Add new variable defining ASQ command write back timeout to allow for
dynamic modification of this timeout. Initialize it on AQ initialize
routine with default value, vary it on device ID.
Change-ID: I5c9908f9d7c5455634353b694a986d6f146d1b9d
Signed-off-by: Kamil Krawczyk <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
/* Set up register offsets */
i40e_adminq_init_regs(hw);
+ /* setup ASQ command write back timeout */
+ hw->aq.asq_cmd_timeout = I40E_ASQ_CMD_TIMEOUT;
+
/* allocate the ASQ */
ret_code = i40e_init_asq(hw);
if (ret_code)
/* ugh! delay while spin_lock */
udelay(delay_len);
total_delay += delay_len;
- } while (total_delay < I40E_ASQ_CMD_TIMEOUT);
+ } while (total_delay < hw->aq.asq_cmd_timeout);
}
/* if ready, copy the desc back to temp */
struct i40e_adminq_info {
struct i40e_adminq_ring arq; /* receive queue */
struct i40e_adminq_ring asq; /* send queue */
+ u32 asq_cmd_timeout; /* send queue cmd write back timeout*/
u16 num_arq_entries; /* receive queue depth */
u16 num_asq_entries; /* send queue depth */
u16 arq_buf_size; /* receive queue buffer size */
/* Set up register offsets */
i40e_adminq_init_regs(hw);
+ /* setup ASQ command write back timeout */
+ hw->aq.asq_cmd_timeout = I40E_ASQ_CMD_TIMEOUT;
+
/* allocate the ASQ */
ret_code = i40e_init_asq(hw);
if (ret_code)
/* ugh! delay while spin_lock */
udelay(delay_len);
total_delay += delay_len;
- } while (total_delay < I40E_ASQ_CMD_TIMEOUT);
+ } while (total_delay < hw->aq.asq_cmd_timeout);
}
/* if ready, copy the desc back to temp */
struct i40e_adminq_info {
struct i40e_adminq_ring arq; /* receive queue */
struct i40e_adminq_ring asq; /* send queue */
+ u32 asq_cmd_timeout; /* send queue cmd write back timeout*/
u16 num_arq_entries; /* receive queue depth */
u16 num_asq_entries; /* send queue depth */
u16 arq_buf_size; /* receive queue buffer size */