ipq40xx: Use SoC DTSI for Teltonika RUTX

Teltonika RUTX currently is the only device pulling in DK01 DTSI and thus
preventing removal of DK01 and DK04 support.

So, lets add the missing nodes from DK01 DTSI and use the SoC DTSI instead.

Signed-off-by: Robert Marko <[email protected]>

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
index df9425b12a880ce7b1610303fcbdd9cc77c81eca..737e7365a6b80b9696af56ae468686df7a4127d8 100644 (file)
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
@@ -1,9 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include "qcom-ipq4019.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
        memory {
@@ -11,28 +12,39 @@
                reg = <0x80000000 0x10000000>;
        };
 
+       aliases {
+               serial0 = &blsp1_uart1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
        soc {
-               pinctrl@1000000 {
-                       mdio_pins: mdio_pinmux {
-                               mux_1 {
-                                       pins = "gpio53";
-                                       function = "mdio";
-                                       bias-pull-up;
-                               };
-                               mux_2 {
-                                       pins = "gpio52";
-                                       function = "mdc";
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c_0_pins: i2c_0_pinmux {
-                               mux {
-                                       pins = "gpio58", "gpio59";
-                                       function = "blsp_i2c0";
-                                       bias-disable;
-                               };
-                       };
+               tcsr@1949000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1949000 0x100>;
+                       qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+               };
+
+               tcsr@194b000 {
+                       status = "okay";
+
+                       compatible = "qcom,tcsr";
+                       reg = <0x194b000 0x100>;
+                       qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+               };
+
+               ess_tcsr@1953000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1953000 0x1000>;
+                       qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+               };
+
+               tcsr@1957000 {
+                       compatible = "qcom,tcsr";
+                       reg = <0x1957000 0x100>;
+                       qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
                };
 
                keys {
@@ -47,9 +59,91 @@
        };
 };
 
+&prng {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&cryptobam {
+       status = "okay";
+};
+
+&crypto {
+       status = "okay";
+};
+
+&tlmm {
+       serial_pins: serial_pinmux {
+               mux {
+                       pins = "gpio60", "gpio61";
+                       function = "blsp_uart0";
+                       bias-disable;
+               };
+       };
+
+       spi_0_pins: spi_0_pinmux {
+               pinmux {
+                       function = "blsp_spi0";
+                       pins = "gpio55", "gpio56", "gpio57";
+               };
+               pinmux_cs {
+                       function = "gpio";
+                       pins = "gpio54";
+               };
+               pinconf {
+                       pins = "gpio55", "gpio56", "gpio57";
+                       drive-strength = <12>;
+                       bias-disable;
+               };
+               pinconf_cs {
+                       pins = "gpio54";
+                       drive-strength = <2>;
+                       bias-disable;
+                       output-high;
+               };
+       };
+
+       mdio_pins: mdio_pinmux {
+               mux_1 {
+                       pins = "gpio53";
+                       function = "mdio";
+                       bias-pull-up;
+               };
+               mux_2 {
+                       pins = "gpio52";
+                       function = "mdc";
+                       bias-pull-up;
+               };
+       };
+
+       i2c_0_pins: i2c_0_pinmux {
+               mux {
+                       pins = "gpio58", "gpio59";
+                       function = "blsp_i2c0";
+                       bias-disable;
+               };
+       };
+};
+
+&blsp_dma {
+       status = "okay";
+};
+
+&blsp1_uart1 {
+       pinctrl-0 = <&serial_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
 &blsp1_spi1 {
+       pinctrl-0 = <&spi_0_pins>;
+       pinctrl-names = "default";
        cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
        num-cs = <2>;
+       status = "okay";
 
        xt25f128b@0 {
                /*
@@ -208,3 +302,23 @@
        pinctrl-names = "default";
        phy-reset-gpio = <&tlmm 62 0>;
 };
+
+&usb3_ss_phy {
+       status = "okay";
+};
+
+&usb3_hs_phy {
+       status = "okay";
+};
+
+&usb3 {
+       status = "okay";
+};
+
+&usb2_hs_phy {
+       status = "okay";
+};
+
+&usb2 {
+       status = "okay";
+};