wl1271: Add pre-power-on sleep

This patch adds a short delay before powering on the wl1271. Normally, it is
not needed, but if the wl1271 has been powered off shortly before, for reliable
firmware-booting this small stabilization delay is required.

Signed-off-by: Juuso Oikarinen <[email protected]>
Reviewed-by: Luciano Coelho <[email protected]>
Signed-off-by: Luciano Coelho <[email protected]>
Signed-off-by: John W. Linville <[email protected]>

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 81e1c9531a3a434e53938fc0b955872b40f76fae..c965c4a718f36f076afbbdefc38ccfc50d321998 100644 (file)
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -458,7 +458,9 @@ int wl1271_plt_stop(struct wl1271 *wl);
 
 #define WL1271_TX_QUEUE_MAX_LENGTH 20
 
-/* WL1271 needs a 200ms sleep after power on */
+/* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
+   on in case is has been shut down shortly before */
+#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
 #define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
 
 static inline bool wl1271_11a_enabled(void)

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 0795bf3c60da8c393f48d3941b3ad9187344fea4..0520b38e8e727f3c6d292b741a61e8fe4cbcee39 100644 (file)
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -618,6 +618,7 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
        struct wl1271_partition_set partition;
        int ret = 0;
 
+       msleep(WL1271_PRE_POWER_ON_SLEEP);
        wl1271_power_on(wl);
        msleep(WL1271_POWER_ON_SLEEP);
        wl1271_spi_reset(wl);