The Radxa ROCK 5C (Lite) is a single board computer using the Rockchip
RK3588S2 (RK3582) SoC.
- https://radxa.com/products/rock5/5c
Hardware
--------
- Quad (Dual) Cortex-A76 and Quad Cortex-A55 CPU
- Mali-G610 MP4 GPU (5C only)
- 6 (5) TOPS NPU
- 1/2/4/8/16/32GB LPDDR4X RAM
- eMMC/SPI NOR flash connector
- microSD card slot
- Wi-Fi 6 (AIC8800D80, not yet supported)
- Gigabit Ethernet port with PoE (additional PoE HAT required)
- USB 3.1 Gen1 Type-A HOST/OTG port
- USB 3.1 Gen1 Type-A HOST port
- 2x USB 2.0 Type-A HOST ports
- FPC connector with PCIe 2.1 x1
- PWM fan connector
- 20x2 pin header
- USB Type-C power port
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
eMMC using dd.
Signed-off-by: FUKAUMI Naoki <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/19867
Signed-off-by: Hauke Mehrtens <[email protected]>
radxa_rock-5a
endef
+define U-Boot/rock-5c-rk3588s
+ $(U-Boot/rk358x/Default)
+ NAME:=ROCK 5C/5C Lite
+ BUILD_DEVICES:= \
+ radxa_rock-5c
+endef
+
UBOOT_TARGETS := \
nanopc-t4-rk3399 \
nanopi-r4s-rk3399 \
sige7-rk3588 \
nanopi-r6c-rk3588s \
nanopi-r6s-rk3588s \
- rock5a-rk3588s
+ rock5a-rk3588s \
+ rock-5c-rk3588s
UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes
set_interface_core 20 "eth1"
set_interface_core 40 "eth2"
;;
-radxa,rock-5a)
+radxa,rock-5a|\
+radxa,rock-5c)
set_interface_core 10 "eth1"
set_interface_core 20 "eth2"
;;
endef
TARGET_DEVICES += radxa_rock-5b-plus
+define Device/radxa_rock-5c
+ DEVICE_VENDOR := Radxa
+ DEVICE_MODEL := ROCK 5C/5C Lite
+ SOC := rk3588s
+ DEVICE_PACKAGES := blkdiscard block-mount kmod-ata-ahci kmod-hwmon-pwmfan kmod-nvme kmod-r8169
+endef
+TARGET_DEVICES += radxa_rock-5c
+
define Device/radxa_rock-5t
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 5T