ramips: Fix Hongdian H7920 v40 pinctrl default state

According to the MT7628 hardware datasheet:
- GPIO/4 was originally used for I2C, but is now used as the Modem Power.
- GPIO/5 was originally used for I2C, but is now used as the SIM card select. (n/a for this device)
- GPIO/6 was originally used for SPI CS1, but is now used as the Serial mode switch.
- GPIO/36 was originally used for PERST, but is now used as the GPS OE. (n/a for this device)
- GPIO/38 was originally used for WDT, but is now used as the Modem2 Power. (n/a for this device)
- GPIO/44 was used for WLED_AN, but is now controlled by `gpio-leds`.

Corrected pinctrl to ensure it works properly in the future.

Signed-off-by: Coia Prant <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/20256
(cherry picked from commit 44c79d094f4e3b3cd716a61783a0e2fde7ede976)
Link: https://github.com/openwrt/openwrt/pull/20257
Signed-off-by: Hauke Mehrtens <[email protected]>

diff --git a/target/linux/ramips/dts/mt7628an_hongdian_h7920-v40.dts b/target/linux/ramips/dts/mt7628an_hongdian_h7920-v40.dts
index 76c395c382e6d06b72055ef86bda3881cd923189..6c165fc3bfd1531d9867d80c7eb40892c258a3fe 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_hongdian_h7920-v40.dts
+++ b/target/linux/ramips/dts/mt7628an_hongdian_h7920-v40.dts
@@ -140,7 +140,7 @@
 
 &state_default {
        gpio {
-               groups = "i2s", "gpio", "refclk";
+               groups = "i2s", "i2c", "spi cs1", "gpio", "perst", "refclk", "wdt", "wled_an";
                function = "gpio";
        };
 };
@@ -166,6 +166,3 @@
        status = "okay";
 };
 
-&pcie {
-       status = "okay";
-};