git.openwrt.org Git - openwrt/staging/linusw.git/blob

   1 From e0c78d59082aaadb95fc301af239c991686a1822 Mon Sep 17 00:00:00 2001
   2 From: Dave Stevenson <dave.stevenson@raspberrypi.com>
   3 Date: Wed, 8 May 2024 18:05:08 +0100
   4 Subject: [PATCH 1085/1085] dts: bcm2712: Drop snd_bcm2835 bootargs references
   5  from Pi5
   6
   7 Pi5 has no VCHIQ to support the snd_bcm2835 firmware audio
   8 driver, so remove the reference to it from bootargs.
   9
  10 https://forums.raspberrypi.com/viewtopic.php?p=2219395#p2219395
  11
  12 Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
  13 ---
  14  arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts  | 2 +-
  15  arch/arm/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi | 2 +-
  16  2 files changed, 2 insertions(+), 2 deletions(-)
  17
  18 --- a/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts
  19 +++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts
  20 @@ -426,7 +426,7 @@ dpi_16bit_gpio2:        &rp1_dpi_16bit_g
  21
  22  / {
  23         chosen: chosen {
  24 -               bootargs = "reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
  25 +               bootargs = "reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe";
  26                 stdout-path = "serial10:115200n8";
  27         };
  28
  29 --- a/arch/arm/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
  30 +++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
  31 @@ -426,7 +426,7 @@ dpi_16bit_gpio2:        &rp1_dpi_16bit_g
  32
  33  / {
  34         chosen: chosen {
  35 -               bootargs = "reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
  36 +               bootargs = "reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe";
  37                 stdout-path = "serial10:115200n8";
  38         };
  39