
-# ## or a simple string:
-# ## host=localhost user=pqgotest password=... sslmode=... dbname=app_production
-# ## Users can pass the path to the socket as the host value to use a socket
-# ## connection (e.g. `/var/run/postgresql`).
-# ##
-# ## All connection parameters are optional.
-# ##
-# ## Without the dbname parameter, the driver will default to a database
-# ## with the same name as the user. This dbname is just for instantiating a
-# ## connection with the server and doesn't restrict the databases we are trying
-# ## to grab metrics for.
-# ##
-# address = "host=localhost user=postgres sslmode=disable"
-#
-# ## A custom name for the database that will be used as the "server" tag in the
-# ## measurement output. If not specified, a default one generated from
-# ## the connection address is used.
-# # outputaddress = "db01"
-#
-# ## connection configuration.
-# ## maxlifetime - specify the maximum lifetime of a connection.
-# ## default is forever (0s)
-# ##
-# ## Note that this does not interrupt queries, the lifetime will not be enforced
-# ## whilst a query is running
-# # max_lifetime = "0s"
-#
-# ## A list of databases to explicitly ignore. If not specified, metrics for all
-# ## databases are gathered. Do NOT use with the 'databases' option.
-# # ignored_databases = ["postgres", "template0", "template1"]
-#
-# ## A list of databases to pull metrics about. If not specified, metrics for all
-# ## databases are gathered. Do NOT use with the 'ignored_databases' option.
-# # databases = ["app_production", "testing"]
-#
-# ## Whether to use prepared statements when connecting to the database.
-# ## This should be set to false when connecting through a PgBouncer instance
-# ## with pool_mode set to transaction.
-# prepared_statements = true
-
-
-# # Read metrics from one or many postgresql servers
-# [[inputs.postgresql_extensible]]
-# # specify address via a url matching:
-# # postgres://[pqgotest[:password]]@host:port[/dbname]?sslmode=...&statement_timeout=...
-# # or a simple string:
-# # host=localhost port=5432 user=pqgotest password=... sslmode=... dbname=app_production
-# #
-# # All connection parameters are optional.
-# # Without the dbname parameter, the driver will default to a database
-# # with the same name as the user. This dbname is just for instantiating a
-# # connection with the server and doesn't restrict the databases we are trying
-# # to grab metrics for.
-# #
-# address = "host=localhost user=postgres sslmode=disable"
-#
-# ## Whether to use prepared statements when connecting to the database.
-# ## This should be set to false when connecting through a PgBouncer instance
-# ## with pool_mode set to transaction.
-# prepared_statements = true
-#
-# # Define the toml config where the sql queries are stored
-# # The script option can be used to specify the .sql file path.
-# # If script and sqlquery options specified at same time, sqlquery will be used
-# #
-# # the measurement field defines measurement name for metrics produced
-# # by the query. Default is "postgresql".
-# #
-# # the tagvalue field is used to define custom tags (separated by comas).
-# # the query is expected to return columns which match the names of the
-# # defined tags. The values in these columns must be of a string-type,
-# # a number-type or a blob-type.
-# #
-# # The timestamp field is used to override the data points timestamp value. By
-# # default, all rows inserted with current time. By setting a timestamp column,
-# # the row will be inserted with that column's value.
-# #
-# # The min_version field specifies minimal database version this query
-# # will run on.
-# #
-# # The max_version field when set specifies maximal database version
-# # this query will NOT run on.
-# #
-# # Database version in `minversion` and `maxversion` is represented as
-# # a single integer without last component, for example:
-# # 9.6.2 -> 906
-# # 15.2 -> 1500
-# #
-# # Structure :
-# # [[inputs.postgresql_extensible.query]]
-# # measurement string
-# # sqlquery string
-# # min_version int
-# # max_version int
-# # withdbname boolean
-# # tagvalue string (coma separated)
-# # timestamp string
-# [[inputs.postgresql_extensible.query]]
-# measurement="pg_stat_database"
-# sqlquery="SELECT * FROM pg_stat_database WHERE datname"
-# min_version=901
-# tagvalue=""
-# [[inputs.postgresql_extensible.query]]
-# script="your_sql-filepath.sql"
-# min_version=901
-# max_version=1300
-# tagvalue=""
-
-
-# # Read metrics from one or many prometheus clients
-# [[inputs.prometheus]]
-# ## An array of urls to scrape metrics from.
-# urls = ["http://localhost:9100/metrics"]
-#
-# ## Metric version controls the mapping from Prometheus metrics into Telegraf metrics.
-# ## See "Metric Format Configuration" in plugins/inputs/prometheus/README.md for details.
-# ## Valid options: 1, 2
-# # metric_version = 1
-#
-# ## Url tag name (tag containing scrapped url. optional, default is "url")
-# # url_tag = "url"
-#
-# ## Whether the timestamp of the scraped metrics will be ignored.
-# ## If set to true, the gather time will be used.
-# # ignore_timestamp = false
-#
-# ## Override content-type of the returned message
-# ## Available options are for prometheus:
-# ## text, protobuf-delimiter, protobuf-compact, protobuf-text,
-# ## and for openmetrics:
-# ## openmetrics-text, openmetrics-protobuf
-# ## By default the content-type of the response is used.
-# # content_type_override = ""
-#
-# ## An array of Kubernetes services to scrape metrics from.
-# # kubernetes_services = ["http://my-service-dns.my-namespace:9100/metrics"]
-#
-# ## Kubernetes config file to create client from.
-# # kube_config = "/path/to/kubernetes.config"
-#
-# ## Scrape Pods
-# ## Enable scraping of k8s pods. Further settings as to which pods to scape
-# ## are determiend by the 'method' option below. When enabled, the default is
-# ## to use annotations to determine whether to scrape or not.
-# # monitor_kubernetes_pods = false
-#
-# ## Scrape Pods Method
-# ## annotations: default, looks for specific pod annotations documented below
-# ## settings: only look for pods matching the settings provided, not
-# ## annotations
-# ## settings+annotations: looks at pods that match annotations using the user
-# ## defined settings
-# # monitor_kubernetes_pods_method = "annotations"
-#
-# ## Scrape Pods 'annotations' method options
-# ## If set method is set to 'annotations' or 'settings+annotations', these
-# ## annotation flags are looked for:
-# ## - prometheus.io/scrape: Required to enable scraping for this pod. Can also
-# ## use 'prometheus.io/scrape=false' annotation to opt-out entirely.
-# ## - prometheus.io/scheme: If the metrics endpoint is secured then you will
-# ## need to set this to 'https' & most likely set the tls config
-# ## - prometheus.io/path: If the metrics path is not /metrics, define it with
-# ## this annotation
-# ## - prometheus.io/port: If port is not 9102 use this annotation
-#
-# ## Scrape Pods 'settings' method options
-# ## When using 'settings' or 'settings+annotations', the default values for
-# ## annotations can be modified using with the following options:
-# # monitor_kubernetes_pods_scheme = "http"
-# # monitor_kubernetes_pods_port = "9102"
-# # monitor_kubernetes_pods_path = "/metrics"
-#
-# ## Get the list of pods to scrape with either the scope of
-# ## - cluster: the kubernetes watch api (default, no need to specify)
-# ## - node: the local cadvisor api; for scalability. Note that the config node_ip or the environment variable NODE_IP must be set to the host IP.
-# # pod_scrape_scope = "cluster"
-#
-# ## Only for node scrape scope: node IP of the node that telegraf is running on.
-# ## Either this config or the environment variable NODE_IP must be set.
-# # node_ip = "10.180.1.1"
-#
-# ## Only for node scrape scope: interval in seconds for how often to get updated pod list for scraping.
-# ## Default is 60 seconds.
-# # pod_scrape_interval = 60
-#
-# ## Content length limit
-# ## When set, telegraf will drop responses with length larger than the configured value.
-# ## Default is "0KB" which means unlimited.
-# # content_length_limit = "0KB"
-#
-# ## Restricts Kubernetes monitoring to a single namespace
-# ## ex: monitor_kubernetes_pods_namespace = "default"
-# # monitor_kubernetes_pods_namespace = ""
-# ## The name of the label for the pod that is being scraped.
-# ## Default is 'namespace' but this can conflict with metrics that have the label 'namespace'
-# # pod_namespace_label_name = "namespace"
-# # label selector to target pods which have the label
-# # kubernetes_label_selector = "env=dev,app=nginx"
-# # field selector to target pods
-# # eg. To scrape pods on a specific node
-# # kubernetes_field_selector = "spec.nodeName=$HOSTNAME"
-#
-# ## Filter which pod annotations and labels will be added to metric tags
-# #
-# # pod_annotation_include = ["annotation-key-1"]
-# # pod_annotation_exclude = ["exclude-me"]
-# # pod_label_include = ["label-key-1"]
-# # pod_label_exclude = ["exclude-me"]
-#
-# # cache refresh interval to set the interval for re-sync of pods list.
-# # Default is 60 minutes.
-# # cache_refresh_interval = 60
-#
-# ## Use bearer token for authorization. ('bearer_token' takes priority)
-# # bearer_token = "/path/to/bearer/token"
-# ## OR
-# # bearer_token_string = "abc_123"
-#
-# ## HTTP Basic Authentication username and password. ('bearer_token' and
-# ## 'bearer_token_string' take priority)
-# # username = ""
-# # password = ""
-#
-# ## Optional custom HTTP headers
-# # http_headers = {"X-Special-Header" = "Special-Value"}
-#
-# ## Specify timeout duration for slower prometheus clients (default is 5s)
-# # timeout = "5s"
-#
-# ## This option is now used by the HTTP client to set the header response
-# ## timeout, not the overall HTTP timeout.
-# # response_timeout = "5s"
-#
-# ## HTTP Proxy support
-# # use_system_proxy = false
-# # http_proxy_url = ""
-#
-# ## Optional TLS Config
-# # tls_ca = /path/to/cafile
-# # tls_cert = /path/to/certfile
-# # tls_key = /path/to/keyfile
-#
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## Use the given name as the SNI server name on each URL
-# # tls_server_name = "myhost.example.org"
-#
-# ## TLS renegotiation method, choose from "never", "once", "freely"
-# # tls_renegotiation_method = "never"
-#
-# ## Enable/disable TLS
-# ## Set to true/false to enforce TLS being enabled/disabled. If not set,
-# ## enable TLS only if any of the other options are specified.
-# # tls_enable = true
-#
-# ## This option allows you to report the status of prometheus requests.
-# # enable_request_metrics = false
-#
-# ## Scrape Services available in Consul Catalog
-# # [inputs.prometheus.consul]
-# # enabled = true
-# # agent = "http://localhost:8500"
-# # query_interval = "5m"
-#
-# # [[inputs.prometheus.consul.query]]
-# # name = "a service name"
-# # tag = "a service tag"
-# # url = 'http://{{if ne .ServiceAddress ""}}{{.ServiceAddress}}{{else}}{{.Address}}{{end}}:{{.ServicePort}}/{{with .ServiceMeta.metrics_path}}{{.}}{{else}}metrics{{end}}'
-# # [inputs.prometheus.consul.query.tags]
-# # host = "{{.Node}}"
-#
-# ## Scrape Hosts available with http service discovery
-# # [inputs.prometheus.http_service_discovery]
-# # enabled = false
-# # url = "http://localhost:9000/service-discovery"
-# # query_interval = "5m"
-#
-# ## Control pod scraping based on pod namespace annotations
-# ## Pass and drop here act like tagpass and tagdrop, but instead
-# ## of filtering metrics they filters pod candidates for scraping
-# #[inputs.prometheus.namespace_annotation_pass]
-# # annotation_key = ["value1", "value2"]
-# #[inputs.prometheus.namespace_annotation_drop]
-# # some_annotation_key = ["dont-scrape"]
-
-
-# # RAS plugin exposes counter metrics for Machine Check Errors provided by RASDaemon (sqlite3 output is required).
-# # This plugin ONLY supports Linux on 386, amd64, arm, and arm64
-# [[inputs.ras]]
-# ## Optional path to RASDaemon sqlite3 database.
-# ## Default: /var/lib/rasdaemon/ras-mc_event.db
-# # db_path = ""
-
-
-# # Read metrics from one or many redis servers
-# [[inputs.redis]]
-# ## specify servers via a url matching:
-# ## [protocol://][username:password]@address[:port]
-# ## e.g.
-# ## tcp://localhost:6379
-# ## unix:///var/run/redis.sock
-# ##
-# ## If no servers are specified, then localhost is used as the host.
-# ## If no port is specified, 6379 is used
-# servers = ["tcp://localhost:6379"]
-#
-# ## Optional. Specify redis commands to retrieve values
-# # [[inputs.redis.commands]]
-# # # The command to run where each argument is a separate element
-# # command = ["get", "sample-key"]
-# # # The field to store the result in
-# # field = "sample-key-value"
-# # # The type of the result
-# # # Can be "string", "integer", or "float"
-# # type = "string"
-#
-# ## Specify username and password for ACL auth (Redis 6.0+). You can add this
-# ## to the server URI above or specify it here. The values here take
-# ## precedence.
-# # username = ""
-# # password = ""
-#
-# ## Optional TLS Config
-# ## Check tls/config.go ClientConfig for more options
-# # tls_enable = true
-# # tls_ca = "/etc/telegraf/ca.pem"
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Use TLS but skip chain & host verification
-# # insecure_skip_verify = true
-
-
-# # Riemann protobuff listener
-# [[inputs.riemann_listener]]
-# ## URL to listen on
-# ## Default is "tcp://:5555"
-# # service_address = "tcp://:8094"
-# # service_address = "tcp://127.0.0.1:http"
-# # service_address = "tcp4://:8094"
-# # service_address = "tcp6://:8094"
-# # service_address = "tcp6://[2001:db8::1]:8094"
-#
-# ## Maximum number of concurrent connections.
-# ## 0 (default) is unlimited.
-# # max_connections = 1024
-# ## Read timeout.
-# ## 0 (default) is unlimited.
-# # read_timeout = "30s"
-# ## Optional TLS configuration.
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Enables client authentication if set.
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-# ## Maximum socket buffer size (in bytes when no unit specified).
-# # read_buffer_size = "64KiB"
-# ## Period between keep alive probes.
-# ## 0 disables keep alive probes.
-# ## Defaults to the OS configuration.
-# # keep_alive_period = "5m"
-
-
-# # Plugin for retrieving data from Siemens PLCs via the S7 protocol (RFC1006)
-# [[inputs.s7comm]]
-# ## Parameters to contact the PLC (mandatory)
-# ## The server is in the <host>[:port] format where the port defaults to 102
-# ## if not explicitly specified.
-# server = "127.0.0.1:102"
-# rack = 0
-# slot = 0
-#
-# ## Connection or drive type of S7 protocol
-# ## Available options are "PD" (programming device), "OP" (operator panel) or "basic" (S7 basic communication).
-# # connection_type = "PD"
-#
-# ## Max count of fields to be bundled in one batch-request. (PDU size)
-# # pdu_size = 20
-#
-# ## Timeout for requests
-# # timeout = "10s"
-#
-# ## Log detailed connection messages for tracing issues
-# # log_level = "trace"
-#
-# ## Metric definition(s)
-# [[inputs.s7comm.metric]]
-# ## Name of the measurement
-# # name = "s7comm"
-#
-# ## Field definitions
-# ## name - field name
-# ## address - indirect address "<area>.<type><address>[.extra]"
-# ## area - e.g. be "DB1" for data-block one
-# ## type - supported types are (uppercase)
-# ## X -- bit, requires the bit-number as 'extra'
-# ## parameter
-# ## B -- byte (8 bit)
-# ## C -- character (8 bit)
-# ## W -- word (16 bit)
-# ## DW -- double word (32 bit)
-# ## I -- integer (16 bit)
-# ## DI -- double integer (32 bit)
-# ## LI -- long integer (64 bit) only S7-1200 S7-1500 suported
-# ## R -- IEEE 754 real floating point number (32 bit)
-# ## LR -- IEEE 754 long real floating point number (64 bit) only S7-1200 S7-1500 suported
-# ## DT -- date-time, always converted to unix timestamp
-# ## with nano-second precision
-# ## S -- string, requires the maximum length of the
-# ## string as 'extra' parameter
-# ## address - start address to read if not specified otherwise
-# ## in the type field
-# ## extra - extra parameter e.g. for the bit and string type
-# fields = [
-# { name="rpm", address="DB1.R4" },
-# { name="status_ok", address="DB1.X2.1" },
-# { name="last_error", address="DB2.S1.32" },
-# { name="last_error_time", address="DB2.DT2" },
-# { name="long_counter", address="DB3.LR12" }
-# ]
-#
-# ## Tags assigned to the metric
-# # [inputs.s7comm.metric.tags]
-# # device = "compressor"
-# # location = "main building"
-
-
-# ## DEPRECATED: The "sflow" plugin is deprecated in version 1.31.0 and will be removed in 1.40.0, use 'inputs.netflow' instead.
-# # SFlow V5 Protocol Listener
-# [[inputs.sflow]]
-# ## Address to listen for sFlow packets.
-# ## example: service_address = "udp://:6343"
-# ## service_address = "udp4://:6343"
-# ## service_address = "udp6://:6343"
-# service_address = "udp://:6343"
-#
-# ## Set the size of the operating system's receive buffer.
-# ## example: read_buffer_size = "64KiB"
-# # read_buffer_size = ""
-
-
-# # Receive SNMP traps
-# [[inputs.snmp_trap]]
-# ## Transport, local address, and port to listen on. Transport must
-# ## be "udp://". Omit local address to listen on all interfaces.
-# ## example: "udp://127.0.0.1:1234"
-# ##
-# ## Special permissions may be required to listen on a port less than
-# ## 1024. See README.md for details
-# ##
-# # service_address = "udp://:162"
-# ##
-# ## Path to mib files
-# ## Used by the gosmi translator.
-# ## To add paths when translating with netsnmp, use the MIBDIRS environment variable
-# # path = ["/usr/share/snmp/mibs"]
-# ##
-# ## Timeout running snmptranslate command
-# ## Used by the netsnmp translator only
-# # timeout = "5s"
-# ## Snmp version; one of "1", "2c" or "3".
-# # version = "2c"
-# ## SNMPv3 authentication and encryption options.
-# ##
-# ## Security Name.
-# # sec_name = "myuser"
-# ## Authentication protocol; one of "MD5", "SHA", "SHA224", "SHA256", "SHA384", "SHA512" or "".
-# # auth_protocol = "MD5"
-# ## Authentication password.
-# # auth_password = "pass"
-# ## Security Level; one of "noAuthNoPriv", "authNoPriv", or "authPriv".
-# # sec_level = "authNoPriv"
-# ## Privacy protocol used for encrypted messages; one of "DES", "AES", "AES192", "AES192C", "AES256", "AES256C" or "".
-# # priv_protocol = ""
-# ## Privacy password used for encrypted messages.
-# # priv_password = ""
-
-
-# # Generic socket listener capable of handling multiple socket types.
-# [[inputs.socket_listener]]
-# ## URL to listen on
-# # service_address = "tcp://:8094"
-# # service_address = "tcp://127.0.0.1:http"
-# # service_address = "tcp4://:8094"
-# # service_address = "tcp6://:8094"
-# # service_address = "tcp6://[2001:db8::1]:8094"
-# # service_address = "udp://:8094"
-# # service_address = "udp4://:8094"
-# # service_address = "udp6://:8094"
-# # service_address = "unix:///tmp/telegraf.sock"
-# # service_address = "unixgram:///tmp/telegraf.sock"
-# # service_address = "vsock://cid:port"
-#
-# ## Permission for unix sockets (only available on unix sockets)
-# ## This setting may not be respected by some platforms. To safely restrict
-# ## permissions it is recommended to place the socket into a previously
-# ## created directory with the desired permissions.
-# ## ex: socket_mode = "777"
-# # socket_mode = ""
-#
-# ## Maximum number of concurrent connections (only available on stream sockets like TCP)
-# ## Zero means unlimited.
-# # max_connections = 0
-#
-# ## Read timeout (only available on stream sockets like TCP)
-# ## Zero means unlimited.
-# # read_timeout = "0s"
-#
-# ## Optional TLS configuration (only available on stream sockets like TCP)
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Enables client authentication if set.
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Maximum socket buffer size (in bytes when no unit specified)
-# ## For stream sockets, once the buffer fills up, the sender will start
-# ## backing up. For datagram sockets, once the buffer fills up, metrics will
-# ## start dropping. Defaults to the OS default.
-# # read_buffer_size = "64KiB"
-#
-# ## Period between keep alive probes (only applies to TCP sockets)
-# ## Zero disables keep alive probes. Defaults to the OS configuration.
-# # keep_alive_period = "5m"
-#
-# ## Content encoding for message payloads
-# ## Can be set to "gzip" for compressed payloads or "identity" for no encoding.
-# # content_encoding = "identity"
-#
-# ## Maximum size of decoded packet (in bytes when no unit specified)
-# # max_decompression_size = "500MB"
-#
-# ## Message splitting strategy and corresponding settings for stream sockets
-# ## (tcp, tcp4, tcp6, unix or unixpacket). The setting is ignored for packet
-# ## listeners such as udp.
-# ## Available strategies are:
-# ## newline -- split at newlines (default)
-# ## null -- split at null bytes
-# ## delimiter -- split at delimiter byte-sequence in hex-format
-# ## given in `splitting_delimiter`
-# ## fixed length -- split after number of bytes given in `splitting_length`
-# ## variable length -- split depending on length information received in the
-# ## data. The length field information is specified in
-# ## `splitting_length_field`.
-# # splitting_strategy = "newline"
-#
-# ## Delimiter used to split received data to messages consumed by the parser.
-# ## The delimiter is a hex byte-sequence marking the end of a message
-# ## e.g. "0x0D0A", "x0d0a" or "0d0a" marks a Windows line-break (CR LF).
-# ## The value is case-insensitive and can be specified with "0x" or "x" prefix
-# ## or without.
-# ## Note: This setting is only used for splitting_strategy = "delimiter".
-# # splitting_delimiter = ""
-#
-# ## Fixed length of a message in bytes.
-# ## Note: This setting is only used for splitting_strategy = "fixed length".
-# # splitting_length = 0
-#
-# ## Specification of the length field contained in the data to split messages
-# ## with variable length. The specification contains the following fields:
-# ## offset -- start of length field in bytes from begin of data
-# ## bytes -- length of length field in bytes
-# ## endianness -- endianness of the value, either "be" for big endian or
-# ## "le" for little endian
-# ## header_length -- total length of header to be skipped when passing
-# ## data on to the parser. If zero (default), the header
-# ## is passed on to the parser together with the message.
-# ## Note: This setting is only used for splitting_strategy = "variable length".
-# # splitting_length_field = {offset = 0, bytes = 0, endianness = "be", header_length = 0}
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# # data_format = "influx"
-
-
-# # Read stats from one or more Solr servers or cores
-# [[inputs.solr]]
-# ## specify a list of one or more Solr servers
-# servers = ["http://localhost:8983"]
-#
-# ## specify a list of one or more Solr cores (default - all)
-# # cores = ["*"]
-#
-# ## Optional HTTP Basic Auth Credentials
-# # username = "username"
-# # password = "pa$$word"
-#
-# ## Timeout for HTTP requests
-# # timeout = "5s"
-
-
-# # Read metrics from SQL queries
-# [[inputs.sql]]
-# ## Database Driver
-# ## See https://github.com/influxdata/telegraf/blob/master/docs/SQL_DRIVERS_INPUT.md for
-# ## a list of supported drivers.
-# driver = "mysql"
-#
-# ## Data source name for connecting
-# ## The syntax and supported options depends on selected driver.
-# dsn = "username:password@tcp(mysqlserver:3307)/dbname?param=value"
-#
-# ## Timeout for any operation
-# ## Note that the timeout for queries is per query not per gather.
-# # timeout = "5s"
-#
-# ## Connection time limits
-# ## By default the maximum idle time and maximum lifetime of a connection is unlimited, i.e. the connections
-# ## will not be closed automatically. If you specify a positive time, the connections will be closed after
-# ## idleing or existing for at least that amount of time, respectively.
-# # connection_max_idle_time = "0s"
-# # connection_max_life_time = "0s"
-#
-# ## Connection count limits
-# ## By default the number of open connections is not limited and the number of maximum idle connections
-# ## will be inferred from the number of queries specified. If you specify a positive number for any of the
-# ## two options, connections will be closed when reaching the specified limit. The number of idle connections
-# ## will be clipped to the maximum number of connections limit if any.
-# # connection_max_open = 0
-# # connection_max_idle = auto
-#
-# ## Specifies plugin behavior regarding disconnected servers
-# ## Available choices :
-# ## - error: telegraf will return an error on startup if one the servers is unreachable
-# ## - ignore: telegraf will ignore unreachable servers on both startup and gather
-# # disconnected_servers_behavior = "error"
-#
-# [[inputs.sql.query]]
-# ## Query to perform on the server
-# query="SELECT user,state,latency,score FROM Scoreboard WHERE application > 0"
-# ## Alternatively to specifying the query directly you can select a file here containing the SQL query.
-# ## Only one of 'query' and 'query_script' can be specified!
-# # query_script = "/path/to/sql/script.sql"
-#
-# ## Name of the measurement
-# ## In case both measurement and 'measurement_col' are given, the latter takes precedence.
-# # measurement = "sql"
-#
-# ## Column name containing the name of the measurement
-# ## If given, this will take precedence over the 'measurement' setting. In case a query result
-# ## does not contain the specified column, we fall-back to the 'measurement' setting.
-# # measurement_column = ""
-#
-# ## Column name containing the time of the measurement
-# ## If omitted, the time of the query will be used.
-# # time_column = ""
-#
-# ## Format of the time contained in 'time_col'
-# ## The time must be 'unix', 'unix_ms', 'unix_us', 'unix_ns', or a golang time format.
-# ## See https://golang.org/pkg/time/#Time.Format for details.
-# # time_format = "unix"
-#
-# ## Column names containing tags
-# ## An empty include list will reject all columns and an empty exclude list will not exclude any column.
-# ## I.e. by default no columns will be returned as tag and the tags are empty.
-# # tag_columns_include = []
-# # tag_columns_exclude = []
-#
-# ## Column names containing fields (explicit types)
-# ## Convert the given columns to the corresponding type. Explicit type conversions take precedence over
-# ## the automatic (driver-based) conversion below.
-# ## NOTE: Columns should not be specified for multiple types or the resulting type is undefined.
-# # field_columns_float = []
-# # field_columns_int = []
-# # field_columns_uint = []
-# # field_columns_bool = []
-# # field_columns_string = []
-#
-# ## Column names containing fields (automatic types)
-# ## An empty include list is equivalent to '[*]' and all returned columns will be accepted. An empty
-# ## exclude list will not exclude any column. I.e. by default all columns will be returned as fields.
-# ## NOTE: We rely on the database driver to perform automatic datatype conversion.
-# # field_columns_include = []
-# # field_columns_exclude = []
-
-
-# # Read metrics from Microsoft SQL Server
-# [[inputs.sqlserver]]
-# ## Specify instances to monitor with a list of connection strings.
-# ## All connection parameters are optional.
-# ## By default, the host is localhost, listening on default port, TCP 1433.
-# ## for Windows, the user is the currently running AD user (SSO).
-# ## See https://github.com/microsoft/go-mssqldb for detailed connection
-# ## parameters, in particular, tls connections can be created like so:
-# ## "encrypt=true;certificate=<cert>;hostNameInCertificate=<SqlServer host fqdn>"
-# servers = [
-# "Server=192.168.1.10;Port=1433;User Id=<user>;Password=<pw>;app name=telegraf;log=1;",
-# ]
-#
-# ## Timeout for query execution operation
-# ## Note that the timeout for queries is per query not per gather.
-# ## 0 value means no timeout
-# # query_timeout = "0s"
-#
-# ## Authentication method
-# ## valid methods: "connection_string", "AAD"
-# # auth_method = "connection_string"
-#
-# ## ClientID is the is the client ID of the user assigned identity of the VM
-# ## that should be used to authenticate to the Azure SQL server.
-# # client_id = ""
-#
-# ## "database_type" enables a specific set of queries depending on the database type. If specified, it replaces azuredb = true/false and query_version = 2
-# ## In the config file, the sql server plugin section should be repeated each with a set of servers for a specific database_type.
-# ## Possible values for database_type are - "SQLServer" or "AzureSQLDB" or "AzureSQLManagedInstance" or "AzureSQLPool"
-# database_type = "SQLServer"
-#
-# ## A list of queries to include. If not specified, all the below listed queries are used.
-# include_query = []
-#
-# ## A list of queries to explicitly ignore.
-# exclude_query = ["SQLServerAvailabilityReplicaStates", "SQLServerDatabaseReplicaStates"]
-#
-# ## Force using the deprecated ADAL authentication method instead of the recommended
-# ## MSAL method. Setting this option is not recommended and only exists for backward
-# ## compatibility.
-# # use_deprecated_adal_authentication = false
-#
-# ## Queries enabled by default for database_type = "SQLServer" are -
-# ## SQLServerPerformanceCounters, SQLServerWaitStatsCategorized, SQLServerDatabaseIO, SQLServerProperties, SQLServerMemoryClerks,
-# ## SQLServerSchedulers, SQLServerRequests, SQLServerVolumeSpace, SQLServerCpu, SQLServerAvailabilityReplicaStates, SQLServerDatabaseReplicaStates,
-# ## SQLServerRecentBackups
-#
-# ## Queries enabled by default for database_type = "AzureSQLDB" are -
-# ## AzureSQLDBResourceStats, AzureSQLDBResourceGovernance, AzureSQLDBWaitStats, AzureSQLDBDatabaseIO, AzureSQLDBServerProperties,
-# ## AzureSQLDBOsWaitstats, AzureSQLDBMemoryClerks, AzureSQLDBPerformanceCounters, AzureSQLDBRequests, AzureSQLDBSchedulers
-#
-# ## Queries enabled by default for database_type = "AzureSQLManagedInstance" are -
-# ## AzureSQLMIResourceStats, AzureSQLMIResourceGovernance, AzureSQLMIDatabaseIO, AzureSQLMIServerProperties, AzureSQLMIOsWaitstats,
-# ## AzureSQLMIMemoryClerks, AzureSQLMIPerformanceCounters, AzureSQLMIRequests, AzureSQLMISchedulers
-#
-# ## Queries enabled by default for database_type = "AzureSQLPool" are -
-# ## AzureSQLPoolResourceStats, AzureSQLPoolResourceGovernance, AzureSQLPoolDatabaseIO, AzureSQLPoolWaitStats,
-# ## AzureSQLPoolMemoryClerks, AzureSQLPoolPerformanceCounters, AzureSQLPoolSchedulers
-#
-# ## Queries enabled by default for database_type = "AzureArcSQLManagedInstance" are -
-# ## AzureSQLMIDatabaseIO, AzureSQLMIServerProperties, AzureSQLMIOsWaitstats,
-# ## AzureSQLMIMemoryClerks, AzureSQLMIPerformanceCounters, AzureSQLMIRequests, AzureSQLMISchedulers
-#
-# ## Following are old config settings
-# ## You may use them only if you are using the earlier flavor of queries, however it is recommended to use
-# ## the new mechanism of identifying the database_type there by use it's corresponding queries
-#
-# ## Optional parameter, setting this to 2 will use a new version
-# ## of the collection queries that break compatibility with the original
-# ## dashboards.
-# ## Version 2 - is compatible from SQL Server 2012 and later versions and also for SQL Azure DB
-# # query_version = 2
-#
-# ## If you are using AzureDB, setting this to true will gather resource utilization metrics
-# # azuredb = false
-#
-# ## Toggling this to true will emit an additional metric called "sqlserver_telegraf_health".
-# ## This metric tracks the count of attempted queries and successful queries for each SQL instance specified in "servers".
-# ## The purpose of this metric is to assist with identifying and diagnosing any connectivity or query issues.
-# ## This setting/metric is optional and is disabled by default.
-# # health_metric = false
-#
-# ## Possible queries across different versions of the collectors
-# ## Queries enabled by default for specific Database Type
-#
-# ## database_type = AzureSQLDB by default collects the following queries
-# ## - AzureSQLDBWaitStats
-# ## - AzureSQLDBResourceStats
-# ## - AzureSQLDBResourceGovernance
-# ## - AzureSQLDBDatabaseIO
-# ## - AzureSQLDBServerProperties
-# ## - AzureSQLDBOsWaitstats
-# ## - AzureSQLDBMemoryClerks
-# ## - AzureSQLDBPerformanceCounters
-# ## - AzureSQLDBRequests
-# ## - AzureSQLDBSchedulers
-#
-# ## database_type = AzureSQLManagedInstance by default collects the following queries
-# ## - AzureSQLMIResourceStats
-# ## - AzureSQLMIResourceGovernance
-# ## - AzureSQLMIDatabaseIO
-# ## - AzureSQLMIServerProperties
-# ## - AzureSQLMIOsWaitstats
-# ## - AzureSQLMIMemoryClerks
-# ## - AzureSQLMIPerformanceCounters
-# ## - AzureSQLMIRequests
-# ## - AzureSQLMISchedulers
-#
-# ## database_type = AzureSQLPool by default collects the following queries
-# ## - AzureSQLPoolResourceStats
-# ## - AzureSQLPoolResourceGovernance
-# ## - AzureSQLPoolDatabaseIO
-# ## - AzureSQLPoolOsWaitStats,
-# ## - AzureSQLPoolMemoryClerks
-# ## - AzureSQLPoolPerformanceCounters
-# ## - AzureSQLPoolSchedulers
-#
-# ## database_type = SQLServer by default collects the following queries
-# ## - SQLServerPerformanceCounters
-# ## - SQLServerWaitStatsCategorized
-# ## - SQLServerDatabaseIO
-# ## - SQLServerProperties
-# ## - SQLServerMemoryClerks
-# ## - SQLServerSchedulers
-# ## - SQLServerRequests
-# ## - SQLServerVolumeSpace
-# ## - SQLServerCpu
-# ## - SQLServerRecentBackups
-# ## and following as optional (if mentioned in the include_query list)
-# ## - SQLServerAvailabilityReplicaStates
-# ## - SQLServerDatabaseReplicaStates
-
-
-# # Statsd Server
-# [[inputs.statsd]]
-# ## Protocol, must be "tcp", "udp4", "udp6" or "udp" (default=udp)
-# protocol = "udp"
-#
-# ## MaxTCPConnection - applicable when protocol is set to tcp (default=250)
-# max_tcp_connections = 250
-#
-# ## Enable TCP keep alive probes (default=false)
-# tcp_keep_alive = false
-#
-# ## Specifies the keep-alive period for an active network connection.
-# ## Only applies to TCP sockets and will be ignored if tcp_keep_alive is false.
-# ## Defaults to the OS configuration.
-# # tcp_keep_alive_period = "2h"
-#
-# ## Address and port to host UDP listener on
-# service_address = ":8125"
-#
-# ## The following configuration options control when telegraf clears it's cache
-# ## of previous values. If set to false, then telegraf will only clear it's
-# ## cache when the daemon is restarted.
-# ## Reset gauges every interval (default=true)
-# delete_gauges = true
-# ## Reset counters every interval (default=true)
-# delete_counters = true
-# ## Reset sets every interval (default=true)
-# delete_sets = true
-# ## Reset timings & histograms every interval (default=true)
-# delete_timings = true
-#
-# ## Enable aggregation temporality adds temporality=delta or temporality=commulative tag, and
-# ## start_time field, which adds the start time of the metric accumulation.
-# ## You should use this when using OpenTelemetry output.
-# # enable_aggregation_temporality = false
-#
-# ## Percentiles to calculate for timing & histogram stats.
-# percentiles = [50.0, 90.0, 99.0, 99.9, 99.95, 100.0]
-#
-# ## separator to use between elements of a statsd metric
-# metric_separator = "_"
-#
-# ## Parses extensions to statsd in the datadog statsd format
-# ## currently supports metrics and datadog tags.
-# ## http://docs.datadoghq.com/guides/dogstatsd/
-# datadog_extensions = false
-#
-# ## Parses distributions metric as specified in the datadog statsd format
-# ## https://docs.datadoghq.com/developers/metrics/types/?tab=distribution#definition
-# datadog_distributions = false
-#
-# ## Keep or drop the container id as tag. Included as optional field
-# ## in DogStatsD protocol v1.2 if source is running in Kubernetes
-# ## https://docs.datadoghq.com/developers/dogstatsd/datagram_shell/?tab=metrics#dogstatsd-protocol-v12
-# datadog_keep_container_tag = false
-#
-# ## Statsd data translation templates, more info can be read here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/TEMPLATE_PATTERN.md
-# # templates = [
-# # "cpu.* measurement*"
-# # ]
-#
-# ## Number of UDP messages allowed to queue up, once filled,
-# ## the statsd server will start dropping packets
-# allowed_pending_messages = 10000
-#
-# ## Number of worker threads used to parse the incoming messages.
-# # number_workers_threads = 5
-#
-# ## Number of timing/histogram values to track per-measurement in the
-# ## calculation of percentiles. Raising this limit increases the accuracy
-# ## of percentiles but also increases the memory usage and cpu time.
-# percentile_limit = 1000
-#
-# ## Maximum socket buffer size in bytes, once the buffer fills up, metrics
-# ## will start dropping. Defaults to the OS default.
-# # read_buffer_size = 65535
-#
-# ## Max duration (TTL) for each metric to stay cached/reported without being updated.
-# # max_ttl = "10h"
-#
-# ## Sanitize name method
-# ## By default, telegraf will pass names directly as they are received.
-# ## However, upstream statsd now does sanitization of names which can be
-# ## enabled by using the "upstream" method option. This option will a) replace
-# ## white space with '_', replace '/' with '-', and remove characters not
-# ## matching 'a-zA-Z_\-0-9\.;='.
-# #sanitize_name_method = ""
-#
-# ## Replace dots (.) with underscore (_) and dashes (-) with
-# ## double underscore (__) in metric names.
-# # convert_names = false
-#
-# ## Convert all numeric counters to float
-# ## Enabling this would ensure that both counters and guages are both emitted
-# ## as floats.
-# # float_counters = false
-#
-# ## Emit timings `metric_<name>_count` field as float, the same as all other
-# ## histogram fields
-# # float_timings = false
-#
-# ## Emit sets as float
-# # float_sets = false
-
-
-# # Suricata stats and alerts plugin
-# [[inputs.suricata]]
-# ## Source
-# ## Data sink for Suricata stats log. This is expected to be a filename of a
-# ## unix socket to be created for listening.
-# # source = "/var/run/suricata-stats.sock"
-#
-# ## Delimiter
-# ## Used for flattening field keys, e.g. subitem "alert" of "detect" becomes
-# ## "detect_alert" when delimiter is "_".
-# # delimiter = "_"
-#
-# ## Metric version
-# ## Version 1 only collects stats and optionally will look for alerts if
-# ## the configuration setting alerts is set to true.
-# ## Version 2 parses any event type message by default and produced metrics
-# ## under a single metric name using a tag to differentiate between event
-# ## types. The timestamp for the message is applied to the generated metric.
-# ## Additional tags and fields are included as well.
-# # version = "1"
-#
-# ## Alerts
-# ## In metric version 1, only status is captured by default, alerts must be
-# ## turned on with this configuration option. This option does not apply for
-# ## metric version 2.
-# # alerts = false
-
-
-# [[inputs.syslog]]
-# ## Protocol, address and port to host the syslog receiver.
-# ## If no host is specified, then localhost is used.
-# ## If no port is specified, 6514 is used (RFC5425#section-4.1).
-# ## ex: server = "tcp://localhost:6514"
-# ## server = "udp://:6514"
-# ## server = "unix:///var/run/telegraf-syslog.sock"
-# ## When using tcp, consider using 'tcp4' or 'tcp6' to force the usage of IPv4
-# ## or IPV6 respectively. There are cases, where when not specified, a system
-# ## may force an IPv4 mapped IPv6 address.
-# server = "tcp://127.0.0.1:6514"
-#
-# ## Permission for unix sockets (only available on unix sockets)
-# ## This setting may not be respected by some platforms. To safely restrict
-# ## permissions it is recommended to place the socket into a previously
-# ## created directory with the desired permissions.
-# ## ex: socket_mode = "777"
-# # socket_mode = ""
-#
-# ## Maximum number of concurrent connections (only available on stream sockets like TCP)
-# ## Zero means unlimited.
-# # max_connections = 0
-#
-# ## Read timeout (only available on stream sockets like TCP)
-# ## Zero means unlimited.
-# # read_timeout = "0s"
-#
-# ## Optional TLS configuration (only available on stream sockets like TCP)
-# # tls_cert = "/etc/telegraf/cert.pem"
-# # tls_key = "/etc/telegraf/key.pem"
-# ## Enables client authentication if set.
-# # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
-#
-# ## Maximum socket buffer size (in bytes when no unit specified)
-# ## For stream sockets, once the buffer fills up, the sender will start
-# ## backing up. For datagram sockets, once the buffer fills up, metrics will
-# ## start dropping. Defaults to the OS default.
-# # read_buffer_size = "64KiB"
-#
-# ## Period between keep alive probes (only applies to TCP sockets)
-# ## Zero disables keep alive probes. Defaults to the OS configuration.
-# # keep_alive_period = "5m"
-#
-# ## Content encoding for message payloads
-# ## Can be set to "gzip" for compressed payloads or "identity" for no encoding.
-# # content_encoding = "identity"
-#
-# ## Maximum size of decoded packet (in bytes when no unit specified)
-# # max_decompression_size = "500MB"
-#
-# ## Framing technique used for messages transport
-# ## Available settings are:
-# ## octet-counting -- see RFC5425#section-4.3.1 and RFC6587#section-3.4.1
-# ## non-transparent -- see RFC6587#section-3.4.2
-# # framing = "octet-counting"
-#
-# ## The trailer to be expected in case of non-transparent framing (default = "LF").
-# ## Must be one of "LF", or "NUL".
-# # trailer = "LF"
-#
-# ## Whether to parse in best effort mode or not (default = false).
-# ## By default best effort parsing is off.
-# # best_effort = false
-#
-# ## The RFC standard to use for message parsing
-# ## By default RFC5424 is used. RFC3164 only supports UDP transport (no streaming support)
-# ## Must be one of "RFC5424", or "RFC3164".
-# # syslog_standard = "RFC5424"
-#
-# ## Character to prepend to SD-PARAMs (default = "_").
-# ## A syslog message can contain multiple parameters and multiple identifiers within structured data section.
-# ## Eg., [id1 name1="val1" name2="val2"][id2 name1="val1" nameA="valA"]
-# ## For each combination a field is created.
-# ## Its name is created concatenating identifier, sdparam_separator, and parameter name.
-# # sdparam_separator = "_"
-#
-# ## Maximum length allowed for a single message (in bytes when no unit specified)
-# ## Only applies to octet-counting framing.
-# # max_message_length = "8KiB"
-
-
-# # Gather information about systemd-unit states
-# # This plugin ONLY supports Linux
-# [[inputs.systemd_units]]
-# ## Pattern of units to collect
-# ## A space-separated list of unit-patterns including wildcards determining
-# ## the units to collect.
-# ## ex: pattern = "telegraf* influxdb* user@*"
-# # pattern = "*"
-#
-# ## Filter for a specific unit type
-# ## Available settings are: service, socket, target, device, mount,
-# ## automount, swap, timer, path, slice and scope
-# # unittype = "service"
-#
-# ## Collect system or user scoped units
-# ## ex: scope = "user"
-# # scope = "system"
-#
-# ## Collect also units not loaded by systemd, i.e. disabled or static units
-# ## Enabling this feature might introduce significant load when used with
-# ## unspecific patterns (such as '*') as systemd will need to load all
-# ## matching unit files.
-# # collect_disabled_units = false
-#
-# ## Collect detailed information for the units
-# # details = false
-#
-# ## Timeout for state-collection
-# # timeout = "5s"
-
-
-# # Parse the new lines appended to a file
-# [[inputs.tail]]
-# ## File names or a pattern to tail.
-# ## These accept standard unix glob matching rules, but with the addition of
-# ## ** as a "super asterisk". ie:
-# ## "/var/log/**.log" -> recursively find all .log files in /var/log
-# ## "/var/log/*/*.log" -> find all .log files with a parent dir in /var/log
-# ## "/var/log/apache.log" -> just tail the apache log file
-# ## "/var/log/log[!1-2]* -> tail files without 1-2
-# ## "/var/log/log[^1-2]* -> identical behavior as above
-# ## See https://github.com/gobwas/glob for more examples
-# ##
-# files = ["/var/mymetrics.out"]
-#
-# ## Offset to start reading at
-# ## The following methods are available:
-# ## beginning -- start reading from the beginning of the file ignoring any persisted offset
-# ## end -- start reading from the end of the file ignoring any persisted offset
-# ## saved-or-beginning -- use the persisted offset of the file or, if no offset persisted, start from the beginning of the file
-# ## saved-or-end -- use the persisted offset of the file or, if no offset persisted, start from the end of the file
-# # initial_read_offset = "saved-or-end"
-#
-# ## Whether file is a named pipe
-# # pipe = false
-#
-# ## Method used to watch for file updates. Can be either "inotify" or "poll".
-# ## inotify is supported on linux, *bsd, and macOS, while Windows requires
-# ## using poll. Poll checks for changes every 250ms.
-# # watch_method = "inotify"
-#
-# ## Maximum lines of the file to process that have not yet be written by the
-# ## output. For best throughput set based on the number of metrics on each
-# ## line and the size of the output's metric_batch_size.
-# # max_undelivered_lines = 1000
-#
-# ## Character encoding to use when interpreting the file contents. Invalid
-# ## characters are replaced using the unicode replacement character. When set
-# ## to the empty string the data is not decoded to text.
-# ## ex: character_encoding = "utf-8"
-# ## character_encoding = "utf-16le"
-# ## character_encoding = "utf-16be"
-# ## character_encoding = ""
-# # character_encoding = ""
-#
-# ## Data format to consume.
-# ## Each data format has its own unique set of configuration options, read
-# ## more about them here:
-# ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
-# data_format = "influx"
-#
-# ## Set the tag that will contain the path of the tailed file. If you don't want this tag, set it to an empty string.
-# # path_tag = "path"
-#
-# ## Filters to apply to files before generating metrics
-# ## "ansi_color" removes ANSI colors
-# # filters = []
-#
-# ## multiline parser/codec
-# ## https://www.elastic.co/guide/en/logstash/2.4/plugins-filters-multiline.html
-# #[inputs.tail.multiline]
-# ## The pattern should be a regexp which matches what you believe to be an indicator that the field is part of an event consisting of multiple lines of log data.
-# #pattern = "^\s"
-#
-# ## The field's value must be previous or next and indicates the relation to the
-# ## multi-line event.
-# #match_which_line = "previous"
-#
-# ## The invert_match can be true or false (defaults to false).
-# ## If true, a message not matching the pattern will constitute a match of the multiline filter and the what will be applied. (vice-versa is also true)
-# #invert_match = false
-#
-# ## The handling method for quoted text (defaults to 'ignore').
-# ## The following methods are available:
-# ## ignore -- do not consider quotation (default)
-# ## single-quotes -- consider text quoted by single quotes (')
-# ## double-quotes -- consider text quoted by double quotes (")
-# ## backticks -- consider text quoted by backticks (`)
-# ## When handling quotes, escaped quotes (e.g. \") are handled correctly.
-# #quotation = "ignore"
-#
-# ## The preserve_newline option can be true or false (defaults to false).
-# ## If true, the newline character is preserved for multiline elements,
-# ## this is useful to preserve message-structure e.g. for logging outputs.
-# #preserve_newline = false
-#
-# #After the specified timeout, this plugin sends the multiline event even if no new pattern is found to start a new event. The default is 5s.
-# #timeout = 5s
-
-
-# ## Gather CPU metrics using Turbostat
-# [[inputs.turbostat]]
-# ## Path to the Turbostat exectuable if not in the PATH
-# # path = "/usr/bin/turbostat"
-#
-# ## Turbostat measurement interval
-# # interval = "10s"
-#
-# ## Use sudo to run the Turbostat executable
-# # use_sudo = false
-
-
-# # Read metrics from the Vault API
-# [[inputs.vault]]
-# ## URL for the Vault agent
-# # url = "http://127.0.0.1:8200"
-#
-# ## Use Vault token for authorization.
-# ## Vault token configuration is mandatory.
-# ## If both are empty or both are set, an error is thrown.
-# # token_file = "/path/to/auth/token"
-# ## OR
-# token = "s.CDDrgg5zPv5ssI0Z2P4qxJj2"
-#
-# ## Set response_timeout (default 5 seconds)
-# # response_timeout = "5s"
-#
-# ## Optional TLS Config
-# # tls_ca = /path/to/cafile
-# # tls_cert = /path/to/certfile
-# # tls_key = /path/to/keyfile
-
-
-# # Read metrics from one or many vCenters
-# [[inputs.vsphere]]
-# ## List of vCenter URLs to be monitored. These three lines must be uncommented
-# ## and edited for the plugin to work.
-# vcenters = [ "https://vcenter.local/sdk" ]
-# password = "secret"
-#
-# ## VMs
-# ## Typical VM metrics (if omitted or empty, all metrics are collected)
-# # vm_include = [ "/*/vm/**"] # Inventory path to VMs to collect (by default all are collected)
-# # vm_exclude = [] # Inventory paths to exclude
-# vm_metric_include = [
-# "cpu.demand.average",
-# "cpu.idle.summation",
-# "cpu.latency.average",
-# "cpu.readiness.average",
-# "cpu.ready.summation",
-# "cpu.run.summation",
-# "cpu.usagemhz.average",
-# "cpu.used.summation",
-# "cpu.wait.summation",
-# "mem.active.average",
-# "mem.granted.average",
-# "mem.latency.average",
-# "mem.swapin.average",
-# "mem.swapinRate.average",
-# "mem.swapout.average",
-# "mem.swapoutRate.average",
-# "mem.usage.average",
-# "mem.vmmemctl.average",
-# "net.bytesRx.average",
-# "net.bytesTx.average",
-# "net.droppedRx.summation",
-# "net.droppedTx.summation",
-# "net.usage.average",
-# "power.power.average",
-# "virtualDisk.numberReadAveraged.average",
-# "virtualDisk.numberWriteAveraged.average",
-# "virtualDisk.read.average",
-# "virtualDisk.readOIO.latest",
-# "virtualDisk.throughput.usage.average",
-# "virtualDisk.totalReadLatency.average",
-# "virtualDisk.totalWriteLatency.average",
-# "virtualDisk.write.average",
-# "virtualDisk.writeOIO.latest",
-# "sys.uptime.latest",
-# ]
-# # vm_metric_exclude = [] ## Nothing is excluded by default
-# # vm_instances = true ## true by default
-#
-# ## Hosts
-# ## Typical host metrics (if omitted or empty, all metrics are collected)
-# # host_include = [ "/*/host/**"] # Inventory path to hosts to collect (by default all are collected)
-# # host_exclude [] # Inventory paths to exclude
-# host_metric_include = [
-# "cpu.coreUtilization.average",
-# "cpu.costop.summation",
-# "cpu.demand.average",
-# "cpu.idle.summation",
-# "cpu.latency.average",
-# "cpu.readiness.average",
-# "cpu.ready.summation",
-# "cpu.swapwait.summation",
-# "cpu.usage.average",
-# "cpu.usagemhz.average",
-# "cpu.used.summation",
-# "cpu.utilization.average",
-# "cpu.wait.summation",
-# "disk.deviceReadLatency.average",
-# "disk.deviceWriteLatency.average",
-# "disk.kernelReadLatency.average",
-# "disk.kernelWriteLatency.average",
-# "disk.numberReadAveraged.average",
-# "disk.numberWriteAveraged.average",
-# "disk.read.average",
-# "disk.totalReadLatency.average",
-# "disk.totalWriteLatency.average",
-# "disk.write.average",
-# "mem.active.average",
-# "mem.latency.average",
-# "mem.state.latest",
-# "mem.swapin.average",
-# "mem.swapinRate.average",
-# "mem.swapout.average",
-# "mem.swapoutRate.average",
-# "mem.totalCapacity.average",
-# "mem.usage.average",
-# "mem.vmmemctl.average",
-# "net.bytesRx.average",
-# "net.bytesTx.average",
-# "net.droppedRx.summation",
-# "net.droppedTx.summation",
-# "net.errorsRx.summation",
-# "net.errorsTx.summation",
-# "net.usage.average",
-# "power.power.average",
-# "storageAdapter.numberReadAveraged.average",
-# "storageAdapter.numberWriteAveraged.average",
-# "storageAdapter.read.average",
-# "storageAdapter.write.average",
-# "sys.uptime.latest",
-# ]
-# ## Collect IP addresses? Valid values are "ipv4" and "ipv6"
-# # ip_addresses = ["ipv6", "ipv4" ]
-#
-# # host_metric_exclude = [] ## Nothing excluded by default
-# # host_instances = true ## true by default
-#
-#
-# ## Clusters
-# # cluster_include = [ "/*/host/**"] # Inventory path to clusters to collect (by default all are collected)
-# # cluster_exclude = [] # Inventory paths to exclude
-# # cluster_metric_include = [] ## if omitted or empty, all metrics are collected
-# # cluster_metric_exclude = [] ## Nothing excluded by default
-# # cluster_instances = false ## false by default
-#
-# ## Resource Pools
-# # resource_pool_include = [ "/*/host/**"] # Inventory path to resource pools to collect (by default all are collected)
-# # resource_pool_exclude = [] # Inventory paths to exclude
-# # resource_pool_metric_include = [] ## if omitted or empty, all metrics are collected
-# # resource_pool_metric_exclude = [] ## Nothing excluded by default
-# # resource_pool_instances = false ## false by default
-#
-# ## Datastores
-# # datastore_include = [ "/*/datastore/**"] # Inventory path to datastores to collect (by default all are collected)
-# # datastore_exclude = [] # Inventory paths to exclude
-# # datastore_metric_include = [] ## if omitted or empty, all metrics are collected
-# # datastore_metric_exclude = [] ## Nothing excluded by default
-# # datastore_instances = false ## false by default
-#
-# ## Datacenters
-# # datacenter_include = [ "/*/host/**"] # Inventory path to clusters to collect (by default all are collected)
-# # datacenter_exclude = [] # Inventory paths to exclude
-# datacenter_metric_include = [] ## if omitted or empty, all metrics are collected
-# datacenter_metric_exclude = [ "*" ] ## Datacenters are not collected by default.
-# # datacenter_instances = false ## false by default
-#
-# ## VSAN
-# # vsan_metric_include = [] ## if omitted or empty, all metrics are collected
-# # vsan_metric_exclude = [ "*" ] ## vSAN are not collected by default.
-# ## Whether to skip verifying vSAN metrics against the ones from GetSupportedEntityTypes API.
-# # vsan_metric_skip_verify = false ## false by default.
-#
-# ## Interval for sampling vSAN performance metrics, can be reduced down to
-# ## 30 seconds for vSAN 8 U1.
-# # vsan_interval = "5m"
-#
-# ## Plugin Settings
-# ## separator character to use for measurement and field names (default: "_")
-# # separator = "_"
-#
-# ## number of objects to retrieve per query for realtime resources (vms and hosts)
-# ## set to 64 for vCenter 5.5 and 6.0 (default: 256)
-# # max_query_objects = 256
-#
-# ## number of metrics to retrieve per query for non-realtime resources (clusters and datastores)
-# ## set to 64 for vCenter 5.5 and 6.0 (default: 256)
-# # max_query_metrics = 256
-#
-# ## number of go routines to use for collection and discovery of objects and metrics
-# # collect_concurrency = 1
-# # discover_concurrency = 1
-#
-# ## the interval before (re)discovering objects subject to metrics collection (default: 300s)
-# # object_discovery_interval = "300s"
-#
-# ## timeout applies to any of the api request made to vcenter
-# # timeout = "60s"
-#
-# ## When set to true, all samples are sent as integers. This makes the output
-# ## data types backwards compatible with Telegraf 1.9 or lower. Normally all
-# ## samples from vCenter, with the exception of percentages, are integer
-# ## values, but under some conditions, some averaging takes place internally in
-# ## the plugin. Setting this flag to "false" will send values as floats to
-# ## preserve the full precision when averaging takes place.
-# # use_int_samples = true
-#
-# ## Custom attributes from vCenter can be very useful for queries in order to slice the
-# ## metrics along different dimension and for forming ad-hoc relationships. They are disabled
-# ## by default, since they can add a considerable amount of tags to the resulting metrics. To
-# ## enable, simply set custom_attribute_exclude to [] (empty set) and use custom_attribute_include
-# ## to select the attributes you want to include.
-# ## By default, since they can add a considerable amount of tags to the resulting metrics. To
-# ## enable, simply set custom_attribute_exclude to [] (empty set) and use custom_attribute_include
-# ## to select the attributes you want to include.
-# # custom_attribute_include = []
-# # custom_attribute_exclude = ["*"]
-#
-# ## The number of vSphere 5 minute metric collection cycles to look back for non-realtime metrics. In
-# ## some versions (6.7, 7.0 and possible more), certain metrics, such as cluster metrics, may be reported
-# ## with a significant delay (>30min). If this happens, try increasing this number. Please note that increasing
-# ## it too much may cause performance issues.
-# # metric_lookback = 3
-#
-# ## Optional SSL Config
-# # ssl_ca = "/path/to/cafile"
-# # ssl_cert = "/path/to/certfile"
-# # ssl_key = "/path/to/keyfile"
-# ## Use SSL but skip chain & host verification
-# # insecure_skip_verify = false
-#
-# ## The Historical Interval value must match EXACTLY the interval in the daily
-# # "Interval Duration" found on the VCenter server under Configure > General > Statistics > Statistic intervals
-# # historical_interval = "5m"
-#
-# ## Specifies plugin behavior regarding disconnected servers
-# ## Available choices :
-# ## - error: telegraf will return an error on startup if one the servers is unreachable
-# ## - ignore: telegraf will ignore unreachable servers on both startup and gather
-# # disconnected_servers_behavior = "error"
-#
-# ## HTTP Proxy support
-# # use_system_proxy = true
-# # http_proxy_url = ""
-
-
-# # A Webhooks Event collector
-# [[inputs.webhooks]]
-# ## Address and port to host Webhook listener on
-# service_address = ":1619"
-#
-# ## Maximum duration before timing out read of the request
-# # read_timeout = "10s"
-# ## Maximum duration before timing out write of the response
-# # write_timeout = "10s"
-#
-# [inputs.webhooks.filestack]
-# path = "/filestack"
-#
-# ## HTTP basic auth
-# #username = ""
-# #password = ""
-#
-# [inputs.webhooks.github]
-# path = "/github"
-# # secret = ""
-#
-# ## HTTP basic auth
-# #username = ""
-# #password = ""
-#
-# [inputs.webhooks.mandrill]
-# path = "/mandrill"
-#
-# ## HTTP basic auth
-# #username = ""
-# #password = ""
-#
-# [inputs.webhooks.rollbar]
-# path = "/rollbar"
-#
-# ## HTTP basic auth
-# #username = ""
-# #password = ""
-#
-# [inputs.webhooks.papertrail]
-# path = "/papertrail"
-#
-# ## HTTP basic auth
-# #username = ""
-# #password = ""
-#
-# [inputs.webhooks.particle]
-# path = "/particle"
-#
-# ## HTTP basic auth
-# #username = ""
-# #password = ""
-#
-# [inputs.webhooks.artifactory]
-# path = "/artifactory"
-
-
-# # Gather data from a Zipkin server including trace and timing data
-# [[inputs.zipkin]]
-# ## URL path for span data
-# # path = "/api/v1/spans"
-#
-# ## Port on which Telegraf listens
-# # port = 9411
-#
-# ## Maximum duration before timing out read of the request
-# # read_timeout = "10s"
-# ## Maximum duration before timing out write of the response
-# # write_timeout = "10s"
-
projects / feed / packages.git / commitdiff