tty: serial: 8250_dma: keep own book keeping about RX transfers

After dmaengine_terminate_all() has been invoked then both DMA drivers
(edma and omap-dma) do not invoke dma_cookie_complete() to mark the
transfer as complete. This dma_cookie_complete() is performed by the
Synopsys DesignWare driver which is probably the only one that is used
by omap8250-dma and hence don't see following problem…
…which is that once a RX transfer has been terminated then following
query of channel status reports DMA_IN_PROGRESS (again: the actual
transfer has been canceled, there is nothing going on anymore).

This means that serial8250_rx_dma() never enqueues another DMA transfer
because it (wrongly) assumes that there is a transer already pending.

Vinod Koul refuses to accept a patch which adds this
dma_cookie_complete() to both drivers and so dmaengine_tx_status() would
report DMA_COMPLETE instead (and behave like the Synopsys DesignWare
driver already does). He argues that I am not allowed to use the cookie
to query the status and that the driver already cleaned everything up after
the invokation of dmaengine_terminate_all().

To end this I add a bookkeeping whether or not a RX-transfer has been
started to the 8250-dma code. It has already been done for the TX side.
*Now* we learn about the RX status based on our bookkeeping and don't
need dmaengine_tx_status() for this anymore.

Cc: [email protected]
Reviewed-by: Tony Lindgren <[email protected]>
Tested-by: Tony Lindgren <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 2292a4202425638dc84839eccb2011381a2182fe..712d1600c20609332338d98b221e747281f4c25e 100644 (file)
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -42,6 +42,7 @@ struct uart_8250_dma {
 
        unsigned char           tx_running:1;
        unsigned char           tx_err: 1;
+       unsigned char           rx_running:1;
 };
 
 struct old_serial_port {

diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 69e54abb6e7174df24adec69c99b5e877c4b136c..db9eda3c12d67d9541449557eab9993ce437f226 100644 (file)
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -61,6 +61,7 @@ static void __dma_rx_complete(void *param)
        dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
                                dma->rx_size, DMA_FROM_DEVICE);
 
+       dma->rx_running = 0;
        dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
        dmaengine_terminate_all(dma->rxchan);
 
@@ -123,10 +124,6 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 {
        struct uart_8250_dma            *dma = p->dma;
        struct dma_async_tx_descriptor  *desc;
-       struct dma_tx_state             state;
-       int                             dma_status;
-
-       dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
 
        switch (iir & 0x3f) {
        case UART_IIR_RLSI:
@@ -137,7 +134,7 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
                 * If RCVR FIFO trigger level was not reached, complete the
                 * transfer and let 8250_core copy the remaining data.
                 */
-               if (dma_status == DMA_IN_PROGRESS) {
+               if (dma->rx_running) {
                        dmaengine_pause(dma->rxchan);
                        __dma_rx_complete(p);
                }
@@ -146,7 +143,7 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
                break;
        }
 
-       if (dma_status)
+       if (dma->rx_running)
                return 0;
 
        desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
@@ -155,6 +152,7 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
        if (!desc)
                return -EBUSY;
 
+       dma->rx_running = 1;
        desc->callback = __dma_rx_complete;
        desc->callback_param = p;