kernel: add support for Fudan Micro FM25S01BI3 SPI-NAND

Add support for Fudan Micro FM25S01BI3 SPI NAND.
Link: https://www.fmsh.com/nvm/FM25S01BI3_ds_eng.pdf
Signed-off-by: Mikhail Zhilkin <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/20872
Signed-off-by: Hauke Mehrtens <[email protected]>

diff --git a/target/linux/generic/pending-6.12/403-mtd-spinand-add-support-for-FudanMicro-FM25S01BI3.patch b/target/linux/generic/pending-6.12/403-mtd-spinand-add-support-for-FudanMicro-FM25S01BI3.patch
new file mode 100644 (file)
index 0000000..f353442
--- /dev/null
+++ b/target/linux/generic/pending-6.12/403-mtd-spinand-add-support-for-FudanMicro-FM25S01BI3.patch
@@ -0,0 +1,117 @@
+To: Miquel Raynal <[email protected]>,
+ Richard Weinberger <[email protected]>, Vignesh Raghavendra <[email protected]>,
+ Tudor Ambarus <[email protected]>, Mark Brown <[email protected]>
+Cc: [email protected], [email protected]
+From: Mikhail Zhilkin <[email protected]>
+Subject: [PATCH] mtd: spinand: add support for FudanMicro FM25S01BI3
+
+Add support for FudanMicro FM25S01BI3 SPI NAND.
+
+Link: https://www.fmsh.com/nvm/FM25S01BI3_ds_eng.pdf
+
+Signed-off-by: Mikhail Zhilkin <[email protected]>
+Link: https://lore.kernel.org/linux-mtd/[email protected]
+---
+ drivers/mtd/nand/spi/fmsh.c | 72 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 72 insertions(+)
+
+--- a/drivers/mtd/nand/spi/fmsh.c
++++ b/drivers/mtd/nand/spi/fmsh.c
+@@ -9,6 +9,13 @@
+ #include <linux/kernel.h>
+ #include <linux/mtd/spinand.h>
+ 
++#define FM25S01BI3_STATUS_ECC_MASK            (7 << 4)
++      #define FM25S01BI3_STATUS_ECC_NO_BITFLIPS       (0 << 4)
++      #define FM25S01BI3_STATUS_ECC_1_3_BITFLIPS      (1 << 4)
++      #define FM25S01BI3_STATUS_ECC_UNCOR_ERROR       (2 << 4)
++      #define FM25S01BI3_STATUS_ECC_4_6_BITFLIPS      (3 << 4)
++      #define FM25S01BI3_STATUS_ECC_7_8_BITFLIPS      (5 << 4)
++
+ #define SPINAND_MFR_FMSH              0xA1
+ 
+ static SPINAND_OP_VARIANTS(read_cache_variants,
+@@ -45,11 +52,66 @@ static int fm25s01a_ooblayout_free(struc
+       return 0;
+ }
+ 
++static int fm25s01bi3_ecc_get_status(struct spinand_device *spinand,
++                                   u8 status)
++{
++      switch (status & FM25S01BI3_STATUS_ECC_MASK) {
++      case FM25S01BI3_STATUS_ECC_NO_BITFLIPS:
++              return 0;
++
++      case FM25S01BI3_STATUS_ECC_UNCOR_ERROR:
++              return -EBADMSG;
++
++      case FM25S01BI3_STATUS_ECC_1_3_BITFLIPS:
++              return 3;
++
++      case FM25S01BI3_STATUS_ECC_4_6_BITFLIPS:
++              return 6;
++
++      case FM25S01BI3_STATUS_ECC_7_8_BITFLIPS:
++              return 8;
++
++      default:
++              break;
++      }
++
++      return -EINVAL;
++}
++
++static int fm25s01bi3_ooblayout_ecc(struct mtd_info *mtd, int section,
++                                  struct mtd_oob_region *region)
++{
++      if (section)
++              return -ERANGE;
++
++      region->offset = 64;
++      region->length = 64;
++
++      return 0;
++}
++
++static int fm25s01bi3_ooblayout_free(struct mtd_info *mtd, int section,
++                                   struct mtd_oob_region *region)
++{
++      if (section > 3)
++              return -ERANGE;
++
++      region->offset = (16 * section) + 4;
++      region->length = 12;
++
++      return 0;
++}
++
+ static const struct mtd_ooblayout_ops fm25s01a_ooblayout = {
+       .ecc = fm25s01a_ooblayout_ecc,
+       .free = fm25s01a_ooblayout_free,
+ };
+ 
++static const struct mtd_ooblayout_ops fm25s01bi3_ooblayout = {
++      .ecc = fm25s01bi3_ooblayout_ecc,
++      .free = fm25s01bi3_ooblayout_free,
++};
++
+ static const struct spinand_info fmsh_spinand_table[] = {
+       SPINAND_INFO("FM25S01A",
+                    SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE4),
+@@ -60,6 +122,16 @@ static const struct spinand_info fmsh_sp
+                                             &update_cache_variants),
+                    0,
+                    SPINAND_ECCINFO(&fm25s01a_ooblayout, NULL)),
++      SPINAND_INFO("FM25S01BI3",
++                   SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xd4),
++                   NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
++                   NAND_ECCREQ(8, 512),
++                   SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++                                            &write_cache_variants,
++                                            &update_cache_variants),
++                   SPINAND_HAS_QE_BIT,
++                   SPINAND_ECCINFO(&fm25s01bi3_ooblayout,
++                                    fm25s01bi3_ecc_get_status)),
+ };
+ 
+ static const struct spinand_manufacturer_ops fmsh_spinand_manuf_ops = {