mvebu: mark all mtd partitions on GL.iNet GL-MV1000 read-only

On this device, two of the three defined MTD partitions are
automatically set to read-only, since they do not end at an
erase/write block boundary.

In particular, the only partition remaining writable is the
one holding the u-boot bootloader.

Mark all of the partitions read-only, at least until a better
understanding of why the layout has been laid out this way is
gained.

Signed-off-by: Enrico Mioso <[email protected]>

diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index cdc91880ee5ad95232b251718b065ca163597319..acf15e8ca96d446ae5a61f8daca3bb8e37acfea5 100644 (file)
--- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -91,16 +91,19 @@
                        partition@0 {
                                label = "u-boot";
                                reg = <0 0xf0000>;
+                               read-only;
                        };
 
                        partition@f0000 {
                                label = "u-boot-env";
                                reg = <0Xf0000 0x8000>;
+                               read-only;
                        };
 
                        factory: partition@f8000 {
                                label = "factory";
                                reg = <0xf8000 0x8000>;
+                               read-only;
                        };
                };
        };