OMAP4: clock: Fix multi-omap boot with reset un-used clocks

This patch uses "ENABLE_ON_INIT" flag on the emif clock nodes
to avoid the emif clk getting cut as part of reset un-used clock
routine which prevents boot.

Since "omap4xxx_clk_init()" calls "clk_enable_init_clocks()"
which increases the usecount on all ENABLE_ON_INIT clocks, it
prevents "omap2_clk_disable_unused()" from disabling the clock.

The real fix is to have driver for EMIF and do clock get/enable
as part of it. The EMIF driver is planned to be done HWMOD way
so till that available to keep omap3_defconfig booting on OMAP4430,
this patch is necessary.
(Will updated the auto-gen script for 44xx accordingly)

The fix was suggested by Paul Walmsley

Signed-off-by: Santosh Shilimkar <[email protected]>
Tested-by: Nishanth Menon <[email protected]>
Acked-by: Paul Walmsley <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>

diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 02804224517b26abb7460f1ebd98ff5c266e0dea..e10db7a90cb270f5f833cd1b9076bd7b6cb38356 100644 (file)
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -1369,6 +1369,7 @@ static struct clk emif1_ick = {
        .ops            = &clkops_omap2_dflt,
        .enable_reg     = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
        .enable_bit     = OMAP4430_MODULEMODE_HWCTRL,
+       .flags          = ENABLE_ON_INIT,
        .clkdm_name     = "l3_emif_clkdm",
        .parent         = &ddrphy_ck,
        .recalc         = &followparent_recalc,
@@ -1379,6 +1380,7 @@ static struct clk emif2_ick = {
        .ops            = &clkops_omap2_dflt,
        .enable_reg     = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
        .enable_bit     = OMAP4430_MODULEMODE_HWCTRL,
+       .flags          = ENABLE_ON_INIT,
        .clkdm_name     = "l3_emif_clkdm",
        .parent         = &ddrphy_ck,
        .recalc         = &followparent_recalc,